Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Sea Ranch Lakes
Door installation in Sea Ranch Lakes costs between $1,800 and $14,000 depending on the door type, material, and whether the opening needs reframing for today’s wind-load requirements. Most entry door replacements in the village run $2,400 to $6,500 installed, including the village permit route that every Sea Ranch Lakes job must clear before work begins. Call (813) 320-9346 for a written line-item quote, free at your kitchen table.
We know this village the way a local should. Sea Ranch Lakes is not a typical Broward stop for a door crew. The permit process routes through the village’s own administrative office, the salt air off the Intracoastal eats hardware faster than any inland site, and the homes here are older custom builds that deserve more than a stock slab dropped into a rotting jamb. Our crews work these streets regularly and we plan each install around those three realities, not in spite of them.
If the pane is not true, the job is not done. That goes for doors too. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway.
Call (813) 320-9346 and you will get a live person, not a voicemail tree. Every time. Day or night.
Why TruePane Windows & Doors Is Sea Ranch Lakes’s Preferred Door Installation Company
We have been pulling permits through the village office here long enough to know the staff by first name, and we route every door replacement through that process before opening a single wall. That matters because Sea Ranch Lakes inspectors know every property personally. A contractor who skips the village step and pulls only a county permit gets a stop-work order, sometimes the same day. We do not let that happen on our jobs.
Our background-checked, uniformed technicians arrive when we say they will. They lay down drop cloths, keep the work area clean, and treat your home the way they would treat their own mother’s. We train apprentices into journeymen and we hire local, because a company that plans to be in Sea Ranch Lakes in thirty years acts like it.
Dale Kessler founded TruePane in 2008 on a simple rule that still governs every install: if the pane is not true, the job is not done. Years of community-rooted service stands behind that rule, and our 90-Day Done Right Promise puts it in writing. If the door is not right, we make it right. No arguing, no fine print that covers neither.
Our Door Installation Services in Sea Ranch Lakes
Entry & Swing Doors
Entry doors in Sea Ranch Lakes take a beating that inland doors never see. Salt-laden wind off the Intracoastal works on hinges, threshold screws, and weatherstripping within a year or two. We install fiberglass and steel entry systems with stainless steel hinges and coastal-rated flashing, and we replace the entire rough opening when the jamb has started to rot or sag. A standard entry door replacement in the village typically runs $2,400 to $5,800, including the village permit route.

Double & French Doors
Double and French door systems in this village need factory-mullioned, impact-rated units that carry the Miami-Dade NOA product approval, not a pair of single doors bolted together in the field. The wind-driven rain here finds every seam. We specify true mulled units with reinforced astragals and stainless hardware at every hinge point. Expect to budget $6,000 to $14,000 for a proper double or French door replacement in Sea Ranch Lakes, including any reframing the older custom homes here typically require.

Bifold & Folding Doors
Folding door systems on the Intracoastal need the same impact-rated glass and NOA-approved frames as every other opening in Sea Ranch Lakes. The panels also need marine-grade roller hardware, because the stock components fail inside a few seasons of salt exposure. We install bifold and folding systems with the right coastal hardware from day one, and we register both warranty layers in writing before the truck leaves the driveway.

