Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Pinellas Park
Sliding and patio door replacement in Pinellas Park costs between $1,800 and $4,600 for a standard 72-inch vinyl slider, and between $3,400 and $7,800 for an impact-rated panoramic or heavy-duty unit on a concrete block home. The price swings depend on three things that hit Pinellas Park harder than most Florida cities: manufactured home sizing, permit-triggered structural upgrades on 1950s-70s CBS construction, and salt-air corrosion that eats aluminum frames from the inside out. Our team works these issues every week in Pinellas Park neighborhoods from the Mainlands to Bonnie Bay and along Park Boulevard. Call (813) 320-9346 to schedule a free estimate. A live person answers that number, day or night.
If you’re replacing a sliding door in Pinellas Park, this page tells you what actually happens on the job: how we handle non-standard rough openings in 55-plus manufactured home communities, when a permit forces a header upgrade, and why rollers bind and tracks corrode faster here than twenty miles inland. This is not a generic doors page.
Why TruePane Windows & Doors Is Pinellas Park’s Preferred Sliding & Patio Doors Company
We’ve worked on hundreds of sliding doors across Pinellas Park, and the jobs all share a pattern. The home was built between 1955 and 1975. The original door is a single-pane aluminum slider with a track that binds in July. And somewhere along the way, a homeowner got burned by a contractor who didn’t understand what they were opening up. That’s why we start every Pinellas Park job with a measurement visit that accounts for the actual rough opening, the wall construction, and the wind code for this part of Pinellas County.
Dale Kessler founded TruePane in 2008, but the way we work goes back further than that. His standard is on the whiteboard in the shop: if the pane is not true, the job is not done. That applies to every slider we set in Pinellas Park, whether it’s a patio door on a 1960s block home near 66th Street North or a HUD-code replacement in a manufactured home park off Bryan Dairy Road. We register both manufacturer warranty layers in writing before the truck leaves the driveway. We don’t ask the homeowner to chase paperwork later.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you’re buying. And when the job’s done, the 90-Day Done Right Promise covers the workmanship. No arguing about who caused what. If it’s not done right, we make it right.
We also understand what “local” means in Pinellas Park. Dispatch and scheduling are coordinated from our Miami metro office, but the crews who work on your home are local, trained, and familiar with Pinellas Park’s housing stock. They know what a Mainlands manufactured home rough opening looks like before they knock on the door. That matters when a standard off-the-shelf slider simply won’t fit.
Our Sliding & Patio Doors Services in Pinellas Park
Patio Sliding Doors
Most patio slider replacements in Pinellas Park involve pulling out a 1960s or 70s aluminum unit that’s corroded at the track, fogged at the glass, or binding so badly the homeowner has to shoulder-check it open. We replace it with a thermally broken vinyl or impact-rated aluminum slider sized to the actual opening. In manufactured home communities, that often means a special-order unit because the rough opening is 70 inches wide, not 72, and the frame depth is matched to the steel chassis of the home. We handle the special order, the flashing, and the anchoring. You don’t chase a supplier.

Panoramic Sliding Systems
A panoramic system replaces a standard two-panel slider with three, four, or more panels that stack or pocket to open an entire wall. On Pinellas Park’s 1950s-70s concrete block homes, this almost always triggers a structural review. The original header over the opening was sized for a 72-inch door, not a 12-foot opening. We handle the permit, the engineering, and the header upgrade as part of the quote, not as a surprise line item after the walls are opened. If you want a wide-open view from your Park Boulevard home onto the patio, we’ll tell you exactly what it takes before we touch anything.

Heavy-Duty Sliding Doors
Some Pinellas Park homeowners go heavier: multi-point locking sliders, impact-rated glass, reinforced frames. The salt air on the Pinellas Peninsula makes aluminum pitting a real concern, so we favor fusion-welded frames and stainless or coated hardware on these jobs. A heavy-duty slider in Pinellas Park typically runs $3,400 to $7,800 depending on width, impact rating, and whether the wall opening needs structural work. We give the number in writing before work starts.

