Mr-Glass Roof Replacement & Installation Nationwide | TruePane Windows & Doors

Mr-Glass Roof Replacement & Installation in Tampa: What to Know First

TruePane Windows & Doors provides independent Mr-Glass roof replacement and installation across Tampa, and most full replacement jobs take one to two days once the materials are on site. We don’t bid to be the cheapest; we bid to do the job once, with both warranty layers registered in writing before the truck leaves your driveway. Call (813) 320-9346 for a straight quote.

Call (813) 320-9346

This page is for Tampa homeowners with a failing or aging Mr-Glass roof system. Whether it’s a skylight with a failed seal, a sunroom roof that leaks at the flashing, or a full glass roof that’s lost its structural integrity after a storm season, you’ll find straight answers here on failure patterns, real costs, and how we work. Dale Kessler grew up in Seminole Heights and still lives about six blocks from where he learned to ride a bike. He’s been setting glass in Tampa for the better part of two decades, and Mr-Glass roofs are work we know well.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass roof systems in Tampa tend to fail in predictable ways. Here are the five failure patterns we see most often, and exactly what we do about each one.

• Mr-Glass Series 500 structural seal delamination. The Series 500 line uses a two-part structural silicone to bond the glass unit to the aluminum frame. Under Tampa’s UV load and summer heat, that silicone breaks down faster than the manufacturer’s national average suggests. We see delamination starting at the corners, usually by year eight in southwestern exposures. The fix is full removal and re-seal with a marine-grade structural adhesive rated for the humidity swings we get between February and August. Patching doesn’t hold.
• Mr-Glass Series 700 weep channel blockage. The 700, which shows up in a lot of Tampa sunroom additions from the early 2000s, relies on internal weep channels to drain condensation. Those channels are narrow, and once pollen, oak pollen in particular, hardens inside them, water backs up into the frame. You’ll see water staining the interior mullions even on dry days. We clear the channels and re-profile the weep slots with a small router when they’ve corroded too narrow, then test with a measured water column before calling it done.
• Mr-Glass skylight gasket compression set. The neoprene gaskets on Mr-Glass skylights compress over time and lose their rebound. This is not a manufacturing defect; it’s what happens to every elastomer after a decade of Tampa heat. You’ll notice it first as a draft, then a drip. We replace with an EPDM gasket that holds its compression rating longer in this climate, and we bed the new gasket in butyl tape rather than relying on friction fit alone.
• Mr-Glass multi-wall polycarbonate clouding. Some Mr-Glass sunroom roofs use multi-wall polycarbonate panels instead of glass. After seven to ten years, the cells start to cloud from micro-cracking caused by thermal cycling. The panel turns milky and light transmission drops off sharply. There is no chemical restoration for this. We replace with a UV-stabilized panel matched to the original profile, and we double-seal the open cell ends with breathable tape so the new panel doesn’t collect condensation inside the flutes.
• Mr-Glass flashing failures at roof transitions. More Mr-Glass roofs leak at the point where they meet the house than anywhere else, because the original installers often used a single layer of peel-and-stick and called it a day. Tampa’s hurricane-season wind loads flex that transition, and the membrane tears. We strip the old flashing back to the sheathing, sister any rotted framing, and install a two-layer transition with a stainless drip edge, sealed top and bottom. If it needs to be in writing to be true, we will put it in writing.

Our Mr-Glass Roof Replacement & Installation Process

Every Mr-Glass job follows the same pattern, and none of it is a mystery to the homeowner while it happens.

1. 1
   Call and speak to a person. You call (813) 320-9346, a live person answers, and you tell us what you’re seeing. We schedule a site visit at a time that works for you.
2. 2
   Diagnostics and measurement. A background-checked, uniformed technician measures every opening twice and inspects the failure. We document what failed and why, in a way you can read.
3. 3
   Parts decision, in writing. We price OEM Mr-Glass parts and quality aftermarket equivalents side by side on paper, with availability and lead times. You make the call with the numbers in front of you. No upstream decisions made after you’ve signed.
4. 4
   Removal and installation. We remove the old unit or panel, address any substrate damage at the transition points, set the new glass or polycarbonate, and begin the sealing and flashing work. Most replacements take one to two days.
5. 5
   Water column test and visual inspection. We test the assembly with a measured water column and walk the full perimeter before we call it done. If the pane is not true, the job is not done.
6. 6
   Warranty registration and cleanup. Before the truck leaves, both warranty layers are registered on paper, durations stated, and the site is left the way a tradesperson would leave their own mother’s driveway. Then we hand you the paperwork.

What Mr-Glass Roof Replacement & Installation Costs in Tampa

Straight numbers, because you’ve been quoted vague ranges before.

• Single Mr-Glass skylight replacement, standard size (2×4 or 4×4): $900 to $1,700 installed, depending on the glazing type and whether the curb is reusable.
• Mr-Glass Series 500 structural re-seal (per opening): $450 to $900, which includes removing the old silicone, cleaning the bonding surfaces, and applying the marine-grade structural adhesive.
• Multi-wall polycarbonate panel replacement in a sunroom roof: $40 to $65 per square foot, installed, including the breathable end-seal tape and edge trim.
• Flashing and transition repair at the house line: $800 to $2,200, depending on how much framing needs to be sistered and how far the rot runs.
• Full Mr-Glass glass roof replacement on a standard sunroom: $8,000 to $22,000, driven mostly by glazing type, frame condition, and access. A simple single-slope roof costs less; a multi-slope with interior mullions costs more.

What moves the price: the glazing type, whether the original frame can be salvaged, the condition of the roof deck at the transition, and the lead time on OEM parts versus aftermarket. We never surprise you with a line item on the final bill that wasn’t on the written estimate. Call (813) 320-9346 for a no-hassle quote, free of charge.

Why Tampa Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We are an independent Mr-Glass service provider, not a manufacturer-authorized dealer. That means we answer to you, not to a brand’s sales quota. We’ve been serving Tampa communities since 2008 through Dale Kessler’s family trade roots, and the 90-Day Done Right Promise is simple: if it is not done right, we make it right, with no paperwork fights and no arguing. The Keystone Standard means both manufacturer warranty layers are registered in writing before we leave the driveway, with durations stated, not implied.

Tampa homeowners also bring us their PGT, CGI, CWS, and ES Windows roofs and windows, and that matters for Mr-Glass owners. It means we don’t have one hammer. When a Mr-Glass part is unavailable or the better engineering call is a different manufacturer’s line, we tell you so plainly and give you side-by-side quotes on paper. That’s a square deal, and it’s the only kind we do.

FAQs