Door Installation in Washington Park - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Washington Park

Most door replacements in Washington Park run between $800 and $2,400 for a standard entry door, and between $2,500 and $6,000 once impact-rated assemblies and rough-opening reframing enter the picture. We tell you that upfront because the homes here, concrete block ranches from the 1950s through the 1970s, rarely accept a new door without some structural work first. Our crews know these streets, the permit office, and the way humidity eats aluminum frames on NW 23rd Avenue the same way it does on SW 28th Street. Call (813) 320-9346 and we’ll send someone out to measure, look at the opening, and give you a written number before you spend a dime.

Call (813) 320-9346

Why TruePane Windows & Doors Is Washington Park’s Preferred Door Installation Company

We’ve been installing doors in Broward County long enough to know that Washington Park is different from the subdivisions around it. The homes here were built when a jalousie door was considered adequate hurricane protection. It never was, and the county now agrees. Our technicians have reframed more out-of-square block openings in Washington Park than we can count, and they still treat every one like it’s the first. A door binds in July because the concrete settled in 1965 and nobody corrected the jamb. We correct the jamb.

Dale Kessler founded TruePane in 2008 after spending years in the trade watching installers hang doors out of plumb and walk away. The Keystone Standard came out of that frustration: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. If the pane is not true, the job is not done. That’s the rule, and it applies to every entry, storm, French, and custom door we set in Washington Park.

When you call (813) 320-9346, a live person answers. Not a voicemail tree. Not a callback form. That matters to homeowners who remember when a handshake meant something. We’re background-checked, uniformed, and on time. We’ll be there when we say. And if something isn’t right after we leave, the 90-Day Done Right Promise means we come back and make it right. No paperwork fights. No arguing.

Our Door Installation Services in Washington Park

Entry & Swing Doors

A front entry door in Washington Park has to do three jobs: keep out hurricane wind, keep out the afternoon rain, and keep out the heat. Most original doors here are single-pane aluminum that fail all three. We install fiberglass and steel entry systems rated for the High-Velocity Hurricane Zone, sized to your existing block opening, with flashing tape and a sill pan so water doesn’t find its way under the threshold during a summer downpour. It’s the door you touch every day. It should close square and latch without a shoulder behind it.

Storm Doors

On a Washington Park ranch, a storm door isn’t decorative. It’s the layer that takes the direct hit from Broward’s afternoon thunderstorms while the main door stays dry. We frame and set storm doors with the same NOA-rated hardware we use on full impact assemblies, because the county inspector will check. If your current storm door rattles in the wind or the closer snapped off the jamb, we can replace it same visit in most cases.

Double & French Doors

Double French doors opening onto a patio or back yard are common asks in Washington Park, especially on the larger lots off SW 19th Street that back up to open space. The complication is always the same: a 1950s block wall wasn’t framed for a six-foot opening, so we’re cutting, header installation, and buck framing before the doors ever go in. We handle the entire scope, including permit drawings, so you’re not left with a tarp over a hole in the wall. A wider opening changes how the room breathes. It also changes the structural load. We plan for both.

Bifold & Folding Doors

Bifold doors work well on Washington Park homes with a covered patio or lanai. They stack to one side and open the whole wall. The catch here is the lintel. Original block homes often have a shallow header over the back opening, and a multi-panel folding door asks more of that header than a single swing door ever did. We evaluate the load path before we quote. Some homes need steel reinforcement. Some don’t. We’ll show you photos either way.

Pivot Doors

Pivot doors are heavier than hinge doors, and on a concrete slab from the 1960s, the pivot point needs to bear on something solid. We’ve installed pivot doors in Washington Park where the entry opens onto a covered porch, and in one case where the homeowner wanted a wider glass entry that didn’t swing into the living room. These jobs take longer to scope because the subfloor and header both need verification. We measure twice, same as always.

