Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Sliding Glass & Patio Doors in Tampa: What to Know First
We repair and replace CGI sliding glass and patio doors throughout Tampa as an independent CGI service provider, with most jobs completed in a single visit and a free line-item estimate before any work begins. A typical roller replacement or track adjustment runs $180 to $340; a full door replacement with impact-rated CGI glass lands between $2,800 and $5,500 depending on size and series. If you own a CGI sliding door that is hard to move, leaking, or showing cloudy glass, call (813) 320-9346 and talk to a live person who knows this product.
This page is for Tampa homeowners who bought CGI doors for storm protection and do not want to gamble on a contractor who only sees them once. Dale Kessler and our team have been setting and sealing impact-rated doors across the Tampa Bay area for the better part of two decades, and we can tell you what is actually wrong before we touch a screwdriver.
How CGI Products Fail - and How We Fix Them
- Sentinel series rollers seize in the Tampa humidity. The original rollers on CGI Sentinel sliding doors use steel bearings that corrode faster here than inland because of salt air and our wet season. The symptom is a door that groans and skips instead of gliding. We replace them with stainless-bearing rollers and re-align the panel so the weight distributes evenly on both wheels, not just the leading edge.
- Estate series interlock channels collect sand and jam the lock. Tampa yards have sandy soil, and after a season of barefoot kids and dogs, grit works into the interlock where the two panels meet. The door will not lock without a hard shove. We pull the panels, flush the track and interlock, and realign the panel so the lock engages with two fingers of pressure. This is probably the most common CGI call we run in the South Tampa and Westchase areas.
- Weatherstripping on older CGI doors compresses unevenly and leaks at the bottom corner. CGI uses a dense wool-pile weatherstrip on some Estate and Targa models. It wears flat on the side the panel rides hardest, and the bottom corner near the latch starts letting water through in a summer downpour. We replace the pile with the same profile CGI used so the channel stays OEM-consistent, then adjust the rollers to even out travel so the new weatherstrip wears square.
- Impact glass delamination shows as silver hazing at the edges. On CGI sliding doors ten or more years old, the laminate interlayer can start separating from the glass, especially on west-facing elevations that cook in afternoon sun. The glass is not broken, but the edge looks milky or silvery. That panel cannot be re-laminated. We replace the insulated glass unit with the correct CGI-listed unit and register the work so the manufacturer warranty paper trail stays clean.
- Targa series multi-point locks fall out of sync. The Targa multi-point lock has three bolts that have to land together. If the door settles even an eighth of an inch, the top bolt binds and the handle feels mushy. We re-square the panel rather than forcing the lock, because a twist-adjust on the lock alone is a temporary patch. Squaring the panel is the fix that lasts.
Our CGI Sliding Glass & Patio Doors Process
- 1
You call (813) 320-9346 and a live person answers. No phone tree. We ask what the door is doing, what series it is if you know it, and when is convenient.
- 2
A background-checked, uniformed technician comes to your Tampa home and measures twice. We measure the opening, the panel, the reveal, and the track, and we record how it sits today before anything comes apart.
- 3
We diagnose and put parts options on paper. OEM CGI parts when warranty matters, quality aftermarket when it does not and the price should be lower. Side by side, in writing, so you decide with real numbers.
- 4
We do the work. Most CGI sliding glass and patio door repairs happen that same visit because we stock the common parts for Sentinel, Estate, and Targa in our truck.
- 5
We test with you watching. Lock, latch, glide, and seal - if the pane is not true, the job is not done. That is the founding rule, and it is not a slogan.
- 6
We register both warranty layers before the truck leaves the driveway. Per The Keystone Standard, the workmanship is guaranteed 90 days with no paperwork fights, and the parts warranty is registered in writing with the durations stated.
What CGI Sliding Glass & Patio Doors Costs in Tampa
- Roller replacement on a single panel: $180 to $290
- Track adjustment and panel re-alignment: $160 to $240
- Interlock and weatherstrip replacement on one door: $240 to $400
- Impact glass unit replacement (Sentinel or Estate): $900 to $2,200 per panel, depending on size and Low-E spec
- Full CGI door replacement with impact-rated glass: $2,800 to $5,500 installed, depending on series, width, and whether we are reusing the existing frame
- Full CGI door replacement for a multi-panel or oversized patio door: $4,000 to $8,500, depending on configuration and structural requirements
The price moves based on panel size, which CGI series you have, whether the glass is Low-E or clear, and how far out of square the frame has settled over the Tampa humidity years. We quote a fixed price before work starts, and we do not come back with a surprise line item. Call (813) 320-9346 for a free estimate on your specific door.
Why Tampa Homeowners Call TruePane Windows & Doors for CGI Work
Because we stand behind it, in writing. The 90-Day Done Right Promise covers workmanship. The Keystone Standard guarantees both manufacturer warranty layers are registered before we leave. And because we know CGI well enough to fix it honestly, not just paste a new track over a problem. If a CGI replacement is not the right call, we also quote PGT, CWS, ES Windows, and ECO Window Systems side by side on paper so you see exactly what you are buying. We have served Tampa since 2008 through Dale Kessler’s family trade heritage, and we hire local, train apprentices into journeymen, and plan to still be answering the phone when your new door needs its next tune-up. If it needs to be in writing to be true, we will put it in writing.
FAQs
No, TruePane Windows & Doors is an independent CGI service provider. That matters because we recommend the right fix for your door without a manufacturer agenda behind it. We use OEM CGI parts where the warranty depends on it and tell you plainly when a quality aftermarket part is a better value.
That depends on what is wrong and what parts it needs. Some CGI warranty language requires OEM parts and documented installation for labor coverage to survive a repair. We handle this daily and will tell you in writing what your particular repair means for your warranty before we touch anything. Call (813) 320-9346 and we will walk through it.
Repair is worth it when the frame is square, the glass is clear, and the problem is mechanical: rollers, tracks, weatherstrip, or the lock. Replacement is the right call when the frame has settled badly, the glass shows edge delamination, or the panel has been blown inward from a storm. We will quote both and show you the math, not push the expensive option.
Most CGI sliding glass and patio door repairs are done the same visit, because we stock the common Sentinel, Estate, and Targa parts in our Tampa trucks. Full replacement jobs depend on the panel spec and lead time from the supply house, which we will lay out before you commit.
Hard sliding almost always means worn rollers, sand in the track, or a panel that has settled out of square. We will tell you which one it is on the estimate, not after we start. Call (813) 320-9346 and schedule the free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.