Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Taft
Window replacement in Taft usually runs between $450 and $1,400 per opening for a standard vinyl or aluminum retrofit, and a full-frame replacement with code-required upgrades lands between $900 and $2,200 per window. Most Taft homes we work on were built between the 1950s and 1970s, and many still carry original single-pane aluminum sliders or jalousie units that cannot meet Florida Energy Code today. That means the job is rarely just swapping glass. It means pulling permits, upgrading to low-E insulated glass, and often rebuilding the opening itself. Call (813) 320-9346 for a free estimate, and we’ll walk the house with you before you commit to anything.
Why TruePane Windows & Doors Is Taft’s Preferred Window Replacement Company
We’ve spent more than years in Florida window and door work, and Taft’s housing stock is the kind we know best: modest CBS block homes from the post-war decades, built well but built for a different climate code. Dale Kessler founded TruePane in 2008 on a rule that still hangs in our shop: if the pane is not true, the job is not done. That standard carries to every opening we set in Taft, from a simple bedroom insert to a full-frame rebuild on a jalousie wall.
Homeowners in Taft call us because the alternative has burned them before. A 1990s retrofit that fogged between the panes within ten years. A contractor who never pulled the Orange County permit and left them holding the paperwork. Our crews are background-checked and uniformed, and we register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it applies to every job, no exceptions.
We also answer the phone. A live person picks up 24/7, not a call tree. When a Taft homeowner has a failed seal or a window that won’t close against the afternoon thunderstorm, they don’t want a callback form. They want a voice. Ours is always there.
Our Window Replacement Services in Taft
Full Frame Replacement
Full-frame replacement in Taft means removing the existing window down to the rough opening: frame, sill, trim, and all. On Taft’s older CBS homes, that’s often where the real problems surface. We find rotted wood surrounds from years of wind-driven rain, block cavities that have been wicking moisture for decades, and openings that were never properly sealed when the house was built. We rebuild the opening, flash it correctly, set the new frame square and plumb, and trim it out so it sheds water the way it should. Full-frame is the right call when the jamb is compromised or when code requires a U-factor that a retrofit insert can’t hit.
Insert Window Replacement
An insert, or retrofit pocket window, fits into the existing frame when that frame is still sound. For many Taft homes, this is the most cost-effective path. The original aluminum track gets replaced with a new fusion-welded vinyl or aluminum unit carrying low-E glass and argon fill, and the job can often be done in a single visit. We measure every opening twice before ordering, so the insert seats cleanly the first time. If we open the wall and find rot or a bowing frame, we stop and show you before proceeding. No surprises, no change orders slipped in after the fact.
Storm Window Replacement
Taft sits through a June-through-September storm season that brings wind-driven rain nearly every afternoon. A storm window that rattles, leaks, or no longer latches is a signal the opening needs more than a stopgap. We replace storm units with impact-rated or high-DP-rated glass where the home’s exposure warrants it, and we tie the new frame into the existing weather barrier so water stays outside the block wall. For homes directly under the Orlando International Airport approach, we also run acoustic calculations so the replacement window handles both storm noise and jet noise.
Energy-Efficient Upgrade
Single-pane aluminum windows are thermal sieves. In Taft’s climate, they dump solar heat into the house from April through October and bleed cooled air out all year. Upgrading to low-E insulated glass with argon fill typically cuts solar heat gain by 40% or more, and on a 1,500-square-foot CBS home that translates directly to a lower electric bill. We quote manufacturer lines side by side on paper, so you see the exact U-factor and SHGC of each option before you buy. Orange County enforces Florida Energy Code on every permitted replacement, so we do the permit paperwork and the compliance check as part of the job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Taft
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Taft homes we frequently recommend, PGT, and CGI depending on what the opening is up against. Simonton’s double-hung and casement units hold up well in the humid subtropics and carry a strong warranty when registered properly. PGT and CGI are the go-to choices for impact-rated openings, and CGI’s laminated glass also does meaningful work cutting airport noise. We stock common parts locally for Taft customers, so warranty service calls don’t wait on a distributor two counties away.