Arched & Custom Doors

Washington Park has a surprising number of arched front entries, especially on the slightly newer block homes from the late 1960s and early 1970s. Matching an arched door to an arched opening means a custom frame, not a stock unit from a big box store. We order custom radius doors from manufacturers we trust, including Simonton and Ply Gem, and we template the opening ourselves before the order goes in. A custom door that’s off by half an inch is a very expensive mistake. We don’t make that kind of mistake.

Trusted Brands We Service in Washington Park

We’re an authorized installer for more than a dozen manufacturer lines, and for Washington Park homes we lean heavily on PGT and CGI impact-rated assemblies because they carry the Miami-Dade NOA your permit requires. We also work with Simonton for custom sizing on older openings. When you call, we’ll walk you through options side by side on paper, so you see exactly what each line costs and what each warranty covers. We stock common hardware and weatherstripping for these brands, which means faster turnaround on repairs and fewer return trips.

Common Door Installation Problems We See in Washington Park Homes

• Jalousie doors and sidelites failing wind-missile testing: Broward County code disqualifies jalousie assemblies as hurricane protection. If your side door or sidelite still has jalousie panes, you can’t just replace the glass. The entire opening must be converted to a NOA-rated impact assembly, and that means reframing, not a pane swap.
• Out-of-square concrete block rough openings: A 1960s block home settles. The opening that was square when Kennedy was president isn’t square now. If you hang a new door in an out-of-square opening without buck framing, the jamb racks, the seals fail, and the door starts binding within two seasons. We square the opening before we hang the door.
• Marine corrosion on aluminum door frames: Salt air and year-round humidity corrode aluminum frames faster than most homeowners expect. You won’t see rust, because aluminum doesn’t rust, but the frame swells with oxidation, the sashes bind, and the weatherstripping channels pucker. By the time it’s visible, the frame is usually done. We replace with marine-grade finishes or fiberglass that doesn’t corrode at all.
• Septic and well setbacks blocking door swing clearance: Washington Park has acreage lots with septic tanks and wells. County code sets minimum distances between those systems and any exterior door landing. A door that swings toward a septic line can fail inspection. We check setback lines before we quote, because the last thing you want is a door in place that the inspector tells you to move.

Pricing for Door Installation in Washington Park, FL

We Also Serve Cities Near Washington Park

Our crews handle door jobs throughout the surrounding area, including Door Installation work in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those communities and need a door replaced, measured, or assessed for hurricane compliance, the same team that works in Washington Park will come out and do the job right.

Understanding the Washington Park Door Replacement Scope

Here’s the thing most door quotes miss in Washington Park: this town isn’t like the rest of Broward County. Most of the homes are concrete block ranches from the 1950s through the 1970s, built before hurricane impact requirements existed, before modern door manufacturers standardized rough opening sizes, and before anyone thought about septic setback lines running under what is now a back door landing. A contractor who prices a Washington Park door replacement the same way they price a door in a 1990s stucco subdivision is going to under-scope the job, or worse, leave you with a door that won’t pass inspection.

On a ranch home off NW 23rd Avenue, our crew removed a corroded single-pane aluminum entry door that had lost its weatherstripping and begun binding in the jamb. We reframed the opening for a wider NOA-rated impact assembly, installed a fiberglass door with fusion-welded frame and flashing tape, and replaced the adjacent jalousie sidelite with an insulated glass unit, all before the county inspector pulled the permit for the storm-door retrofit. That’s Washington Park work: it starts as a door and becomes a structural correction because the original opening was never built to modern code.

What does this mean for your quote? It means we look at the whole opening before we put a number on it. We check the header. We check the slab. We check the setback lines if you’re on a larger lot with a septic system or well. And we check the rough opening dimensions, because a door frame that was fine for a jalousie unit in 1962 is rarely fine for an impact-rated assembly in 2026. If you’re comparing quotes, ask the other guys whether they’re including buck framing, permit drawings, and NOA compliance. If they hesitate, you’ve learned something.

FAQs - Door Installation in Washington Park