Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Jupiter
A new front door or patio door in Jupiter typically runs $1,800 to $6,800 installed, and the two things that influence the final number most are the Florida Product Approval paperwork and whether an HOA architectural board has to sign off on the style. Most Jupiter homes we work on sit in Palm Beach County’s coastal wind zone, which means nearly every permitted door replacement is an impact-rated job, not a simple swap. TruePane Windows & Doors has performed Door Installation across Jupiter for years, and we handle the permit, the FPA documentation, and the final inspection so you’re not left holding a stack of paperwork. If you need a straight answer on your door, call (813) 320-9346.
Why TruePane Windows & Doors Is Jupiter’s Preferred Door Installation Company
We’re a second-generation glazier’s operation, not a franchise that parachutes crews into Jupiter from three counties away. Dale Kessler founded this company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. That applies to every door slab we hang, every hinge we set, every sill we flash.
Jupiter homeowners call us because we know what the wind zone demands. We know a standard anodized aluminum door frame near the Inlet will start oxidizing in three to five years. We know Abacoa’s ARC board wants specific frame colors and will reject a deviation without a hearing. We know the permitting office in Palm Beach County won’t accept a door without a valid FPA number for the 160 to 170 mph design wind speed. That knowledge means fewer surprises on the bill and fewer rescheduled inspections.
We show up when we say. Background-checked, uniformed technicians measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. That’s The Keystone Standard, and it’s in writing on every job.
Our Door Installation Services in Jupiter
Entry & Swing Doors
A front entry door in Jupiter does more than welcome people; it’s the first line of defense against wind-driven rain and salt air. We install Impact Windows & Doors - Jupiter rated fiberglass and steel entry systems with multi-point locks, and we’re an authorized installer for Andersen, Pella, and Marvin. In older Jupiter subdivisions off US-1 where original 1970s steel doors have rusted at the threshold, we replace the slab, the frame, and the weatherstripping so the door closes square and seals tight. Entry doors in Jupiter generally run $2,200 to $5,500 installed depending on slab material, glass package, and hardware.
Double & French Doors
French doors are popular in Jupiter ranches that open onto a lanai or pool deck, but the original double doors on many 1980s and 1990s homes were never rated for this wind zone. We replace them with Energy-Efficient Windows - Jupiter rated, fusion-welded frame units with low-E argon-filled glass. The trick with double doors is getting both slabs to meet dead center and seal against each other. In a house near The Bluffs or along the Loxahatchee River corridor, a racked French door lets salt air in year-round. Expect $3,800 to $7,500 for a properly flashed and impact-rated double door installation in Jupiter.
Storm Doors
A storm door in Jupiter serves two purposes: it’s a sacrificial layer against coastal weather and an extra ventilation point in the wet season. We install full-view and ventilating storm doors sized to the existing opening, with hardware calibrated for the humidity that swells wood frames in older CBS homes. Storm door installation typically runs $900 to $1,900, and most of these jobs are single-visit work.
Bifold & Folding Doors
Bifold doors are gaining ground in newer Jupiter construction where homeowners want a wide opening to a patio without swinging slabs eating up floor space. We install Sliding & Patio Doors in Jupiter style multi-panel folding systems with impact-rated glass, which is not a one-size-fits-all product. Every folding door in this wind zone has to carry its own FPA number and the track system has to be rated for the design pressure. In Jupiter, a multi-panel bifold installation runs $6,000 to $12,000 depending on panel count and glazing requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jupiter
We’re an authorized installer for more than a dozen manufacturer lines, including Jupiter Cws service, Andersen, Pella, Marvin, Milgard, PGT, and CGI. We keep parts common to Jupiter jobs in local inventory: coastal-grade hinges, stainless rollers, and impact-rated glass packages. If you already have a brand preference, we’ll quote that line and at least one comparable option side by side on paper so you see exactly what you’re paying for. We register both manufacturer warranty layers in writing before the truck leaves the driveway, which matters when you’re dealing with a warranty claim five years down the road.
Common Door Installation Problems We See in Jupiter Homes
- Salt air seizes hardware. Homes within a mile of the Jupiter Inlet get sustained salt-laden onshore air that oxidizes standard aluminum hinges and rollers in three to five years. Doors that once swung freely start binding and requiring a shoulder to open. We spec stainless hardware and coastal-rated frames on every water-adjacent install.
- Impact-rated paperwork blocks the permit. A door without a valid Florida Product Approval number for Palm Beach County’s high-velocity hurricane zone gets rejected at submittal. That stalls the project before the old door is even removed. We file the FPA documentation as part of every permitted replacement.
- HOA architectural review stalls the order. In master-planned communities like Abacoa, the ARC board must approve frame color and style before a replacement permit is issued. A door ordered in the wrong color gets rejected and the project sits until a reorder arrives, sometimes with a four to six week lead time. We pull the ARC guidelines first, then order.
- Original single-pane sliders fail under wind load. Jupiter’s 1970s and 1980s CBS ranch stock often still carries original aluminum sliders that rack under hurricane-force gusts and leak water at the track. We regularly replace these with impact-rated, fusion-welded sliders that carry the full wind-zone approval.
