Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Pittman
Window installation in Pittman comes down to two things most contractors never mention up front: wind-load compliance under Florida Building Code, and moisture control in a climate where relative humidity sits above 80% most of the year. A replacement window that looks fine on day one can fog between the panes or leak at the sill within two seasons if either requirement gets skipped. TruePane Windows & Doors has worked on the older wood-frame and manufactured homes that make up so much of Pittman’s housing stock, and we quote every job with both the code and the humidity in writing. Call (813) 320-9346 for a free estimate, and you’ll get a line-by-line quote that names the glazing rating, the flashing method, and both warranty layers before any work starts.
Why TruePane Windows & Doors Is Pittman’s Preferred Window Installation Company
We’re not the cheapest quote you’ll get in Pittman, and we won’t pretend to be. What we are is the company that answers the phone when something goes wrong two years after the install. TruePane has served Florida communities since 2008 through a craft tradition started by second-generation glazier Dale Kessler, who founded this company in 2008 with one rule on the whiteboard: if the pane is not true, the job is not done. That rule governs every opening we set in Pittman, from a single casement on an older ranch to a full house of impact-rated double-hungs.
The technicians we send to Pittman are background-checked, uniformed, and trained to work in a customer’s home the way they would work in their own mother’s house. They measure every opening twice. They quote manufacturer lines side by side on paper, not over the phone from a brochure. And they register both warranty layers before the truck leaves the driveway, under The Keystone Standard. That’s what a square deal looks like on a Pittman window job.
Our Window Installation Services in Pittman
We handle the full range of residential window work in Pittman, and we’re an authorized installer for Window Installation products from manufacturers including Andersen, Pella, Marvin, and Milgard. The sub-services below cover most of what Pittman homeowners ask us for.
Casement Windows
Casements are a strong choice for Pittman because they seal tighter than sliding windows when cranked closed, which matters when wind-driven rain comes off the St. Johns River corridor during summer thunderstorms. We frequently recommend impact-rated casements for east- and south-facing openings on older wood-frame homes, where the original aluminum units have lost their gaskets and the frames have started to pull away at the sill.

Awning Windows
Awning windows are common in Pittman’s older housing stock, and they’re also one of the best options for the area’s humidity because they shed water naturally when open. The problem we see most often is that original 1960s and 1970s awning units were single-pane and now show rotted sills and jambs once the trim comes off. We replace them full frame, with sill flashing laid before the new unit goes in, which is the only way to stop the St. Johns moisture from coming back.

Fixed & Picture Windows
A fixed picture window gives Pittman homeowners a view of the river corridor without moving parts to bind or leak. But fixed doesn’t mean maintenance-free. Older picture units in this area frequently fail at the seal because decades of high humidity have worked the desiccant inside the insulated glass. We quote replacement glazing with the specific wind-load rating required for the home’s exposure category, not whatever is cheapest on the shelf.

