Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across High Point
Door installation in High Point is rarely a simple swap. Most homes in this 55+ manufactured-home community date from the 1970s and 1980s, and the original aluminum entry doors have spent forty or fifty years in salt-laden Gulf air. That means corroded jamb screws, worn hinge pins, and side lites that don’t meet Pinellas County’s current impact-glazing rule. We’ve worked enough lots off Ridgeland Drive and the side streets branching toward High Point’s clubhouse to know what we’re walking into before we unload the truck. If you need a straight answer about whether your door can be repaired or has to be replaced, call (813) 320-9346 and we’ll tell you what we’d do if it were our place.
Why TruePane Windows & Doors Is High Point’s Preferred Door Installation Company
TruePane has spent more than four decades fixing the kind of work that leaves a homeowner with a door that binds in July and a warranty that means nothing. Dale Kessler founded this company on a rule he keeps on the whiteboard: if the pane is not true, the job is not done. Around High Point, that rule gets tested every time a homeowner discovers the original door frame has twisted out of square because the manufactured home’s piers settled. We measure every opening twice. Then we measure again before ordering. That’s not caution. That’s knowing what salt air and forty years of humidity do to thin-gauge aluminum.
High Point homeowners tend to be people who’ve lived in their homes for twenty years or more. They’ve been burned once. They call us because a neighbor on Clover Hill or a friend near the shuffleboard courts had a TruePane crew out and saw how we handled it: uniformed, background-checked, no mess left on the shared walkway, no surprise line items on the bill. We carry The Keystone Standard on every job, which means both manufacturer warranty layers get registered in writing before the truck leaves the driveway. And if something’s not right, our 90-Day Done Right Promise means we come back and make it right without making you fight for it.
Dispatch and scheduling for High Point is coordinated from our South FL metro office, but the crews who arrive at your lot work this area regularly. They know the lot-line constraints, the county inspection expectations, and how to keep a job moving without spraying a neighbor’s car or blocking a narrow street. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. A person, usually within a couple rings.
Our Door Installation Services in High Point
Most High Point lots share the same constraints: a tight side yard, a neighbor’s lanai six feet away, and a front entry that was built when Florida’s wind-load rules were a different animal. That shapes every service we offer. Here’s how each applies to homes in this community. For the broader scope of our work, you can review our full Door Installation capabilities.
Entry & Swing Doors
The typical High Point entry door from the 1970s or 1980s is an aluminum slab with a single-pane side lite that doesn’t meet Pinellas County’s impact-glazing code. Replacing just the slab is usually the wrong call. Pinellas County requires impact-rated glazing for any door that has glass, and once the existing jamb is opened up, corrosion damage is almost always worse than it looked from the outside. We install impact-rated entry doors with fusion-welded frames that handle High Point’s wind zone the way the original door never did.
Storm Doors
A storm door that looked like an easy swap often becomes a full frame replacement here. The original aluminum storm door’s hinge pins and mortise lock get seized by salt corrosion, and the slab binds in the jamb. In a dense lot where you can’t repaint without over-spraying a neighbor’s car, the fix is to pull the old frame, address the jamb, and set a new storm door that’s square and impact-rated where the glass requires it. We do that in a single visit on most High Point properties.
Double & French Doors
Some High Point homes upgraded over the years with double French doors leading to a small patio or garden alcove. But many of those were installed when the rough opening had already drifted out of square. We shim, flash, and seal the new units so the active leaf lands clean on the strike plate, which is the part most installers never get right on a settling manufactured home. Our crews check the reveal on both leaves before a single screw is driven.
Pivot Doors
A pivot door isn’t common in High Point, but a homeowner replacing a front entry sometimes wants one. On a manufactured home, the structural framing around a standard 36-inch opening rarely supports a true pivot hinge without a reinforced header. We’ll quote it honestly, including the framing work, or we’ll tell you why a swing door makes more sense for your wall framing. Either way, you’ll see the numbers on paper before we order anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in High Point
TruePane is an authorized installer for more than a dozen manufacturer lines, and for High Point’s manufactured homes we most often quote Andersen, PGT, and ES Windows for entry and storm doors with impact-rated glass. When you’re looking at a side-by-side quote for a door that must pass Pinellas County inspection, you want to see spec sheets, not hear sales talk. We bring the spec sheets. We also stock common replacement hardware and weatherstripping that fits the older aluminum frames still in use around High Point, which keeps turnaround faster than waiting on a regional warehouse.
Common Door Installation Problems We See in High Point Homes
- Corrosion-seized storm door hardware. The original aluminum storm door’s hinge pins and mortise lock seize from decades of salt-laden Tampa Bay air. Once the hinge pins are seized, the slab can’t be rehung properly, and the door starts binding at the latch. Repainting is rarely an option on a tight lot because over-spray drifts onto the neighbor’s car or lanai.