Common Window Replacement Problems We See in Taft Homes
- Jalousie windows still in service. These louvered glass units were a post-war Florida staple, and Taft still has plenty of them. They cannot be retrofitted to meet current Florida Energy Code U-factor requirements, so Orange County will not pass a repair. Full replacement is the only legal path.
- Single-pane aluminum sliders leaking wind-driven rain. The original sliders on 1950s and 1960s CBS blocks have no thermal break and no meaningful seal against a summer squall. Water gets into the block cavity, rots the wood surround, and drives cooling loads through the roof.
- Fogged insulated glass from seal failure. We see a second replacement cycle in Taft that neighboring cities don’t. Homeowners who put in standard double-pane units during the 1990s are finding the seals failed under airport vibration and humidity swings. The glass fogs, the noise comes back, and they’re upgrading again, this time to laminated acoustic glass.
- Failed flashing at the sill. On older Taft blocks, the original flashing was often just a bead of caulk. Forty years of UV and storm water later, the sill rots, the window drops, and the opening starts pulling away from the block. We strip it down, reset the flashing with modern tape and pan systems, and give the new unit a true drainage path.
Pricing for Window Replacement in Taft, FL
A straightforward insert replacement in Taft typically lands between $450 and $1,400 per window, depending on size, glass package, and frame material. Full-frame replacement on a CBS block opening runs $900 to $2,200 per window because it includes demolition, flashing, any necessary framing repair, interior trim, and the permit. Acoustic laminated glass for homes under the Orlando International flight path adds roughly $150 to $400 per opening versus standard low-E. Impact-rated units from PGT or CGI add a similar premium. We quote every job with line items and a fixed number before work starts, and our Done Right Promise covers the labor in writing. Call (813) 320-9346 for a free estimate on your specific windows.
We Also Serve Cities Near Taft
Our crews work Taft regularly, and we also serve homeowners in Window Replacement projects across Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just outside town and need the same level of accountability, call (813) 320-9346 and ask. For a full look at what we do, see our Window Replacement in Taft service area details.
Serving Taft, FL - Our Local Coverage Area
We’re based in the Taft area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Taft
Yes. Orange County requires a permit for every window and door replacement, and the permit triggers Florida Energy Code compliance on the new units. That means the replacement glass must meet current U-factor and SHGC ratings, which older single-pane and jalousie windows simply cannot do. We pull the permit, handle the inspections, and register both warranty layers as part of the job. Call (813) 320-9346 and we’ll walk you through the code path for your specific home.
No. Jalousie windows cannot be retrofitted to meet Florida Energy Code U-factor requirements, so Orange County will not pass a repair-based permit. The opening must be fully reframed and a code-compliant replacement installed. Many Taft homeowners use this as the moment to upgrade to low-E insulated glass with acoustic benefits. Call (813) 320-9346 to get an exact quote on converting your jalousie openings.
Laminated glass is the workhorse for jet noise. The PVB interlayer between the glass panes damps sound transmission far better than standard dual-pane, and when paired with low-E coating and argon fill, it also hits the Florida Energy Code U-factor. For homes directly under the approach corridor, we typically spec a laminated outer pane with a standard inner pane and show you the acoustic performance data on paper. Call (813) 320-9346 for pricing on acoustic packages.
It’s very common in Taft, more so than in quieter inland suburbs. The combination of airport vibration, humid subtropical air, and rapid temperature swings shortens seal life on older insulated glass units. When the seal fails, moisture gets between the panes and you lose both insulation and noise reduction. The fix is full replacement of the insulated glass unit, and for many Taft homeowners it’s worth stepping up to laminated acoustic glass while the opening is apart. Call (813) 320-9346 for a site check and a written quote.
Impact-rated windows are not required by code for most single-family homes in Taft, but they are worth considering if the home sits in an exposed area or if you simply want the extra protection during storm season. The bigger driver for many Taft homeowners is acoustic performance from the airport flight path, and laminated impact glass happens to serve both purposes. We quote PGT and CGI impact lines side by side with standard low-E options so you can see the cost difference in writing before deciding. Call (813) 320-9346 for a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Taft and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.