Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Ocean Ridge
Door installation in Ocean Ridge has to solve a problem most coastal towns never face: salt attacking from two sides at once. The Atlantic sits a few hundred feet east of A1A, and the Intracoastal Waterway runs along the west, so marine air settles on your door hardware whether the wind blows or not. We’ve been installing entry doors, French doors, and pivot doors in this exact environment long enough to know which materials fail early and which ones hold. If you need a door replaced or upgraded on a barrier island where standard aluminum frames chalk out in three to four years, call TruePane Windows & Doors at (813) 320-9346. A live person answers, and the estimate is free.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Door Installation Company
TruePane was built by Dale Kessler, a second-generation glazier who started the company in 2008 after watching too many out-of-true installs void warranties and leave homeowners fighting paperwork. We are not a franchise. We employ uniformed, background-checked technicians who measure every opening twice and register both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it applies to every door we set in Ocean Ridge.
Ocean Ridge’s housing stock is almost entirely custom and semi-custom single-family homes built between the 1950s and 1980s. These are not tract-house openings. Door sizes vary, framing hides surprises, and the original aluminum units are decades past their service life. Our crews know Harbor Drive, Inlet Cay, Sabal Lake, and the islands around Boynton Inlet well enough to anticipate the wind-load and corrosion issues before the first screw comes out. That local knowledge is why Ocean Ridge homeowners keep our number.
The 90-Day Done Right Promise sits behind everything. If the door is not right, we make it right, no arguing, no fine print. And both manufacturer warranty layers get registered in writing, with durations stated, while the truck is still in your driveway.
Our Door Installation Services in Ocean Ridge
Every home on this barrier island lives under Florida Building Code wind-load demands that exceed what inland Palm Beach County requires. So the door we specify for Ocean Ridge is not the same door we would hang in Acacia Villas. Here are the ones we install most often.
Entry & Swing Doors
An entry door in Ocean Ridge has to do two things at once: meet impact-rating requirements and survive salt air that eats aluminum from the bottom rail up. We specify insulated impact-rated fiberglass or hardwood doors with stainless hinging hardware, and we flash the rough opening with butyl tape before the jamb goes in. For homeowners along the older streets near Ocean Avenue, where the 1960s and 1970s homes still have their original single-pane entry systems, a new swing door changes security, noise, and the electric bill in one job.
Double & French Doors
French doors on the waterway side of Ocean Ridge fail differently than the ones facing the Atlantic. Stagnant air over the Intracoastal lets salt particles settle and linger, so hinges pit and thresholds crack even when the ocean-facing doors look fine. We hang double doors with 316 marine-grade stainless hinges on the west face, and we swap the standard threshold for a hot-dip galvanized unit with sealed fasteners. Marvin and Andersen both make impact-rated French door systems we trust in this application.
Bifold & Folding Doors
When a homeowner wants the back wall of the living room to open onto a pool deck or Intracoastal view, bifold doors carry a lot of panel weight on tracks and rollers that are exposed to salt-laden air. We install multi-point locking systems, stainless track hardware, and we level the track to the thickness of a quarter. A folding door that binds in July is a door that was never set true, and we do not leave that behind.
Pivot Doors
Pivot doors are common on newer Ocean Ridge builds and large-scale remodels where the entry has to make a statement but still pass impact testing. The pivot hinge carries hundreds of pounds, so the door slab itself has to be engineered for the load, not just chosen for the look. We quote Andersen, Pella, and Marvin pivot systems side by side on paper, and we make sure the hidden hinges, the closer, and the weatherstripping are all specified for barrier island conditions. A pivot door with the wrong closer on a humid day is a door that slams or drifts, and that is not acceptable.
See the full scope of our Door Installation work for details on custom openings, oversized units, and retrofit framing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Ocean Ridge homes we lean on the ones that hold up under coastal abuse: Marvin, Andersen, Pella, PGT, and CGI. We do not push one brand. We quote two or three side by side on paper, with model numbers, warranty lengths, and lead times spelled out. That way you see exactly what you are buying. Since our technicians service Ocean Ridge regularly, we keep common hardware, weatherstripping, and sealants stocked for faster turnaround on repairs and replacements. And we register both warranty layers in writing before the truck leaves.
