Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Palm Springs
Impact window and door work in Palm Springs, FL is different from the surrounding towns, and it comes down to what these homes are made of. Most of the village was built in the 1950s and 1960s as concrete block construction, and a large share of those original openings still hold aluminum jalousie windows that fail current Florida Building Code wind-load standards by a wide margin. TruePane Windows & Doors works this village steadily, and we know what those openings require before the first anchor goes in. If you’re pricing impact windows or doors for a Palm Springs home, call (813) 320-9346 and we’ll give you a straight read on it.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Impact Windows & Doors Company
We’ve spent years working the concrete block homes between Congress Avenue and Military Trail, and around the older streets off 10th Avenue North. That repetition matters. A crew that understands CBS construction, jalousie removal, and masonry flashing doesn’t burn your schedule figuring it out on site. Our Impact Windows & Doors team measures every opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers in writing before the truck leaves your driveway.
Dale Kessler founded this company in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That standard applies to every home we touch in Palm Springs, from the modest CBS ranches near Lake Clarke Shores to the mid-century blocks closer to Greenacres. Background-checked, uniformed technicians do the work, and a live person answers the phone when you call, any hour of any day.
Our Impact Windows & Doors Services in Palm Springs
Hurricane Impact Windows
For Palm Springs CBS homes, impact window installation is less about swapping glass and more about correcting what the original build got wrong. We pull the old jalousie frames, inspect the rough opening for spalling or cracked lintels, and set the new impact-rated unit with masonry anchors, not wood screws. The sealant and flashing detail is what keeps humid air and wind-driven rain out of the block. Andersen, ES Windows, and ECO Window Systems are the lines we quote most often in this village, always side by side on paper so you see the actual numbers.
Impact Sliding Glass Doors
Older Palm Springs homes frequently have a sliding door opening that was cut into the back wall decades after the original build, and the framing around it is rarely square. We address that before the new door goes in, shimming and flashing the rough opening so the track runs true and the panels seal tight against the wind. Florida Product Approval is the certification these units need in Palm Beach County, and we handle that paperwork as part of the job.
Impact Entry & French Doors
Front entries on these mid-century CBS homes are often narrow and set deep into the block, which makes door selection specific. We quote impact-rated entry and French door options that fit the existing opening without reframing the wall, and we match the threshold detail to the original slab height. The goal is a door that closes square in February and stays square in August.
Impact Garage Doors
Garage doors are the largest opening on most Palm Springs homes, and a non-rated door is a wind-load liability during a storm. We install impact-rated garage doors braced to the CBS wall with proper track anchoring and reinforced panels. The work ties directly into the wind mitigation inspection most insurers want before they’ll write or renew a policy here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We’re an authorized installer for more than a dozen manufacturer lines, and for Palm Springs work we quote Andersen, ES Windows, and ECO Window Systems most often. Each has product lines certified under Florida Product Approval, which is what Palm Beach County requires outside the Miami-Dade High Velocity Hurricane Zone. Because we stock common hardware and trim profiles for the CBS homes in this village, replacement parts and follow-up service happen faster than waiting on a regional distributor. You get the warranty from the manufacturer and the workmanship guarantee from us, both in writing.
Common Impact Windows & Doors Problems We See in Palm Springs Homes
- Jalousie tracks packed with wind-driven sand. The louvered glass in these original windows has open channels, and years of Palm Beach County storms push fine sand into the tracks until the louvers bind and the crank mechanism jams. The window becomes unopenable and, worse, unratable for insurance.
- Corner seal failures in original single-pane aluminum frames. The old frames flex with the concrete block, and after fifty years the corner gaskets fail. Humidity gets inside the glass unit, condensation fogs the view, and the window’s insulating value drops to near zero.
- Water wicking behind stucco from improperly flashed replacements. We see replacements done by crews that treated the CBS opening like a wood-framed wall. Without proper flashing tape layered over the sill and jambs, water follows the frame into the block, stains the interior drywall, and corrodes the new aluminum from the inside.
- Deal-condition replacements driven by inspectors and underwriters. Home sales in this village routinely stall when an inspector flags jalousie windows as uninsurable. That creates a hard deadline for replacement, and we work those schedules regularly, coordinating with closing dates and insurance re-inspection appointments.
Pricing for Impact Windows & Doors in Palm Springs, FL
A typical impact window replacement on a Palm Springs CBS home runs $900-$1,800 per opening, installed, depending on the window size, the manufacturer line, and the condition of the rough opening. Impact sliding glass doors land between $3,200 and $6,500 for most village homes, and impact entry doors run $2,500-$5,000. A full-home replacement with mid-range Andersen or ECO Window Systems units, including jalousie removal and masonry flashing corrections, typically totals $12,000-$28,000 on these single-story CBS floor plans. The number that moves is the opening prep. Cracked lintels, spalled block, or reframing a poor original cut adds real labor, and we put that on the quote in writing before we order anything. Custom millwork and specialty finish work, which this village’s mid-century homes often need, is quoted separately and fixed before we start. Call (813) 320-9346 for a free estimate with actual numbers, not a range printed off a national template.
We Also Serve Cities Near Palm Springs
TruePane runs crews into the surrounding communities regularly, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. The construction methods differ as you move out from the village’s CBS core into newer wood-frame developments, and our quoting reflects those differences. Call (813) 320-9346 and we’ll tell you which standard applies to your street.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Palm Springs
Plan for about 30-40% more labor time on a CBS home than on a wood-frame house of the same window count. The concrete block openings require masonry anchors, shimming that accounts for block irregularities, and flashing details that wood framing doesn’t need. A full-day jalousie-to-impact swap on a small Palm Springs ranch often runs into a second morning for trim and sealant work. Call (813) 320-9346 for a schedule estimate on your specific home.
Yes, and in this village it’s often the single largest premium reduction a homeowner can get. Jalousie windows are routinely flagged by inspectors as providing no wind-load protection, and many insurers will not renew a policy with them in place. Impact-rated units with Florida Product Approval, documented by a wind mitigation inspection, typically cut the windstorm portion of the premium by 30-60% depending on the carrier. We coordinate the inspection paperwork with the install.
No. Palm Springs is in Palm Beach County, which is outside the High Velocity Hurricane Zone that requires Miami-Dade NOA certification. Florida Product Approval is the standard here, and it covers the wind loads specific to this region. Going Miami-Dade adds cost without adding required performance for this village, so we quote Florida-approved lines unless a homeowner specifically requests the higher rating.
Opening prep is the line item that surprises people. Pulling old jalousie frames out of these concrete block walls often reveals spalled block, cracked lintels, or openings that aren’t square, and fixing those conditions is masonry labor, not window labor. On original-condition homes from the 1960s, opening prep can add $300-$700 per opening. We write that number on the quote before the job starts, and it doesn’t move once work begins.
No, not properly. Impact window installation on CBS construction requires access from both sides because the jamb anchoring and interior trim are part of what makes the unit perform under wind load. Anyone offering to set windows from the exterior only is skipping the interior flashing and anchoring detail that keeps the water out. We work room by room, keep interior disruption tight, and protect floors and furnishings while the work moves through the house. Call (813) 320-9346 to talk through what we’d need to access in your home.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.