Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Tampa: What to Know First
We install, replace, and repair PGT custom and geometric windows throughout Tampa, including arched units, radius tops, trapezoids, circles, hexagons, and oversized openings that need structural reinforcement. Most PGT custom-shape work in the Tampa area runs from $1,200 to $4,800 per opening depending on glass package, size, and whether the frame is being replaced or retrofitted. We are an independent PGT service provider, not a factory branch, and we quote every job in writing before the first cut is made.
This page is for homeowners who already own PGT windows or are considering them and want straight answers about how shaped units hold up in Tampa’s climate, what they cost to fix, and how to avoid voiding a warranty. If you’d rather talk than read, call (813) 320-9346 and a live person will pick up.
How PGT Products Fail - and How We Fix Them
- PGT WinGuard aluminum frame corrosion at shape intersections. Geometric windows have more mitered frame joints than rectangular units, and in Tampa’s salt air those joints are where WinGuard frames start to show white oxidation first. We remove the corner keys, clean the mating surfaces, reseal with a marine-grade urethane, and refinish the joint. Catching it before the pitting runs deep saves the frame.
- Radius glass seal failure on PGT windows manufactured before the 2018 process change. Curved glass is bent on a radius, and the flex in that bend had a tendency to weaken the hot-melt seal over years of Tampa temperature swings, especially on east and west elevations where the glass gets hammered with direct sun. We replace the insulated glass unit with a matching radius IGU from a local Tampa glass fabricator we’ve used for over a decade, not a generic flat lite crammed into the curve. If it needs to be in writing to be true, we will put it in writing.
- Hardware stress on PGT AccuTrak rollers in shaped sliders. When a homeowner wants a geometric opening that still slides, PGT uses a roller track system that wasn’t really built for the weight of a half-circle lite. We see worn AccuTrak rollers on those units years before the same hardware fails on a standard slider. The fix is a roller swap to a heavier-rated aftermarket stainless roller, not another set of the same factory parts that will fail the same way.
- Flashing sag on arched PGT units over block walls. A half-round window set into a Tampa block opening has a flat bottom flange and a curved top flange, and the curved side is the one that leaks ten years later if the original installers butted the flashing instead of lapping it. We pull the exterior trim, re-flash the radius properly, and re-bed the frame. A call for a new window turns into a flashing repair most times.
- Condensation between panes on large PGT trapezoid units. These units put the spacer bar under uneven pressure along three or four different edge lengths, and when the desiccant in that spacer saturates, the glass fogs from the inside. That’s a spent seal, not a cleaning issue. We replace the IGU and verify the frame is still square before the new unit goes in. A fogged trapezoid almost never means you need a whole new window.
Our PGT Custom & Geometric Windows Process
- 1
Call and describe the unit. A live person answers. We ask what shape the window is, whether it’s fogged, leaking, or binding, and when it was installed. We’re not triaging you through a call center.
- 2
Measure the opening and the existing frame. One of our techs comes out, measures the opening twice, checks the reveal on all sides, and photographs the existing flange, flashing, and sealant line. Geometric windows don’t tolerate sloppy measurements.
- 3
Parts decision: OEM or quality aftermarket. If the frame is in good shape and PGT still carries the part, we use OEM. If the factory part is a known weak point, as with AccuTrak rollers on shaped units, we explain the better option in plain language and quote both on paper. The choice is yours.
- 4
Fabricate the glass locally. Radius, arched, and geometric IGUs are cut and sealed by a Tampa fabricator we’ve worked with for more than a decade. No freight damage from a truck ride across three states.
- 5
Install, seal, and test. We set the unit, bed the frame, replace the exterior trim and flashing, and run a water test on the full perimeter before we load up the truck. If the pane is not true, the job is not done.
- 6
Register the warranty layers in writing. Both manufacturer warranty layers are stated with their durations on your paperwork, and registered before we leave the driveway. Our 90-Day Done Right Promise covers the workmanship. No fine print to wade through later.
What PGT Custom & Geometric Windows Costs in Tampa
Tampa pricing for PGT custom and geometric windows breaks down like this, and these are real numbers we’ve quoted on jobs in Seminole Heights, Palma Ceia, Westchase, and Carrollwood in the last two years.
| Job Type | Typical Tampa Range |
|---|---|
| Seal or IGU replacement on a radius or arched PGT unit | $800 – $1,900 |
| New trapezoid or geometric PGT WinGuard window (standard size) | $1,200 – $2,800 |
| Oversized arched or half-round PGT unit (custom glass) | $3,000 – $4,800 |
| Flashing repair or re-bed on a leaking shaped frame | $600 – $1,400 |
| Full replacement of a large custom geometric opening (frame, glass, trim) | $4,500 – $7,500+ |
What moves the price: glass package (standard laminated vs. impact-rated vs. Low-E), the radius of the curve, whether scaffolding or a lift is needed for the install, and whether the existing frame is salvageable. We quote a fixed number before we start, and the number on the bill is the number you approved. Call (813) 320-9346 for an exact quote. Estimates are free.
Why Tampa Homeowners Call TruePane Windows & Doors for PGT Work
Dale Kessler started this company in 2008 after years of seeing PGT and other manufacturer warranties get voided by out-of-true installs. We spent the last years in Tampa Bay learning how glass and frames fail here, not in a training manual written for a national market. When we do a PGT job, every tech on the truck is background-checked and uniformed, the manufacturer warranty layers are registered in writing before we leave, and the workmanship is guaranteed for 90 days through our Done Right Promise. If the work is not right, we come back. No arguing, no paperwork shuffle. And because we’re an authorized installer for more than a dozen brands, if a PGT unit is genuinely beyond saving, we can quote CGI, CWS, ES Windows, or ECO Window Systems side by side so you see exactly what you’re comparing. Call (813) 320-9346 and a live person answers. That part matters.
FAQs
No. Independent service does not void a PGT warranty, but installing non-OEM parts in a way that alters the frame or glass package can. We use OEM parts when they’re the right choice and document everything in writing on your invoice so there’s a clean paper trail if a warranty claim ever comes up. Call (813) 320-9346 if you want us to look at it before a claim.
Most radius and geometric IGU replacements take three to seven days because the glass is fabricated locally. Full frame replacements with custom shapes typically run two to four weeks depending on the glass package and whether it’s impact-rated. We’ll give you a date range when we quote, and we’ll be there when we say. Call (813) 320-9346 for a schedule estimate.
In most Tampa homes, repairing the IGU is the better move if the frame is square and the hardware works. A fogged seal on an arched unit is a glass failure, not a frame failure, and a new IGU will set you back $800 to $1,900 instead of $3,000-plus for a full replacement. We’ll tell you honestly if the frame has rot or the geometry has shifted and replacement is actually the right call. Call (813) 320-9346 for an assessment.
Yes, and that’s a big part of what we do in Tampa. We match glass tints, frame finishes, and sightlines so the new shaped unit sits like it was born in the same opening. If an exact PGT match isn’t available anymore, we explain the closest option on paper before we order anything. Call (813) 320-9346 and we’ll walk you through it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.