Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Hillsboro Beach
Door installation in Hillsboro Beach runs $1,800-$9,400 for most single and double door replacements, and $4,200-$18,000 for impact-rated doors with full frame and jamb replacement. That range widens quickly on older oceanfront homes, for reasons we’ll get into below. TruePane Windows & Doors has been setting doors on this barrier island for years, and we know what the salt air does to frames, hinges, and thresholds here better than most. If you’re ready to talk numbers for your specific opening, call us at (813) 320-9346 and we’ll walk you through what the job needs and what it’ll cost.
Why TruePane Windows & Doors Is Hillsboro Beach’s Preferred Door Installation Company
We’re not a franchise crew that got dropped into Broward County last spring. TruePane was founded in 2008 by second-generation glazier Dale Kessler, and the company carries years of craft tradition into every opening we touch. Hillsboro Beach homeowners call us because we show up when we say we will, measure every opening twice, and put the numbers in writing before any work starts. The people answering the phone know door framing, not just a script. A live person picks up 24 hours a day, seven days a week.
What that means for you on Hillsboro Beach: a technician who knows that an A1A oceanfront condo has different hardware requirements than a home a quarter mile west on the Intracoastal side. We’ve pulled rotted jambs, reframed undersized rough openings, and set Miami-Dade NOA-approved impact doors on both sides of this island. Our crews are background-checked, uniformed, and treat your entryway like their own mother’s front hall. And every job carries the 90-Day Done Right Promise: if it isn’t done right, we make it right with no paperwork fight attached.
Our Door Installation Services in Hillsboro Beach
Impact-Rated Entry & Swing Doors
Most of the Door Installation work we do on Hillsboro Beach involves impact-rated entry doors, because Broward County’s High-Velocity Hurricane Zone code doesn’t budge. A single swing door with a NOA-approved impact system typically runs $3,800-$8,200 on this island, depending on glass lite count and hardware grade. We set the frame square, flash it with marine-grade tape, and register both warranty layers in writing before the truck leaves your driveway. Every time.
Double & French Doors
Sliding & Patio Doors - Hillsboro Beach aside, double and French doors are common on Hillsboro Beach condos and single-family homes that open onto Intracoastal or ocean-facing patios. Here’s where the salt air gets expensive: we routinely find the active door has eaten through its bottom sweep and the passive door’s flush bolts are seized solid inside the frame. A true impact-rated double door with full frame and jamb replacement runs $6,500-$14,000 on this island. We quote Andersen, Pella, Marvin, PGT, and CGI side by side on paper so you see exactly what you’re buying.
Bifold & Folding Doors
Bifold and folding doors are the halfway point between a wall and a door, and on Hillsboro Beach they demand more than a mainland install. The oceanfront side of A1A pushes wind-driven rain at these panels at speeds that find every gap in weather stripping. We spec stainless-steel rollers and marine-rated track systems on every folding door we set here. Plan on $9,000-$22,000 for a quality impact-rated bifold, with larger openings at the top of that range.
Pivot Doors
Pivot doors make a statement, and Hillsboro Beach has no shortage of homes built to make statements. But a pivot door on a 1970s concrete-block home often means the rough opening is undersized for the pivot hinge’s load requirements. We open the framing, inspect what’s actually there, and size the opening to the door properly. A typical pivot door replacement in Hillsboro Beach runs $5,500-$12,000 before custom glass or hardware upgrades. The installation has to be dead plumb, or a 400-pound pivot panel will bind in July humidity. There’s no faking it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsboro Beach
We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, and CGI. For Hillsboro Beach specifically, we lean on PGT and CGI for impact-rated systems because they’ve both proven themselves in Broward County’s HVHZ market and we can get product quickly when a rush job comes up. We also stock marine-grade hardware and common replacement parts locally in South Florida, which means Viewlux repair in Hillsboro Beach or a seized latch on your oceanfront condo doesn’t sit for two weeks waiting on a truck from Ohio. If you have a brand preference, we’ll quote it. If you’re unsure what to buy, we’ll put two comparable manufacturer lines side by side on paper and explain the difference in plain language.
Common Door Installation Problems We See in Hillsboro Beach Homes
- Salt-air pitting on hardware and frames. Oceanfront doors here eat standard hinges, locks, and weatherstripping in five to seven years. We see locks that bind shut, handles that flake, and frames that oxidize to white dust on the A1A side of the island.
- Undersized or rotted rough openings in 1960s-1990s construction. A lot of Hillsboro Beach’s housing stock predates current impact code. The existing opening is often too small for a Miami-Dade NOA-approved door, and once we open it, we find framing that’s been wicking moisture for decades.
- Failed threshold waterproofing. Wind-driven rain and storm surge get behind stucco at the base of the door and rot the subfloor from underneath. The door can look fine while the structure under it is turning to pulp, and a careful inspection is the only way to catch it before the door starts sagging.
