Door Installation in Union Park - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Union Park

Door installation in Union Park usually runs $1,200 to $4,800 for a standard exterior door, and $3,500 to $11,000 for French or folding doors, depending on whether the opening is CBS block, what wind-load documentation Orange County wants on file, and what condition the original jamb is in when we open the wall. We work Union Park every week, and our crews know the ranch-block floor plans, the Dean Road corridor, the neighborhoods off Rouse Road, and the older additions that still carry jalousie frames. If you need a door set plumb and sealed right in Union Park, call (813) 320-9346 and a live person answers, day or night.

Call (813) 320-9346

Why TruePane Windows & Doors Is Union Park’s Preferred Door Installation Company

We have been setting doors and windows long enough to know that Union Park work is different from city work. The permitting runs through Orange County Building Division, not a city hall, and the inspectors look at product approvals more closely than most homeowners expect. We prepare for that before we quote. Our technicians measure every rough opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. That is The Keystone Standard, and it applies to every door we hang in Union Park.

Dale Kessler founded this company in 2008 out of a simple rule: if the pane is not true, the job is not done. That governs how we set doors, too. A door that binds in July or lets humidity through the threshold was never set right in the first place. We would rather take the extra hour to shim the jamb true, flash the rough opening with butyl tape, and document the wind-load compliance on the county paperwork than come back and argue about why the door swelled shut. Our crews are background-checked, uniformed, and local, and they work in a Union Park home the way they would work in their own mother’s house.

Our Door Installation Services in Union Park

Our Door Installation team handles every door, every opening, and every county requirement in Union Park. Here is what we do most often in your neighborhoods.

Entry & Swing Doors

Most Union Park homes were built between the late 1960s and mid-1980s, and the original entry doors on those CBS ranches are usually hollow steel or thin wood with a frame that has been repainted four times. We replace them with a properly set inswing or outswing door, and we handle the structural header modification when the rough opening is undersized. If the block was cut tight decades ago, we do not force a wider door into it. We reframe it, get the county approval, and set the door true.

Double & French Doors

French doors in Union Park fail two ways. The wood jambs rot from the inside because the original deck drainage was pitched toward the house on an open lot, or the aluminum frame loses its seal and the glass fogs permanently. We replace both conditions. Last fall we replaced a rear jalousie door on a 1970s CBS ranch off Dean Road with an Andersen 400 Series French door. The original aluminum frame had so much seal failure the argon was long gone, and the county required us to submit updated wind-load calcs before we could set the new jamb and flash it with butyl tape. That is Union Park work. We know how it goes.

Storm Doors

A storm door on an inland Orlando-area home is not for hurricanes. It is for cross-ventilation, for keeping the afternoon heat off the main door, and for a budget way to stop air moving through a worn entry. We install storm doors on Union Park homes where the main entry is serviceable but the homeowner wants airflow and a better seal, and we advise honestly on whether the existing jamb can carry the added weight. Some of the thinner older frames off Rouse Road cannot, and we will tell you that before we sell you anything.

Bifold & Folding Doors

Bifold and folding doors are growing on Union Park lots where a converted Florida room or a rear addition opens onto a patio. The issue on a 1970s block home is almost always the structural header. The original opening was framed for a jalousie unit, not for a multi-panel folding door, and the lintel was never sized for that span. Our crews will pull the county permit, reframe the opening properly, and submit the FBC wind-load documentation at permit time. That is not extras on the bill. That is the job, done right, priced up front.

Pivot Doors

We set pivot doors in Union Park where a homeowner wants a statement entry, but pivot hardware is unforgiving on a CBS wall. The side jamb carries weight differently than a hinged door, and the floor pivot needs a solid footer under it, not an old floating slab that cracked when the orange tree roots pushed through. We check the slab, check the header, and tell you straight if your 1978 ranch can carry a pivot door without a structural change. If it cannot, we scope the change before the quote, not after the wall is open.

Trusted Brands We Service in Union Park

We install and service doors from Simonton, PGT, and CGI, among more than a dozen lines we carry. For Union Park, the PGT and CGI impact-rated options matter because the county asks for wind-load documentation on replacement doors even though you are inland. We stock the local parts those brands need, so a door set off Alafaya Trail or around the Blanchard Park side does not wait on a part from out of state. We register both manufacturer warranty layers in writing before our truck leaves your driveway, and the 90-Day Done Right Promise covers the workmanship with no paperwork fights.

Common Door Installation Problems We See in Union Park Homes

Union Park is a late-1960s through 1980s unincorporated Orange County community dominated by concrete block ranch homes. That housing stock creates a specific set of door problems, and we see them all.

• Rotted wood jambs from decades of humidity and poor deck drainage on open lots. The original framing around a rear door draws moisture from the slab and the Florida air, and by year forty the jamb is soft enough to flex when the door swings. We replace the jamb, not just the slab, and address the drainage.
• Non-compliant jalousie or non-impact doors that fail Orange County wind-load review and stall the permit. If your rear door is the original jalousie unit, the county will not pass it under current Florida Building Code. We submit the approved product specs at permit time so the job does not stall at inspection.
• Undersized rough openings in CBS block that require structural header modifications before a wider swing door can be set. A 32-inch door cannot be stretched to 36 inches by trimming block. We reframe the header, document the span, and pull the permit Orange County expects.
• Seal failure on single-pane aluminum doors that makes the glass fog permanently. Once the argon is gone and the seal has let Central Florida humidity in, the door is a thermal liability. We replace it with a properly rated unit and register the warranty at installation.

Pricing for Door Installation in Union Park, FL

We Also Serve Cities Near Union Park

We work throughout unincorporated Orange County and the neighboring communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are looking for Door Installation in Union Park or in the surrounding area, call and we’ll put it on the schedule. Union Park is our local home base for this county permitting workflow, but the same crews cover the nearby cities with the same standard.

FAQs - Door Installation in Union Park