Common Door Installation Problems We See in Ocean Ridge Homes
- Intracoastal-side hinge pitting. On the west face of barrier island homes, salt particles settle out of still air and sit on hinge pins and plates. Standard stainless hinges pit within five to seven years. We specify 316 marine-grade stainless on every waterway-facing door, even when the same door on the Atlantic side would pass with standard hardware.
- Chalky aluminum frame oxidation. Standard aluminum door frames in Ocean Ridge develop white chalky oxidation and pinhole leaks along the bottom rail within three to four years. The fix is a properly flashed impact-rated frame with a marine-grade finish and sealed end caps, not another coat of paint.
- Threshold corrosion and wind-driven rain intrusion. Door thresholds with exposed fasteners corrode and crack, which lets driving rain and salt spray under the door slab. We install hot-dip galvanized thresholds with concealed fasteners and a continuous sill pan, sealed with marine-grade caulk.
- Sagging doors from failed seals and pitted hardware. On Harbor Drive we replaced a 1980s aluminum French door on the Intracoastal side with hinges so badly pitted the door sagged and would not latch. The homeowner had already replaced the ocean-side door twice, but the waterway side failed first. We set a Marvin impact-rated fiberglass door with 316 stainless hinges and a hot-dip galvanized threshold, flashed the rough opening with butyl tape, and sealed the jamb with marine-grade caulk.
Pricing for Door Installation in Ocean Ridge, FL
Door installation pricing in Ocean Ridge runs higher than inland Palm Beach County, and the gap is real. A standard entry door replacement with impact-rated fiberglass and marine-grade hardware typically lands between $3,800 and $7,500. A double French door system on an Intracoastal-facing wall, with 316 stainless hinges, hot-dip galvanized threshold, and full flashing, runs $9,000 to $18,000 depending on the manufacturer line, the glass package, and the condition of the rough opening.
We Also Serve Cities Near Ocean Ridge
TruePane handles Door Installation in Ocean Ridge and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are a short drive from the barrier island and want the same marine-grade hardware specs, the same warranty registration, and the same crew, call us.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Ocean Ridge
The Intracoastal side of Ocean Ridge corrodes faster because the air over the waterway is calmer. Salt particles settle out of stagnant air and sit on hinge pins, plates, and screws day after day. On the Atlantic side, the constant breeze tends to blow salt through and away. Waterway-facing doors need 316 marine-grade stainless hardware. Standard stainless pits within five to seven years directly facing the Intracoastal. Call (813) 320-9346 and we will inspect your hinges and quote the right hardware.
Yes. Ocean Ridge is a barrier island, which means there is no meaningful inland buffering from Atlantic hurricane tracks anywhere in town. Florida Building Code requires impact-rated or protected openings on both sides of the island, including homes on the Intracoastal and along A1A. It is not a preference, it is a permit requirement. We handle the impact paperwork and load the door to code.
The most expensive mistake is specifying inland-grade hardware and flashing on a barrier island home to save a few hundred dollars on the bid. Six or seven years later the hinges are pitted, the threshold is cracked, and the jamb is leaking. The replacement costs more than the upgrade would have. We quote the coastal spec up front and write it into the line items so there is no ambiguity.
Fog between the panes means the seal on the insulated glass unit has failed, and Ocean Ridge’s humidity and salt exposure accelerate seal degradation faster than inland climates. The glass unit needs replacement in most cases. It is a common repair we handle on older French and patio doors throughout Ocean Ridge. Call (813) 320-9346 for an assessment and an exact quote. Estimates are free.
Code allows non-impact doors in some existing homes if the opening is protected by an approved shutter or panel system that meets current wind-load requirements. But shutters only help when someone is home to deploy them, and they do nothing for the other 50 weeks of the year when salt air and humidity are working on the frame, hinges, and seals. We recommend impact-rated doors for barrier island homes. We will walk you through the code requirements and the cost difference for your specific opening.
Get Your Free Ocean Ridge Door Installation Estimate
The doors on an Ocean Ridge house are working against salt from two directions and wind from all of them. The spec matters. The flashing matters. The hardware grade matters. Call TruePane Windows & Doors at (813) 320-9346 to schedule your free estimate. A live person answers 24 hours a day, seven days a week. We will measure twice, quote the right door for your exposure, and register both warranty layers in writing before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge with marine-grade door installations and the Keystone Standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.