Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Wedgefield
Window replacement in Wedgefield runs $480-$1,900 per opening for manufactured-home sized units, and $650-$2,400 for full-frame work on site-built ranch homes. Most jobs take one day once materials are on hand. If you’re calling from a lot off Wythea Drive, Maximilian Avenue, or anywhere along the St. Johns River basin corridor, we already know what your walls look like inside. Call (813) 320-9346 and we’ll give you a written line-item quote before any work begins.
We’re Window Replacement specialists who have spent years working on Wedgefield’s housing stock, which is not the same as the tract subdivisions twenty minutes west. Manufactured homes, pier foundations, flood-zone parcels, thin-wall aluminum framing. If you’ve had a contractor quote you Orlando pricing and then go quiet when they saw your rough openings, you know the difference. We don’t go quiet. We measure twice, quote on paper, and do the job to code.
Key Takeaways for Wedgefield Homeowners:
- Manufactured-home windows need specialty sizing (often 74″ x 46″ or 72″ x 48″ rough openings), not big-box standard units.
- Flood-zone parcels in Wedgefield trigger Orange County floodplain code requirements that most window crews never deal with.
- Free estimates are line-item written quotes. The number we give you is the number you pay, unless we find hidden damage, and then we show you photos and get written approval before we touch it.
- Call (813) 320-9346. A live person answers, 24 hours a day, 7 days a week.
Why TruePane Windows & Doors Is Wedgefield’s Preferred Window Replacement Company
TruePane Windows & Doors was founded in 2008 by Dale Kessler, a second-generation glazier. The company has served local communities since 2008 through a craft tradition that doesn’t cut corners on flashing, rough-opening prep, or warranty paperwork. In Wedgefield, that history matters because the housing stock demands it: manufactured homes with non-standard framing, ranch homes on pier foundations that settle, and humidity that never lets up.
Our background-checked, uniformed technicians service Wedgefield regularly. We’re not a franchise that sends a rotating cast of subcontractors. The crew that measures your openings is the crew that installs your windows. Every job is backed by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves your driveway. No arguing later about what’s covered. It’s in writing.
Dale Kessler’s founding rule has not changed: if the pane is not true, the job is not done. That governs every install we do in Wedgefield, from a single fogged slider replacement to a full-frame energy-efficient window retrofit on a three-bedroom ranch.
Our Window Replacement Services in Wedgefield
Full Frame Replacement
Full frame replacement in Wedgefield means pulling the entire old window down to the rough opening, including the exterior trim and interior casing. This is often the only viable option on older manufactured homes where the original install used nothing but caulk at the sill. We inspect the framing before we quote, write allowances for rotted rim joists or particleboard sills into the contract, and price any hidden damage in writing before we proceed. A typical full-frame job on a ranch home in Wedgefield runs $650-$2,400 per opening depending on window size and frame condition.
Insert Window Replacement
Insert replacement works when the existing frame is square and solid. On Wedgefield pier-foundation homes, that’s less common than you’d hope. Uneven settling throws sashes out of square over decades. If the frame passes inspection, inserts run $480-$1,100 per opening and go in faster with less trim work. If it doesn’t pass, we’ll tell you and show you photos. No pressure, just the truth.
Storm Window Replacement
Wedgefield sits low in the St. Johns River basin, and summer tropical systems funnel moisture east across this corridor. Storm window replacement and sliding patio door upgrades here are not optional for most homes. We install impact-rated and storm-rated systems sized for manufactured-home openings, with the proper nail-fin or flange configuration for thin aluminum framing. Expect $550-$1,600 per opening depending on whether you’re adding storm panels or full impact units. Both manufacturer warranty layers get registered in writing on every storm job.
Energy-Efficient Upgrade
Low-E glass and argon fill make a measurable difference in Wedgefield, where humidity drives condensation against vinyl frames in poorly ventilated wall cavities. On manufactured homes, we recommend fusion-welded vinyl frames with low-E coated glass and argon fill sized to your exact rough opening. The upgrade typically adds $90-$210 per window over standard clear glass, and it reduces condensation, heat gain, and the mold risk that hides behind thin mobile-home wall panels. For flood-zone parcels, we also check weep-hole function and sill drainage while we’re in there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wedgefield
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Wedgefield’s manufactured homes, we frequently quote ES Windows because their fusion-welded vinyl frames and flanged nail-fin options match the non-standard rough openings and thin-wall construction we see out here. We stock common parts locally for faster turnaround, and if you want to see side-by-side quotes on paper, we’ll bring them. You should know exactly what you’re buying before you sign.
Common Window Replacement Problems We See in Wedgefield Homes
- Hidden rot at the sill. Older manufactured-home windows in Wedgefield were often set with caulk only, no exterior flashing. When the seal fails, moisture wicks into the particleboard rim joist and rots it from the inside. The window looks fine until you pull it out.