- Condo association matching requirements. Board approval on Hillsboro Beach condos often means the door style, color, and finish have to match the building’s approved look, product line, and installation method.
On a 1970s oceanfront home off A1A, our crew pulled a corroded sliding glass door and found the original jamb was powder. The aluminum had oxidized to white dust from decades of sea spray. The rough opening was undersized and the flashing tape had peeled away, so we reframed to current HVHZ dimensions, set a Miami-Dade NOA-approved impact-rated door with stainless-steel hardware, and flashed the opening with marine-grade tape before the board-approved finish went on. That’s what we mean when we say we set doors on this island the way the conditions demand.
Because Hillsboro Beach is a narrow barrier island with salt air off the Atlantic on one side and Intracoastal spray on the other, even ‘marine-grade’ aluminum door hardware corrodes through in as little as five to seven years. So our installs here spec stainless-steel hinges and locks plus factory-applied marine-rated coatings, a step rarely needed just a few miles inland on the mainland. It’s not an upcharge. It’s the correct material for the job.
Pricing for Door Installation in Hillsboro Beach, FL
Here’s what we see on this island, based on the jobs we’ve priced in the last two years. A basic single entry door with impact glass runs $3,800-$8,200. A double or French door with full frame replacement runs $6,500-$14,000. A large bifold or pivot door with NOA-approved impact ratings starts at $9,000 and can exceed $22,000 on oceanfront properties with custom hardware. The numbers move based on what’s behind the stucco once we open the opening, whether the frame needs reframing to HVHZ dimensions, and what the association requires for finish and appearance. We write the allowance into the contract before any cutting starts, and any surprise is priced and approved by you in writing before we touch it. Call (813) 320-9346 for a free, written line-item estimate.
We Also Serve Cities Near Hillsboro Beach
Our crews cover Door Installation in Hillsboro Beach and the surrounding communities. If you live in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, we send the same background-checked, uniformed technicians and the same 90-Day Done Right Promise. The drive is short, and the standard is the same: if the door is not set true, the job is not done.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Hillsboro Beach
Yes. Every door replacement in Hillsboro Beach requires a permit because the town sits entirely within Broward County’s High-Velocity Hurricane Zone, and any impact-rated door must be approved by Miami-Dade NOA standards. The building department requires the inspector to see the rough opening and the anchoring system before the door is closed up. That means we open the wall, expose the framing, and check what’s actually there. We build this inspection into the quote, so the permit triggers a process we already planned for, not a surprise that shows up mid-job.
Yes. We match the association’s approved style, color, and finish, and we handle the board approval paperwork based on the building’s specific filing requirements. For oceanfront units, we typically recommend a factory-coated marine-rated finish with stainless-steel hardware, which outlasts field-applied paint jobs in the salt air. Call (813) 320-9346 and we’ll walk you through the process.
Because Hillsboro Beach is a narrow barrier island with salt-laden onshore winds from the Atlantic on one side and Intracoastal spray on the other. The same hardware that lasts a decade in Pompano Beach proper will start pitting and binding here in five to seven years. That’s why we spec stainless-steel hinges and locks on every install, and why ‘marine grade’ without a factory-applied coating doesn’t cut it on this island.
We reframe the opening to the required dimensions. This means removing the surrounding material, inspecting the underlying studs and header, replacing anything that’s water-damaged or undersized, and setting the new frame to HVHZ anchoring requirements. The cost is written as a line item in the contract before we start, and if we find additional damage once the wall is open, we show you exactly what’s there, price it in writing, and get your approval before we proceed. No one ever gets a bill for work they didn’t approve.
Sometimes the slab can be replaced, but most Hillsboro Beach homes we see need the full frame and jamb replaced. The original aluminum or steel jamb is often corroded, and the rough opening must be inspected and re-flashed to meet current code before the new slab goes in. We’ll tell you honestly which option your home needs and why. Our goal isn’t to sell a bigger job. It’s to set a door that doesn’t bind in July and doesn’t leak in a storm. Call (813) 320-9346 for a free estimate.
Key Takeaways
- Door installation in Hillsboro Beach costs between $1,800 and $22,000 depending on door type, impact rating, and framing condition.
- Every replacement requires a permit and must meet Miami-Dade NOA-approved impact standards.
- Salt air from the Atlantic and Intracoastal corrodes standard door hardware in five to seven years.
- We spec stainless-steel hardware and marine-rated coatings as a matter of course, not an upsell.
- The 90-Day Done Right Promise covers every job on this island. If it isn’t done right, we make it right.
Call TruePane Windows & Doors in Hillsboro Beach
When you’re ready to price a new door, call us at (813) 320-9346. A live person answers. We’ll talk through what you have, what it needs, and what it’ll cost, and then we’ll set a time to measure the opening twice and put the numbers in writing. No pressure, no fine print, no surprises. Just a square deal and a door that’s set true.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach with a craft standard passed down through two generations of glaziers.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.