Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Redington Shores
Door installation in Redington Shores has to account for something most contractors from the mainland don’t fully appreciate: salt is coming at your house from two directions at once. The Gulf of Mexico sits to the west, Boca Ciega Bay and the Intracoastal to the east, and there is no sheltered side on this barrier island. That double-front salt exposure is why we stock marine-grade hardware on our trucks when we roll into Redington Shores, and why every quote we write for this town starts with the Florida Building Code wind-load requirements your specific block-wall opening has to meet. Call TruePane Windows & Doors at (813) 320-9346 and we’ll walk you through what your door actually needs to pass inspection, hold up to a Category 4, and keep draining properly for the next twenty years.
Here’s the honest version of what you’ll spend on Door Installation in Redington Shores: an entry door replacement on a standard 36-by-80 opening typically runs $1,600 to $4,200 installed, depending on impact rating and frame material. A marine-grade double French door opening onto a Gulf-facing patio lands between $4,800 and $11,000 when you include the continuous sill pan, stainless hardware, and CBS anchoring the code requires. We price in writing, before work starts, and the number we hand you is the number you pay.
Why TruePane Windows & Doors Is Redington Shores’s Preferred Door Installation Company
We’ve spent years in this trade, and Dale Kessler founded TruePane in 2008 on a rule that has never left the whiteboard: if the pane is not true, the job is not done. That applies to doors the same way it applies to glass. A door that binds in July heat, a French door that leaks at the center astragal, a storm door with hinges that squeal from salt pitting within eighteen months: that work was never true, and we won’t walk away from it. Redington Shores homeowners call us because we register both manufacturer warranty layers in writing before the truck leaves the driveway, and we back the workmanship with our 90-Day Done Right Promise. No paperwork fights. No arguing. If it’s not right, we make it right.
We also answer the phone. A live person picks up, 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. If you have water coming through a door during a squall at 10 p.m., you’ll speak to someone who can dispatch a crew to Redington Shores. That matters on a barrier island where the next storm is never far off.
Our technicians are background-checked and uniformed, and they work in your home the way they would work in their own mother’s. We measure every opening twice. We quote manufacturer lines side by side on paper, so you can see the difference between a PGT WinGuard and a CGI Impact Series slab before you spend a dollar. And we don’t leave a job until the inspector has signed off and the door swings square in the frame.
Our Door Installation Services in Redington Shores
Entry & Swing Doors
An entry door in Redington Shores is doing more than welcoming guests: it’s your first line of defense against wind-driven rain and salt. We set entry doors into CBS block with full-perimeter anchoring that meets the wind-borne debris requirements of the Florida Building Code. Standard entry replacements in Redington Shores run $1,600 to $4,200 installed. If your existing jamb is rusted out at the threshold seam, we’ll tell you before we quote, not after the old door comes off.
Double & French Doors
Double French doors are the most common failure point we see on elevated new builds and renovated beach cottages in Redington Shores. The leak at the center astragal is almost always a missing or improperly sloped continuous sill pan under the fixed panel. We build those pans right, slope them toward the drainage plane, and anchor both jambs through the block, not just to the original frame. Double French door installations in Redington Shores typically run $4,800 to $11,000, depending on the impact rating and whether we’re cutting a new opening or working in an existing one.
Bifold & Folding Doors
Folding door systems expand a living space toward the Gulf breeze, but in Redington Shores they expand your exposure to wind-load pressure and salt too. We install bifold and folding door assemblies with stainless steel rollers, marine-grade track hardware, and continuous sill support across the full span. If you’re pricing a folding door wall on a Gulf-front lot, expect to pay $8,000 to $18,000 for a properly engineered, code-compliant system. A cheap track will bind within two years out here; we don’t install cheap track.
Pivot Doors
Pivot doors on Gulf-front lots in Redington Shores fail wind-load inspection when the top pivot hasn’t been engineered for the door’s height and weight under 150-mph design pressures. We spec the pivot hardware from the manufacturer’s engineering table, not a catalog guess, and we anchor into structural steel or reinforced block where the local inspector requires it. Pivot door installations typically run $5,500 to $14,000 in Redington Shores, with the hardware alone often exceeding $1,500 on oversized slabs.
Storm Doors
Given Redington Shores sits in a wind-borne debris region, a storm door here is not decorative. It’s a second protective layer, and it has to be impact-rated and anchored to withstand the same design pressures as the primary door behind it. We install storm doors with stainless hinges, full-perimeter weatherstripping, and impact glazing that meets current Florida Building Code. Most storm door installations in Redington Shores run $900 to $2,800, depending on size and rating.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redington Shores
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, Simonton, and Ply Gem. For Redington Shores specifically, we rely heavily on PGT WinGuard and CGI Impact Series because their marine-grade aluminum frames and stainless hardware stand up to the double-front salt exposure this island throws at every opening. We hold local inventory on common parts for these lines, so a hinge replacement or sill repair doesn’t mean waiting two weeks on a factory order. You’ll see the actual manufacturer spec sheets side by side when we quote your job.
Common Door Installation Problems We See in Redington Shores Homes
- Threshold-seam corrosion from Boca Ciega Bay salt. The bottom rail sags, the sash binds, and within two to three years the door won’t latch without a shoulder push. If non-marine hardware was used originally, the fix is almost always a full frame replacement, not a hinge swap.
- Impact slabs anchored only to the original jamb. We see this on older CBS cottages where the 1950s jalousie frame was reused as the anchor point. Storm-driven pressure can blow the entire assembly out of the block wall. Code requires anchoring through the jamb into the masonry itself.