Single & Double Hung
Single and double hung windows are the most common replacement request we get in Pittman, especially on manufactured homes and older ranches. The originals are typically single-pane aluminum with no thermal break, and the frames have corroded so badly at the corners that the sashes no longer seat square. We set new hungs with flashing tape at every sill and jamb transition, then register the manufacturer’s warranty in writing before we leave.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pittman
We are an authorized installer for more than a dozen manufacturer lines, and for Pittman customers we keep local inventory on hand for the brands most requested in this market: Andersen, Milgard, and ES Windows. That means a Pittman homeowner doesn’t wait on a regional warehouse to ship parts when a sash needs hardware or a seal needs warranty attention. For impact-rated work on river-corridor homes, we also quote ECO Window Systems where the budget calls for a mid-tier line with a strong wind-load rating. Whatever line fits your opening and your exposure, we put the side-by-side numbers on paper so you see exactly what you’re buying.
Common Window Installation Problems We See in Pittman Homes
Below are the failure patterns we walk into most often in Pittman, based on the housing stock and the humidity profile of the St. Johns River corridor.
- Rotted rough openings hidden behind patched trim. On 1960s wood-frame homes near the river, we regularly find that jalousie and awning windows have been patched with foam and caulk for decades. Pull the window, and the sill and jamb are structurally gone, which turns a glass swap into a carpentry job before any window gets set.
- Fogged insulated glass from accelerated seal failure. Year-round humidity above 80% moves moisture through older single-pane frames and saturates the air gap in double-glazed units far faster than in drier inland counties. The fog between the panes is a failed seal, and no cleaning product fixes it. The unit has to be replaced.
- Non-impact glazing from a big-box store. A window that looks impact-rated from the curb may not carry the design pressure rating Florida Building Code requires for a Pittman home’s wind exposure. That passes a visual check but fails an inspection, voids the permit, and leaves the homeowner exposed on an insurance claim after the first thunderstorm.
- Missing or deteriorated flashing at the sill and jamb. When old aluminum frames come out and new windows go in without new flashing tape at the transitions, St. Johns River humidity wicks into the rough opening. Within two seasons the new low-E glass is fogged and the sheathing below the window is soft. Flashing is not optional in this climate.
Pricing for Window Installation in Pittman, FL
A standard full-frame replacement on a double-hung window in Pittman typically runs $600 to $1,200 per opening, depending on size, framing condition, and whether the unit is impact-rated. A casement replacement in Pittman often lands between $700 and $1,400 per window. Awning windows, which are smaller but frequently require full frame work due to rotted sills in older Pittman homes, run $500 to $1,100 each. A large fixed picture window with impact-glazed glass can range from $1,200 to $3,000. These numbers assume standard siding and no hidden structural repair. If we find rotted framing at the rough opening, which happens often near the river corridor, the carpentry is quoted separately and in writing before we proceed. We offer a permanent 5% discount for seniors and veterans in Pittman, and every quote is free. Call (813) 320-9346 and we’ll put the exact numbers on paper for your openings.
We Also Serve Cities Near Pittman
TruePane’s Window Installation in Pittman service area extends to nearby communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you live in any of these areas and need window work done to the same Florida Building Code standard we apply in Pittman, we’ll schedule a measuring visit and give you a written quote.
Serving Pittman, FL - Our Local Coverage Area
We’re based in the Pittman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Pittman
Pittman sits within a wind-borne debris region, which means any new window or door must meet the design wind-speed requirements for its specific exposure category, not just a generic “impact” label. The rating is determined by the home’s location relative to open water, surrounding tree cover, and roof height, and it appears on the product approval sheet we register with the permit. A compliant quote lists the design pressure rating for each opening. Call (813) 320-9346 and we’ll tell you what the code requires for your specific street in Pittman.
In almost every case we see in Pittman, a jalousie window that is old enough to need glass is also rotting at the rough opening. The slats, the frame, and the sill have been trapping moisture behind the trim for decades in this humidity, and swapping only the glass leaves that rot in place. You need a full frame-and-opening replacement, with new framing lumber where the old wood is soft, flashing tape at every transition, and a window rated for the wind load on that wall. We quote that work as one line item so there’s no second appointment left hanging.
Insurance carriers in Florida increasingly ask whether window replacements were permitted and whether the installed glazing carries a product approval matching the home’s wind exposure. If a window fails during a storm and the paperwork shows a non-rated unit or no permit, the claim can be reduced or denied outright. Documented compliance, with the permit closed and both warranty layers registered, is the paper trail that protects you. That documentation is exactly what The Keystone Standard provides on every Pittman job we complete.
Fog between the panes is a failed seal, and Pittman’s position in the humid St. Johns River corridor accelerates that failure. When outside air stays above 80% relative humidity year-round, moisture is constantly pressing against the edge seal of the insulated glass unit. The desiccant inside the spacer gets saturated faster, and once it’s spent, condensation forms between the panes. Coastal and river-corridor homes see this years earlier than homes in drier inland counties. The fix is a new sealed unit, not a cleaning. Call (813) 320-9346 and we’ll tell you if your fogged window is a warranty issue or a replacement.
A compliant quote should name the manufacturer and specific product line for each window, the design pressure rating that product carries, the flashing method and materials, whether the permit is included, and whether both manufacturer and labor warranty layers get registered in writing. A cheap quote often lists only “window installed” with no rating, no flashing line, no permit line, and no warranty registration. That’s how Pittman homeowners end up with fogged glass and a denied claim two years later. Our quotes never leave those lines blank.
Call TruePane for Window Installation in Pittman
If you’ve lived in Pittman long, you’ve probably had a window patched when it should have been replaced, or a quote that looked square until the bill showed up. We do the work the way we would on our own family’s home: measured twice, flashed properly, rated for the wind, and registered in writing. A live person answers our phone 24 hours a day, 7 days a week, not a voicemail tree. Call (813) 320-9346 to schedule your free estimate, and we’ll walk your openings with you and put the numbers on paper before anything gets ordered.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pittman and Florida communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After