- Sashes out of square from pier settlement. Rural pier foundations settle unevenly over decades. Casements and double-hungs start to bind, then stop locking. Replacing the window without checking the frame means you’ll have the same problem again in a few years.
- Condensation and mold in thin wall cavities. Spray foam and fiberglass batts trap moisture against vinyl frames in mobile-home walls. By the time you see mold on the interior trim, the frame behind it has been wet for years. Full frame replacement is usually the fix.
- Fogged insulated glass units. The 1970s-1990s manufactured homes across Wedgefield came with early IGUs that fail after 20-30 years. Once the seal goes, the argon escapes and the view goes permanently hazy. On a lot off Wythea Drive, our crew replaced three single-hung windows in a 1980s mobile home where every insulated glass unit had fogged. We pulled the flanged nail-fin frames and found the original flashing tape had dried to dust along the sills, letting moisture wick into the particleboard rim. We installed fusion-welded vinyl sliders with low-E glass and argon fill sized to the exact rough openings, then retaped the flanges with butyl-backed flashing tape and re-set the interior trim over new jamb extensions.
Pricing for Window Replacement in Wedgefield, FL
Window replacement in Wedgefield runs $480-$2,400 per opening. The spread comes down to three things: whether you’re doing an insert or a full-frame job, whether the home is manufactured or site-built, and whether we find hidden rot or settlement damage once the old window comes out. Here’s a breakdown of typical ranges for our services:
| Service | Typical Range in Wedgefield |
|---|---|
| Insert Window Replacement | $480-$1,100 per opening |
| Full Frame Replacement | $650-$2,400 per opening |
| Storm Window Replacement | $550-$1,600 per opening |
| Energy-Efficient Upgrade (low-E + argon) | Adds $90-$210 per window |
We don’t give a lowball number to get the job and then pad the invoice. Every quote includes written allowances for what opening up a Wedgefield wall typically turns up: rotted sill plates, party board that’s seen moisture, undersized framing that needs reinforcement. If we find something outside the allowance, we stop, show you photos, and get written approval before we spend another dollar. Call (813) 320-9346 for a free estimate. Seniors and veterans get a permanent 5% discount on every job.
We Also Serve Cities Near Wedgefield
TruePane covers Wedgefield and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those areas, our crews can typically reach you on the same schedule. For a full overview of what we do and where we work, see Window Replacement in Wedgefield or the main Window Replacement service page for details.
Serving Wedgefield, FL - Our Local Coverage Area
We’re based in the Wedgefield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Wedgefield
A quote goes up after tear-out because we found damage we could not see from the outside: rotted rim joists, particleboard sills that disintegrated from decades of moisture, or framing that was under-built for the window size. What actually changes on a Wedgefield window replacement quote once a manufactured-home wall is opened is that the hidden conditions are now visible, and we write them into the contract as fixed allowances before we start. The number we give you is the number you pay, and any surprise gets priced and approved in writing before we touch it. Call (813) 320-9346 for an exact quote, estimates are free.
Yes. Manufactured-home windows in Wedgefield require flanged or nail-fin windows engineered for thin-wall aluminum framing, and they need butyl-backed flashing tape at the sill and flanges because the original installs often used only caulk, which fails over time. Site-built homes have thicker wall assemblies and more room for standard flashing. If you’re replacing windows in a manufactured home, hire a crew that knows the difference. Call (813) 320-9346 to schedule a free estimate.
Many Wedgefield lots sit in or near AE and X500 flood zones, and Orange County’s floodplain management ordinance requires that door, window, and glass railing system installations at or near base flood elevation account for flood-vent and seal requirements. That’s a code detail most window crews working the newer subdivisions west of here have never encountered. We pull permits when needed and make sure the work passes inspection. Call (813) 320-9346 to talk through your parcel’s specific requirements.
Yes, you can usually switch window styles in a manufactured home, but you’ll need a full frame replacement rather than an insert, because the rough opening framing has to be modified to fit the new operational sash. Non-standard rough openings like 74″ x 46″ or 72″ x 48″ often require custom-sized units. We’ll measure your exact opening and give you side-by-side quotes for what fits. Call (813) 320-9346 for a free estimate.
Yes, low-E glass and argon fill are worth the extra $90-$210 per window in Wedgefield. The low-E coating reflects radiant heat, and the argon fill reduces condensation against the frame, which is the root cause of mold growth inside thin manufactured-home wall cavities. In our climate, the upgrade typically pays for itself through lower cooling bills and fewer moisture problems within a few years. Call (813) 320-9346 to get side-by-side pricing for standard and upgraded glass.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wedgefield and the surrounding communities. Dale founded the company in 2008 on the rule that if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.