Pricing for Door Installation in Jupiter, FL
Here’s what we see across Jupiter right now. A standard entry door replacement runs $2,200 to $4,800. Double or French doors land between $3,800 and $7,500. Storm doors run $900 to $1,900. Bifold systems start around $6,000 and climb based on panel count. Pivot doors, which show up in some newer construction near the Inlet, run $4,500 to $9,000 depending on size and hardware.
What moves the number is the glass package, the frame material, and whether the opening needs reframing once the old door comes out. Permits and inspections add a few hundred dollars in most cases. We give written line-item quotes before work starts, and the price doesn’t shift once we’ve agreed to it. Call our Door Installation in Jupiter team at (813) 320-9346 for an exact number on your specific opening.
A Jupiter-Specific Reality: Paperwork Before Installation
Every permitted door replacement in Jupiter must carry a valid Florida Product Approval number and be installed to the exact tested specifications for Palm Beach County’s 160 to 170 mph coastal design wind speed. That’s not a suggestion. That’s the code, and it’s being driven by insurers actively non-renewing policies on homes near the Jupiter Inlet that lack impact-rated openings.
What does that mean for you? It means the door itself is only half the job. The other half is the submittal packet: the FPA number, the design pressure rating, the installation details from the manufacturer’s approval document, and the notice of commencement. If any of those pieces is missing, the permit office rejects the application and nothing moves.
We replaced a corroded original aluminum sliding door in The Bluffs after the homeowner’s insurer sent a 30-day renewal notice demanding proof of impact-rated openings. Our crew pulled the FPA documentation, installed a fusion-welded frame impact-rated slider with low-E argon-filled glass, and coordinated the final inspection so the homeowner could submit the paperwork before the deadline. The door was in. The inspection passed. The insurance stayed in force.
Then there’s the HOA layer. In Abacoa and other covenant-controlled Jupiter communities, the architectural review board signs off on the door’s color and style before a replacement permit is pulled. We’ve seen ARC committees deny doors for a shade of paint that deviated from the approved palette. A rejection means a reorder and weeks of delay after the old door is already removed. We file the ARC application, we track it, and we don’t order the slab until the approval comes back in writing. That’s how you avoid staring at a boarded-up opening while a committee meets.
Coastal Corrosion and What It Means for Your Door Choice
Homes within roughly a mile of the Jupiter Inlet live in a different material world than houses in Royal Palm Beach or Wellington. Salt-laden onshore air oxidizes standard aluminum frames and seizes hardware in as little as three to five years. A door that looks fine at the threshold is often corroding from the inside around the hinge mortises and the roller assemblies.
If you’re replacing a door near the water, standard anodized aluminum is a mistake. We spec stainless steel hinges, marine-grade hardware, and fusion-welded frames on every coastal install. Andersen both make coastal-rated lines that hold up far better in this environment, and we’ll show you the side-by-side numbers on paper before you commit. The goal is a door that still swings true in ten years, not one that needs a shoulder to close by year four.
We Also Serve Cities Near Jupiter
Our crews serve Jupiter and the surrounding Palm Beach County and Martin County communities, including Palm Beach Gardens, North Palm Beach, Hobe Sound, and Port Salerno. If you’re anywhere in that corridor, call (813) 320-9346 and we’ll tell you straight whether we can schedule you this week.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Jupiter
Yes, you need it for doors too. Every replacement door in Palm Beach County’s high-velocity hurricane zone must carry a valid Florida Product Approval number, and the FPA must match the exact tested specifications for the 160 to 170 mph design wind speed. We file this documentation as part of the permit application. Call (813) 320-9346 and we’ll walk you through the paperwork checklist for your specific opening.
Submit the application at least four to six weeks before you want the door installed. Abacoa’s ARC meets on a set schedule, and a rejection for color or style deviation sends you back to the manufacturer with a reorder lead time that can add another month. We pull the HOA guidelines before we order anything, so the slab that arrives is the slab that gets approved.
Yes, if you call now. A 30-day insurance deadline is tight but workable for a standard entry or single slider replacement, provided the FPA documentation and permit submittal happen in the first week. We prioritize insurance-driven jobs and we coordinate the inspection so you can submit proof of compliance before the notice deadline. Start with a call to (813) 320-9346 and we’ll tell you honestly whether your timeline is feasible.
Standard aluminum will fail. We’ve seen frames oxidized through inside three years within a mile of the Inlet. The salt air corrodes the hinge mortises and seizes the rollers, and once the frame fails, the slab won’t seal properly even with new weatherstripping. If you’re near the water, we spec coastal-rated stainless hardware and fusion-welded frames. It costs more up front and lasts far longer.
We file it. We pull the permit, submit the FPA documentation, post the notice of commencement, schedule the inspection, and coordinate the final approval. You shouldn’t have to navigate Palm Beach County’s permitting portal on your own. That’s part of the job. Call (813) 320-9346 and we’ll handle it from the first measurement to the final sign-off.
Get a Straight Answer on Your Jupiter Door Project
If your door binds in July, leaks at the threshold, or your insurer is asking for impact-rated proof, call us. We’ll send a technician to Jupiter to measure the opening, review your paperwork situation, and put a line-item quote in your hands. The estimate is free. The advice is straight. Call (813) 320-9346.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.