- French door center leaks on elevated new builds. The fixed panel sits flat on the substrate with no continuous sill pan, so wind-driven rain funnels straight into the living space. This is one of the most common warranty complaints we inherit from other installers in Redington Shores.
- Undersized rough openings flagged by Pinellas County inspectors. Original openings in 1950s through 1970s CBS structures were cast for jalousie frames and are often too narrow or out of square for a modern impact door. We grind the block edges square and use custom-width frame extrusions before flashing tape goes on.
Pricing for Door Installation in Redington Shores, FL
Here are the numbers we’re quoting in Redington Shores right now:
| Door Type | Typical Installed Cost |
|---|---|
| Standard entry door (non-impact) | $1,600 to $2,900 |
| Impact-rated entry door (PGT or CGI) | $2,800 to $4,200 |
| Storm door (impact-rated) | $900 to $2,800 |
| Double French door (standard) | $4,800 to $7,500 |
| Double French door (impact, marine-grade) | $7,000 to $11,000 |
| Bifold / folding door wall | $8,000 to $18,000 |
| Pivot door (custom slab, engineered hardware) | $5,500 to $14,000 |
What moves the number: whether the opening is original CBS block or a new rough opening, the design wind-load rating required for your elevation, the slab size, and the hardware spec. A quote that doesn’t account for your block-wall rough opening will fail inspection or leak before the next hurricane season. We don’t write those quotes. Call (813) 320-9346 for a line-item estimate for your specific door, your specific opening, and your specific elevation. Estimates are free.
We Also Serve Cities Near Redington Shores
Our crews regularly run up and down the Pinellas barrier islands and into the surrounding communities. In addition to Door Installation in Redington Shores, we serve Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re a few minutes inland and wondering whether the same wind-load rules apply, call us. They’re different, and we’ll explain the difference in plain English.
Serving Redington Shores, FL - Our Local Coverage Area
We’re based in the Redington Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Redington Shores
Any new impact-rated door in Redington Shores must meet the Florida Building Code’s wind-borne debris requirements for the specific elevation and wind speed zone of your property. On the Gulf-front side of the island, that typically means a design pressure rating of DP 50 or higher and impact-rated glazing tested to large-missile standards; on the bay side, the same large-missile impact rating applies. We’ll pull your property’s exact design wind speed from the Pinellas County wind-load maps before we write your quote, and we’ll register both manufacturer warranty layers in writing so your documentation is complete for the insurance carrier and the inspector. Call (813) 320-9346 and we’ll pull that map for your address at no charge.
Because the opening wasn’t built for a modern impact door. Most original rough openings in 1950s and 1960s CBS cottages in Redington Shores were cast for jalousie frames, which means they’re undersized and often out of square by a quarter-inch or more. A modern impact-rated frame needs a square, properly sized opening to anchor through into the masonry. We grind the block edges square and use custom-width frame extrusions, which is what the inspector is looking for: full structural anchoring, not shims wobbling in a rotted jamb. Call (813) 320-9346 and we’ll measure your opening before you spend money on a door that won’t fit.
A documented, code-compliant impact door installation typically qualifies for wind mitigation credits on your Florida windstorm policy; the actual premium reduction depends on your carrier and your existing mitigation features. What counts is the documentation: the inspector’s sign-off, the manufacturer’s notice of acceptance (NOA) for the specific door model, and the installation affidavit showing anchoring method and design pressure rating. We provide all of that in your completion package, with both warranty layers registered in writing. If your current door was installed without that trail, you’re likely leaving premium dollars on the table every renewal. Call (813) 320-9346 and we’ll tell you exactly what to look for in your current paperwork.
If the hinges are corroded to the point where the door binds or sags, the frame is almost certainly corroded too. On Redington Shores, salt-laden wind off Boca Ciega Bay and the Gulf attacks the threshold seam and the bottom rail first; by the time you hear the hinges complain, the frame and the roll channel are typically pitted and the weatherstripping has lost its seal. Replacing hinges on a rotted frame buys you maybe a year and costs several hundred dollars. A full frame replacement with marine-grade hardware is the repair that lasts. Call (813) 320-9346 and we’ll tell you which camp your door falls into, straight.
Impact rating tests the glass and the anchoring; it does not guarantee water drainage at the center seam. The leak at the astragal is almost always a missing or improperly sloped continuous sill pan under the fixed panel. On elevated new builds in Redington Shores, wind-driven rain hits that center seam at 50 mph or better, and without a continuous pan that water has nowhere to go but into the living space. The fix is removing the fixed panel, installing a properly sloped pan, and reflashing the opening. We do that work on doors we installed and on doors other companies installed. Call (813) 320-9346 and we’ll inspect the door and tell you what it needs before the next storm season.
On a 1960s CBS cottage off 174th Avenue, we installed a PGT WinGuard impact-rated hinged patio door into an original rough opening that Pinellas County inspectors had flagged as undersized for the new jamb. Our crew had to grind the block edges square and use custom-width frame extrusions before flashing tape could go on, and the final product took a Category 4 wind-load test without a single point of water intrusion. That’s the standard every Redington Shores door goes out at.
If you’re pricing a door installation in Redington Shores, get a quote that accounts for your block-wall rough opening, your wind-load zone, and the marine-grade hardware this island demands. Call TruePane Windows & Doors at (813) 320-9346 to schedule your free estimate. We’ll be there when we say, we’ll hand you the numbers in writing, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Redington Shores with door installation and repair backed by the Keystone Standard and the 90-Day Done Right Promise.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.