French & Double Doors

French & Double Doors in Tampa, FL | TruePane Windows & Doors

French and double doors give a Tampa home something a single door can’t: wide, symmetrical openings that connect interior rooms to patios, lanais, and pool decks without sacrificing hurricane protection. We’re TruePane Windows & Doors, and we’ve supplied and installed impact-rated French door systems throughout Tampa for years, from Hyde Park bungalows to waterfront homes on Davis Islands and new builds in Westchase. Every system we install carries laminated impact glass in each lite and multi-point locking hardware, so you get the light and the view with the structural performance Florida Building Code demands. Call (813) 320-9346 to talk about your opening.

Call (813) 320-9346

Product Overview - French & Double Doors

French doors in Florida carry a split personality, and that’s the point. They read as graceful, traditional, almost delicate. But the systems we install in Tampa are engineered for high-velocity hurricane zones, with every component from the frame extrusion to the glass pack built to stay intact when debris hits. The paired design means symmetrical sightlines: two door panels that meet at the center, each with laminated impact glass in every lite. When closed, the doors present a clean grid of glass and frame. When open, they swing wide for airflow and access.

What separates an impact-rated French door from a decorative one is what you don’t see. The laminated glass sandwiches a PVB interlayer that holds the pane in the frame under impact, even when the glass cracks. The frame is reinforced, with multi-point locking hardware that secures the active and passive panels at the top, bottom, and center. Hinges are heavier. Thresholds are engineered to shed water. The result is a door pair that looks residential and performs like a building component. That’s why Tampa homeowners choose this profile for rear elevations, courtyard entries, and second-floor balconies where wind exposure is real and the view matters.

Technical Specifications

• Frame materials: Aluminum or vinyl, selected by exposure and architectural style. Aluminum suits modern and mid-century elevations; vinyl offers thermal breaks for conditioned spaces.
• Maximum width: Up to 96 inches for a paired configuration.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Impact lamination is standard; Low-E and tint are performance upgrades.
• Finish options: White, Almond, Bronze, Black, and Tan. Finishes available on aluminum; vinyl frames are typically offered in White and Almond.
• Hardware: Multi-point locking system standard on all TruePane French door configurations.
• Design pressure: Matched to the wind zone of your Tampa property, up to +/-100. We never overstate this number; the spec that matters is the one on your quote.

Hurricane & Compliance Performance

Laminated Impact Glass
Every lite in our French and double doors carries a PVB interlayer between glass panes. Under impact, the glass may crack but it holds in the frame rather than shattering into the room. That’s the core mechanism behind Florida impact protection, and it’s standard on this product, not an upgrade.

Miami-Dade NOA / Florida Product Approval
The system carries Miami-Dade Notice of Acceptance and Florida Product Approval numbers, issued per configuration. When we quote your Tampa project, we specify the exact approval numbers applicable to the frame, glass, and hardware you select so your permit package is complete.

FBC / HVHZ Compliance
This product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the standard Hillsborough County enforces for most of Tampa’s wind-borne debris region, and we supply documentation to match. It’s not a generic coastal rating; it’s the code your jurisdiction actually reviews.

TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. Each test simulates a different failure mode: debris strike, repeated pressure cycling, and physical intrusion. Passing the series is how a door proves it isn’t just strong on paper.

Design Pressure Matched to Your Wind Zone
Design pressure is not a marketing number. It’s calculated from the wind zone your specific Tampa address sits in, plus the height and exposure of the opening. We match the door to that calculation, up to +/-100, and we won’t sell you more rating than your structure requires. Over-specifying wastes money; under-specifying fails inspection.

Energy Performance Options
Low-E insulated glass is available for homeowners prioritizing AC load reduction and UV control in west-facing Tampa rooms. Tinted glass reduces glare and heat gain on pool-facing elevations. These are optional stack-ups layered on top of the standard laminated impact glass.

Color & Glass Options

The finish you pick depends heavily on your home’s architecture. White and Almond dominate Tampa’s Mediterranean revival and ranch stock; they reflect heat, read clean against stucco, and stay cooler to the touch in July. Bronze and Black suit modern elevations and darker window packages, and they frame a view dramatically, which works well on waterside homes in Beach Park or Culbreath Isles where the door faces open sky or water. Tan splits the difference for coastal palettes that want warmth without the starkness of white.

Glass selection follows function. Standard clear laminated impact glass preserves the truest view and works everywhere. Low-E insulated glass is worth the upgrade when the opening faces direct afternoon sun or sits on an air-conditioned room you use daily. Tinted glass suits pool-facing lanais and western exposures where glare and heat buildup are constant. Tell us how the room is used and which way the opening faces; we’ll recommend the stack-up that fits, and you’ll see the exact configuration on your written quote.

Installation by TruePane Windows & Doors in Tampa

A Miami-Dade NOA-rated door installed incorrectly is just an expensive hole in the wall. The approval rating assumes the product is installed per the manufacturer’s tested assembly, and that’s where our work in Tampa matters. We install French and double doors following AAMA 2400/2410 practice, which governs installation methods for fenestration in exterior walls. The opening gets inspected before the old door comes out, checking for rot, settling, and out-of-square framing that would compromise the new system.

Every TruePane installation sets the frame level, plumb, and square before anchoring. We use AAMA 812 low-expansion foam perimeter sealant to air-seal the rough opening, then flash and integrate the system into the wall’s water management plane. Coastal Tampa homes in flood-adjacent or elevated construction get particular attention to sill flashing, because wind-driven rain finds every gap. After the door is set and hardware adjusted, we run a water test on the threshold and perimeter, walk the door through its full swing and lock sequence, and clean the job site. Permitting awareness matters here too. Hillsborough County and the City of Tampa require HVHZ product approvals as part of the permit record, and we supply the NOA and FL Product Approval documentation your specific configuration carries so the submittal is complete. If you’re replacing exterior openings, the permitting conversation happens before we order the door.

Frequently Asked Questions - French & Double Doors

Get a Quote - French & Double Doors in Tampa

If you’re replacing an old sliding door, tired French doors, or planning a new build opening in Tampa, we’d like to measure it and quote it properly. We sell and install these systems, which means one company is accountable for the product and the workmanship. Call (813) 320-9346 to start your project or schedule a free on-site measurement.

Written by the team at TruePane Windows & Doors, serving Tampa, FL with impact-rated window and door installations.