Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Pinewood
Sliding and patio door replacement in Pinewood, FL typically runs $2,400-$6,800 for a standard NOA-certified impact slider, and the job is almost always custom-ordered because of the neighborhood’s non-standard CBS openings. We’re TruePane Windows & Doors, and we’ve been setting doors in Miami-Dade’s High Velocity Hurricane Zone long enough to know that a Pinewood slider swap is never a grab-and-go retrofit. If you’re on NW 103rd Street or near the I-95 corridor with a corroded aluminum slider that sticks in July, call (813) 320-9346 and we’ll measure the opening, verify the NOA, and give you a written price before any order gets cut.
Why TruePane Windows & Doors Is Pinewood’s Preferred Sliding & Patio Doors Company
Pinewood homeowners call us because the houses here are not like the subdivisions north of the county line. The CBS construction, the jalousie-era rough openings, the salt air that eats aluminum thresholds – it all requires a crew that reads Miami-Dade NOA lookup tables the way a roofer reads a rain forecast. Our technicians are background-checked and uniformed, and they measure every opening twice before quoting anything. That habit matters more in Pinewood than almost anywhere else in South Florida, because a half-inch miss on a 1950s CBS opening turns a one-week slider job into a three-week custom reorder.
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. Since then our Sliding & Patio Doors team has rebuilt thresholds, reframed jambs, and ordered more custom impact units for Pinewood homes than we can count. Both manufacturer warranty layers get registered in writing before the truck leaves your driveway, and every job carries the 90-Day Done Right Promise. If it is not right, we make it right. No paperwork fights, no fine print that covers neither.
Our Sliding & Patio Doors Services in Pinewood
Patio Sliding Doors
A standard patio slider in Pinewood almost always means a custom or semi-custom NOA-certified impact unit, because the original 1950s and 60s openings were never framed to today’s panel dimensions. We quote manufacturer lines side by side on paper – Andersen, ES Windows, ViewLux – so you see exactly what you’re buying before you commit. Single-panel and two-panel configurations both work, but the rough opening dictates what fits, and in Pinewood that opening is rarely standard.
Panoramic Sliding Systems
Multi-panel panoramic systems are the high-end option on Pinewood’s larger CBS lots, particularly where homeowners want a full wall of glass onto a patio or pool deck. These units run $6,000-$14,000 in Pinewood, and the lead time is driven by the glass spec, not our labor. Low-E insulated glazing with argon fill adds three to five weeks to the order. We quote the full system in writing, lock the price before ordering, and register the warranty layers the day the order is confirmed.
Heavy-Duty Sliding Doors
For Pinewood homeowners replacing a failed slider with something that can take a tropical system head-on, heavy-duty impact sliding doors are the answer. These units carry a Miami-Dade NOA and are tested for wind-borne debris, which matters when you live entirely inside the HVHZ. Expect $3,400-$8,200 depending on glass package and panel width. The frame is only as good as the jamb it sits in, so we rebuild the rough opening to true NOA spec before the door ever arrives.
Pocket & Barn Doors
Pocket doors in Pinewood CBS homes are a different animal from the track-and-carriage jobs in timber-framed houses. The wall cavity has to be opened, the header has to be re-engineered, and the rough opening has to match the NOA-certified panel – not the other way around. Barn doors are simpler, but they still need a true header and a level floor line. Our Pinewood crews have set both in homes from the 1950s all the way up to recent remodels, and we match the hardware and trim to the house, not the catalog.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinewood
We’re an authorized installer for more than a dozen manufacturer lines, and in Pinewood we quote ES Windows, and Andersen most often because those brands maintain current Miami-Dade NOAs across their impact slider and panoramic lines. ECO Window Systems is another strong option for budget-conscious NOA-certified sliders. We don’t push one brand. We quote the lines side by side on paper, you compare the wind-load ratings and the glass packages, and you decide. Local stock and fast parts turnaround for Pinewood customers means no two-week wait on a replacement roller or a threshold cap.
Common Sliding & Patio Doors Problems We See in Pinewood Homes
- Corroded thresholds on original aluminum sliders. Pinewood’s year-round humidity and salt air eat the metal track at the base of a slider within a decade. The door starts to bind, then the seal fails, then water finds its way under the sill and into the floor framing. A new impact-rated unit on a rebuilt threshold is the only permanent fix.