- Settled piers twist the rough opening out of square. High Point’s manufactured homes sit on piers, and after forty years some piers settle unevenly. The door opening goes trapezoidal, a stock 36-inch prehung door binds, and the latch won’t line up. Most general handymen miss this and blame the door. We measure the opening at three heights before ordering anything.
- Non-impact glass fails inspection on a replacement door. A homeowner brings in an unpermitted front door with standard tempered glass, and a neighbor reports the work. Pinellas County issues a stop-work order. Now the homeowner pays for a second full door order plus reinstallation. We flag this before it happens and pull the permit the first time.
- Jalousie windows adjacent to the door complicate the permit. A High Point homeowner replacing the front door often has a jalousie window next to it. Pinellas County’s code treats the whole opening assembly as one envelope. We’ll explain what that means for your specific layout before you spend a dollar, so the inspection passes clean the first visit.
Pricing for Door Installation in High Point, FL
In High Point, a standard entry door replacement with an impact-rated slab, new frame, and weathered-in jamb typically runs $1,800 to $3,400. A storm door replacement lands between $900 and $1,800 depending on whether the existing frame is sound or has corrosion that has to be cut out. A side lite retrofit to bring the glazing into impact compliance adds $600 to $1,200 per lite. Pivot doors and custom-width units run higher because the framing work is site-specific to your wall. What actually drives the price on a High Point lot is access: if staging has to happen on a narrow sidewalk and the neighbor’s lanai sits six feet from your entry, that changes the sequence and the labor. We’ll give you a line-item quote on paper, registered warranties from the manufacturer, and a fixed price with no change orders. Call (813) 320-9346 to schedule a free estimate.
We Also Serve Cities Near High Point
Our Door Installation in High Point crews also cover Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re a few minutes outside the community gates and wondering whether your manufactured home has the same salt-corrosion or jamb-twist problems we see every week in High Point, call and ask. We’ll tell you what to look for.
Serving High Point, FL - Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in High Point
In many cases, yes. Pinellas County’s building code treats the entry assembly as one envelope, and when a jalousie window sits adjacent to a door opening, the county expects any new work on that wall to bring the glazing into compliance. A jalousie window can’t be feasibly weatherized or retrofitted to meet Florida’s impact requirements, which means the window usually becomes a full replacement when the door work is permitted. We’ll walk you through exactly what applies to your specific opening before you commit. Call (813) 320-9346 for an exact quote.
We stage the new door panel and fusion-welded frame on our truck or a narrow sidewalk strip, never on a neighbor’s property. On a tight lot off Ridgeland Drive, our crew set an impact-rated entry door panel on a sidewalk while the neighbor’s lanai sat six feet away. We finished the jamb replacement and flashing tape in one workday, kept the hammering inside county quiet hours, and left the walkway broom-clean. We also coordinate parking before the job so we’re not blocking the lane for a neighbor’s golf cart or delivery, and the quote reflects the access workflow from the start.
In Pinellas County, a storm door replacement can be treated as a repair if the frame is sound and no glass lite is added or changed to non-impact glazing. But once you touch the jamb or replace a door with glass, the permit requirement kicks in, and the glazing has to meet impact standards. High Point homes from the 1970s and 1980s often have corroded jambs that make a “storm door only” repair impossible anyway. We’ll check the frame and tell you straight whether this is a repair or a permitted replacement before any work begins. Call (813) 320-9346 to talk it through.
It depends on whether the problem is the door slab, the jamb, or the rough opening. In High Point, settled piers frequently twist the rough opening out of square, and a stock replacement door will bind the same way the old one did. We measure the opening at three heights and check the slab for racking before recommending anything. Sometimes we can correct the jamb and rehang the leaf. More often on these 1970s and 1980s manufactured homes, the frame is rotted or corroded enough that a full replacement with a custom-width unit is the honest answer. We’ll show you why on paper. Call (813) 320-9346 for a free assessment.
Not always. Many High Point manufactured homes were built with door openings that are not a true 36 inches after trim and settling. A standard prehung door will bind at the latch or sit proud of the interior wall if the rough opening has drifted. We measure the rough opening, account for the pier-settled frame, and either shim within tolerance or order a custom-width door and jamb set that fits the actual opening. That’s the difference between a door that closes for five years and one that closes for thirty. Call (813) 320-9346 and we’ll measure before you spend a cent.
Contact TruePane Windows & Doors for Door Installation in High Point
If your High Point door binds, leaks, whistles in a Gulf wind, or carries non-impact glass adjacent to a jalousie window, it’s time for a straight answer. We’re not the cheapest bid in high Point. We’re the company you call when you want it done right the first time, with both warranty layers registered in writing and a 90-Day Done Right Promise behind the work. Call (813) 320-9346 for a free, no-surprise estimate. A live person answers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving High Point through a second-generation glazier’s commitment to square work and square dealing.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.