Pocket & Barn Doors
Pocket doors and interior barn doors aren’t exposed to the weather, so the failure modes are different: worn track hardware, drywall cracking around the pocket, doors that jump the rail. We install and service both in Pinellas Park. If you’re reworking a hallway in a 55-plus community and need a pocket door that a walker or wheelchair can clear without fighting the hardware, we spec the track and the door to match that use.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinellas Park
We install and service sliding and patio doors from PGT, CGI, Simonton, Ply Gem, and more than a dozen other manufacturer lines. For Pinellas Park customers, that means we can order impact-rated PGT sliders, CGI aluminum units built for the Florida Building Code wind speeds in Pinellas County, and Simonton vinyl sliders side by side, then show you the quote on paper. No brand loyalty games. If you need a part for an existing door, we stock common rollers, tracks, locks, and weatherstripping locally in our service vehicles, so most repair work in Pinellas Park is finished in one visit.
We’re also very clear about the warranty. Both manufacturer warranty layers get registered in writing, with durations stated, before we leave your driveway. That’s the Keystone Standard. It’s not a verbal promise. It’s a document.
Common Sliding & Patio Doors Problems We See in Pinellas Park Homes
- Salt-air corrosion on aluminum frames and rollers. Tampa Bay is to the east and the Gulf is west, so the air over Pinellas Park carries enough salt to pit aluminum frames and seize roller bearings. We see doors here failing at 15 to 20 years that would last 25 to 30 inland. A track replacement with stainless hardware stops the cycle.
- Undersized headers over original 1950s-70s slider openings. The concrete block homes around 66th Street North and Bonita Park were built when a 72-inch slider was the widest opening anyone wanted. If you widen that opening for a panoramic system, the header gets replaced under permit. We quote that work up front, not after the wall is open.
- Non-standard rough openings in manufactured home parks. In the Mainlands and other 55-plus communities in Pinellas Park, original sliding doors are often 70 or 72 inches wide with frame depths matched to a HUD-code steel chassis. An off-the-shelf replacement from a home center leaves gaps at the perimeter. We special-order the correct unit and flash the opening properly.
- Fogged glass and failed seals on original single-pane sliders. The original doors on most Pinellas Park homes were single-pane aluminum. Once the seal fails, the glass fogs and the door does nothing for energy efficiency. Replacement with a dual-pane insulated unit solves both, and an impact-rated unit adds storm protection the original never had.
Pricing for Sliding & Patio Doors in Pinellas Park, FL
Expect these ranges for sliding and patio door work in Pinellas Park:
- Standard vinyl patio slider replacement (72-inch, site-built home): $1,800 - $3,200
- Impact-rated sliding door (PGT, CGI, or equivalent): $3,400 - $5,600
- Heavy-duty or panoramic sliding system: $4,200 - $7,800, plus structural work if the header is undersized
- Manufactured home sliding door replacement (HUD-code, special-order size): $2,200 - $4,400 depending on frame depth and impact rating
- Roller or track repair on an existing sliding door: $180 - $420
- Screen door installation: $140 - $340
These are Pinellas Park market numbers, not national averages. What changes the price most here is the home type. A manufactured home slider almost always involves a special order because the rough opening is a HUD size, not a stock residential size. A wide panoramic retrofit on a concrete block home usually means a permit and a header upgrade. We write the full number - allowances, permit fees, structural work - into the contract before we start. Call (813) 320-9346 for a free estimate. The number is answered live. Always.
We Also Serve Cities Near Pinellas Park
Our crews work throughout mid-Pinellas County, including Pinellas Park, Dunedin, Largo, Seminole, and Bay Pines. If you’re a few miles away and dealing with a salt-corroded slider or a manufactured home door that no one will touch, call us. This is what our Sliding & Patio Doors team handles day in and day out.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Pinellas Park
Yes, a permit is required for any replacement door that changes the size of the rough opening, and Pinellas Park enforces the Florida Building Code. On a 1960s CBS home, replacing a standard 72-inch slider with a wider panoramic unit usually requires a structural review of the header. Many original headers are undersized for wider openings, so the permit triggers a header upgrade. We pull the permit, handle the engineering, and quote the structural work before you sign. If we’re replacing the door at the same size with a like-for-like unit, the permit is typically straightforward. Call (813) 320-9346 and we’ll tell you exactly which category your project falls into, free.
In most Pinellas Park manufactured home communities, including the Mainlands, you need a special-order unit, not a stock Andersen or Pella slider from a big-box store. Manufactured home rough openings are frequently 70 inches wide with frame depths built for a HUD-code chassis, not the 72-inch residential standard. A standard unit leaves gaps at the perimeter that compromise the weather seal and lead to leaks within a year. We measure the rough opening, order the correct HUD-compliant replacement, and anchor it to the steel chassis with jamb screws and butyl flashing tape. Call (813) 320-9346 for a free measurement visit.
The salt-laden air from Tampa Bay and the Gulf accelerates pitting and oxidation on aluminum slider frames and roller bearings, so hardware fails here in 15 to 20 years instead of 25 to 30 inland. Tracks corrode, rollers bind, and the door gets harder to move until it seizes. The fix is replacing the track and rollers with coated or stainless components, and switching to a thermally broken or impact-rated frame if the original aluminum is heavily pitted. Annual cleaning of the track and a light silicone lubricant on the rollers slows the damage. For a full assessment, call (813) 320-9346.
You can do them together, and in most Pinellas Park homes it’s the cheaper route per opening. Many 1950s-70s CBS homes still have original jalousie windows and a single-pane aluminum slider, all of which need impact-rated replacements under Pinellas County’s wind code. Combining the work means one permit, one mobilization, and one trim-and-stucco patch pass around every opening. We quote the whole package side by side on paper so you can compare doing it all at once versus phasing it. Call (813) 320-9346 for a free estimate.
Yes, in practice. Pinellas County sits in the Florida Building Code’s high-velocity wind zone with a design wind speed of roughly 130 mph. Any permitted replacement door must be impact-rated or product-approved. You cannot install a non-impact sliding door as a permitted replacement in Pinellas Park. Some homeowners attempt unpermitted swaps to save money, but that puts the house out of code compliance and can become a problem at resale or after a storm. We quote impact-rated PGT, CGI, Simonton, and Ply Gem units so you get a compliant door at the best number. Call (813) 320-9346 for exact pricing.
Call TruePane Windows & Doors in Pinellas Park
If you live in Pinellas Park and your sliding door binds, corrodes, leaks, or just doesn’t close square anymore, we’ll measure it, quote it in writing, and do the work right the first time. The 90-Day Done Right Promise covers the workmanship. The Keystone Standard covers the warranty paperwork. A live person covers the phone at (813) 320-9346, 24 hours a day. Call today to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors. The whiteboard rule still stands: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After