Pivot Doors
Pivot doors are heavier and harder to hang than standard swing doors, and when they are wrong they sag visibly within months. In Sea Ranch Lakes, we see contractors hang a pivot door on a standard frame and watch the bottom edge drag across the threshold by the second summer. We build pivot openings to carry the weight, use stainless pivot hinges rated for the load, and set the reveal square so the door swings clean and closes tight against the weatherstripping. A pivot door installation here typically ranges $5,000 to $11,000 depending on the door width and whether the rough opening needs structural reinforcement.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sea Ranch Lakes
We are an authorized installer for more than a dozen manufacturer lines, and for Sea Ranch Lakes homes we commonly quote Andersen, Pella, and Marvin side by side on paper so you can see exactly what you are buying. We keep common hardware sets on the truck for these lines, and for the older custom doors in the village we source replacement components from suppliers who carry coastal-rated parts. When we service a door in Sea Ranch Lakes, we bring what the salt air requires: stainless hinges, marine-grade handle sets, and flashing tape rated for continuous coastal exposure.
Common Door Installation Problems We See in Sea Ranch Lakes Homes
- Oxidized aluminum frames from the 1950s to 1980s. Original aluminum door frames develop pitting and white corrosion at the jamb-to-sill junction, so the door no longer closes square against its weatherstripping. That gap is a direct path for salt-laden, wind-driven rain into the wall cavity.
- Rusted electroplated hinges and handle sets. Cheap hardware on entry doors begins rusting within two years of salt-air exposure here, even on streets a few blocks from the Intracoastal. Once the hinges bind, the door frame takes the strain and the reveal goes out of square.
- Poorly flashed head joints. Doors installed in a hurry leave the head joint vulnerable, and wind-driven saltwater wicks behind the jamb. The rough opening rots, the frame sags, and the door fails inspection, a problem that is more common in this village because the inspectors know every property and catch it fast.
- Slabs replaced without addressing the jamb. We see homeowners pay to replace just a slab and keep the original Sea Ranch Lakes frame, only to watch the new door bind within a season because the old jamb was never square or sound. The salt air accelerates the failure, and the second job costs more than doing the jamb right the first time.
Pricing for Door Installation in Sea Ranch Lakes, FL
A typical entry door replacement in Sea Ranch Lakes runs $2,400 to $5,800. Double or French doors run $6,000 to $14,000. Pivot doors land between $5,000 and $11,000. Bifold and folding door systems begin around $7,000 and climb with panel count and glass spec. These ranges include a Miami-Dade NOA-rated door, hardware, labor, and the village permit route. What moves the number is the condition of the rough opening: older custom homes in the village often need reframing or jamb replacement once we open the wall, because salt air has been working on the framing longer than the homeowner could see.
Do not accept a quote that skips the village permit or specifies inland hardware on a coastal door. The cheap spec costs more within a decade. Call (813) 320-9346 and we will quote it on paper, line by line, free.
We Also Serve Cities Near Sea Ranch Lakes
TruePane handles Door Installation work in Sea Ranch Lakes and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live outside the village but within a short drive, the same crew, the same warranty, and the same written quote process apply. We know the coastal corridor and we know the inland differences that change the material spec for each job.
Serving Sea Ranch Lakes, FL - Our Local Coverage Area
We’re based in the Sea Ranch Lakes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Sea Ranch Lakes
Yes. Sea Ranch Lakes is an incorporated village, and window and door permit applications route through the village’s own administrative process before county inspections. Because the community is tiny, village staff and inspectors know every property personally, and a door installed without going through the village step can be tagged with a stop-work order the same day. We handle the village route on every job before opening a wall. Call (813) 320-9346 and we will walk you through the approval path for your specific street.
The village sits directly on the Intracoastal Waterway with the Atlantic Ocean less than a half-mile east, so near-constant salt-laden onshore winds oxidize aluminum frames and corrode hardware at a rate that outpaces most inland Broward communities. A door installation in Sea Ranch Lakes needs stainless steel hinges, marine-grade handle sets, and flashing rated for continuous coastal exposure, or the frame will fail years earlier than the same door inland. We spec the coastal hardware from the start.
A Miami-Dade Notice of Acceptance (NOA) means the entire door assembly, including the frame, glazing, and hardware, passed the most stringent impact and wind-load testing in the U.S. A standard impact door may carry a Florida Building Code approval but not the Miami-Dade NOA. Sea Ranch Lakes sits inside Broward County’s High Velocity Hurricane Zone, so every replacement door must carry the NOA. We install NOA-approved units here and register both warranty layers in writing before the truck leaves the driveway.
You can, but in most older village homes we advise against it. The original aluminum frames from the 1950s through the 1980s were never designed for modern wind-load requirements, and decades of Intracoastal salt air have usually corroded the jamb and sill beyond reliable repair. A new slab in an out-of-square or rusted frame binds, leaks, and fails inspection. We will assess the opening honestly and tell you if a slab-only swap makes sense. Call (813) 320-9346 for a straight answer.
The door unit itself costs about the same, but the hardware, flashing, and jamb preparation add $400 to $900 on a typical entry door replacement. Stainless hinges and marine-grade handle sets cost more than plated hardware, coastal flashing tape is priced differently than standard, and older custom homes in the village often need jamb replacement once the wall is open. The price gap is the difference between a door that lasts and one that rusts inside two years. We quote it line by line so you see exactly where the money goes.
If you are ready for a door that is square, sealed, and built for the salt air, call (813) 320-9346. We will bring the answer, the quote, and the warranty paperwork. Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sea Ranch Lakes and the surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After