- Non-impact sliders that fail permit review. Pre-Andrew Pinewood homes frequently have sliding glass doors that predate Florida’s HVHZ wind-load requirements. When the permit is pulled, the unit fails the NOA wind-load calculation and the job stalls until a custom impact-rated panel is specified. We catch this at the measuring visit, not at the permit counter.
- Jalousie rough openings reused for sliders. Builders and handymen sometimes drop a new slider into an old jalousie opening without checking Miami-Dade’s NOA lookup. The door arrives, does not fit the non-standard CBS opening, and the homeowner waits weeks for a second custom order. We measure every jamb, header, and sill against the NOA spec before we quote a single number.
- Seal failure from UV and humidity. South Florida’s sun breaks down the edge seals on older insulated glass units, and Pinewood’s humidity finishes the job by fogging the glass. Once the seal is gone, the argon fill leaks out and the unit loses its insulated performance. Replacement glazing or a full door swap is the fix, depending on the frame.
Pricing for Sliding & Patio Doors in Pinewood, FL
A patio slider replacement in Pinewood starts around $2,400 for a basic two-panel NOA-certified impact unit and runs to $6,800 for a larger opening with low-E insulated glass. Panoramic sliding systems run $6,000-$14,000. Heavy-duty impact sliders land between $3,400 and $8,200. Pocket door retrofits in CBS walls run $4,500-$9,500 because the wall cavity work drives the labor. What moves the price in Pinewood specifically is the rough opening: if your 1958 CBS home still has a jalousie-era opening, the custom sizing adds 15 to 25 percent over an off-the-shelf slider. We quote the full job in writing before ordering, and the price is fixed. Call (813) 320-9346 for a free estimate that accounts for the actual opening in your wall, not a generic price sheet.
We Also Serve Cities Near Pinewood
TruePane crews serve Pinewood and the surrounding South Florida communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live near Pinewood and need a sliding or patio door measured, quoted, and installed by a crew that understands Miami-Dade NOA requirements, call (813) 320-9346. Dispatch and scheduling are coordinated from our Miami office, and crews serve Pinewood locally.
Serving Pinewood, FL - Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Pinewood
You can keep the jalousies, but the sliding door still has to meet current Miami-Dade NOA wind-load requirements on its own, and a permitted renovation cannot retain a non-impact opening in a new or altered wall. What trips most homeowners is the rough opening: the builder who framed your jalousie wall sizing in 1962 was not working to today’s NOA panel dimensions. We measure against the NOA lookup, quote the custom unit, and leave the jalousies alone if they’re not in the scope of work. Call (813) 320-9346 and we’ll tell you exactly what the permit will require before you spend a dollar.
Add three to five weeks to the order, minimum. Custom glass packages, especially low-E insulated units with argon fill, are cut and tempered to order, and the manufacturer will not release the unit until the NOA documentation is confirmed. Our job is to order early, lock the price in writing, and keep you informed of the production schedule. The labor on our end takes two to three days once the unit lands. The lead time is what it is – we don’t promise a date we cannot keep. Call (813) 320-9346 for a written timeline based on your exact glass spec.
No. Some national sliding door lines do not maintain current Miami-Dade NOAs for impact-rated configurations, which means they cannot be installed in a permitted Pinewood replacement. We quote the brands that do – Andersen, ES Windows, ECO Window Systems among them – and we can show you the NOA number for the exact unit before you commit. If a contractor quotes you a slider for Pinewood and cannot produce an NOA, walk away. Call (813) 320-9346 and we’ll show you the paperwork first.
Look at the threshold first. If the aluminum is pitted, corroded, or caked with white oxidation, the frame is compromised and the door is no longer seating properly, which voids the impact rating even if the glass is still certified. Fogged glass means the edge seal has failed and the unit has lost its insulated gas fill. If your door predates Hurricane Andrew, it likely never had an NOA impact rating to begin with. We’ll inspect the frame, the glazing, and the NOA documentation if you have it, and give you a straight answer. Call (813) 320-9346 for a free inspection.
Yes. We work with the original door casing profiles and baseboard dimensions if they are still intact, or replicate them from the existing trim elsewhere in the house. The challenge in a Pinewood CBS home is not the trim – it’s the wall cavity. The pocket has to be framed to carry the NOA-certified panel, and the header has to be re-engineered to carry the load across the wider opening. We rebuild the opening to NOA spec, then trim it to match the 1950s profile. Call (813) 320-9346 and bring us a photo of the existing trim; we’ll tell you what is salvageable.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinewood and South Florida since 2008 of combined craft and community service.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.