Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Andersen Windows & Doors in Golf, FL | TruePane Windows & Doors
We provide independent Andersen Window Installation - Golf and door service throughout Golf, Florida. We’re not a factory-authorized shop, and we’ll tell you that straight because it matters more than it sounds. What we are is a crew that has spent years working on Andersen’s mid-century to early-1980s product lines in Palm Beach County custom homes, which is almost every house in this village. If you have an original Narroline double-hung with fogged glass or a Perma-Shield casement with pitted cladding, call (813) 320-9346 and we’ll come take a look.
Why Golf Residents Choose Us for Andersen Service
Most window companies in Palm Beach County know tract housing. Golf doesn’t have tract housing. Every job here is a bespoke retrofit on a high-value property where the original Andersen windows were likely installed when the house was built, and the homeowner has lived with them for thirty or forty years. That’s a different kind of conversation. Dale Kessler, our owner, grew up in Seminole Heights and learned the glazing trade at Hillsborough Community College’s construction technology program, spending more time on the shop floor than in a classroom, which suited him fine. He’s been measuring, setting, and sealing windows across Florida for the better part of two decades, and the work he’s best known for is storm-rated installation done tight enough that a follow-up inspection is never a surprise. When we work on Andersen windows in Golf, we treat the opening as if it’s the only one on the house, because in this village, it effectively is.
Common Andersen Windows & Doors Problems We Solve in Golf
- Salt-air oxidation on aluminum-clad Perma-Shield frames. Golf sits a few miles from the Intracoastal and the Atlantic, and the salt-laden air finds its way into every elevation that faces the water. The cladding pits and swells within five to seven years on ocean-facing sides, and the fix requires knowing whether the frame underneath is still sound or whether the oxidation has compromised the weather barrier.
- Failed insulated glass units in original Narroline sashes. Interior fogging from seal failure is common in Golf’s 1970s homes. Once the seal goes, the argon or krypton fill is gone, and the window becomes a condensation magnet. On a Narroline, a quality aftermarket sash kit is often the better call than chasing discontinued parts.
- Warped or sticking Frenchwood hinged patio door panels. Decades of humidity and daily sun-load have a way of bending door panels just enough that they no longer meet current impact-zone deflection limits. It’s not cosmetic. It’s a code issue that compounds in the hurricane exposure zone.
- Rotted wood sills on non-clad 400 Series units. Golf’s large lots mean sprinkler systems run close to the house, and when overspray wets the bottom rail of a wood Andersen window repeatedly, you get rot. The repair is straightforward if caught early, but a full replacement is often needed if the rot reached the rough opening.
- Hardware fatigue on original Andersen operator cranks and balances. The salt air works on hardware too. Balances lose tension, crank gears strip, and the window that opened fine for forty years suddenly won’t hold position. We stock common Andersen replacement hardware and can source discontinued pieces faster than most shops in the county.
Andersen Service in Golf: What Local Conditions Mean for Your Equipment
Golf is an incorporated village with only a handful of streets and roughly 250 residents. That means every permitted Andersen window replacement on Golf Road or Country Club Drive is visible to the entire village within a day. We’ve learned this the hands-on way. Our crew routinely photographs and documents every anchoring screw count and impact-glass label before the inspector arrives, because a single non-compliant mullion on one window triggers a block-wide re-inspection rumor that no one wants to be part of. The village’s permit activity sits under a microscope in a way it doesn’t in larger neighboring cities. Homeowners in Golf read their code notices, and their neighbors read them too. That’s why our documentation standard here is higher than anywhere else we work. If it needs to be in writing to be true, we will put it in writing. Every Andersen job we do in Golf gets a written line-item quote, a written warranty registration for both manufacturer layers, and a written record of the anchoring and glazing details, because we know the inspector will ask, and the neighbor will too.
Andersen Models & Products We Service in Golf
We service the Andersen lines that actually show up on Golf’s mid-century and early-1980s custom homes. That includes the original Narroline double-hungs, Perma-Shield casements, Frenchwood hinged patio doors, and 400 Series awnings. We start with genuine Andersen replacement parts where they make sense: balances, sashes, weatherstripping, operator hardware. But for older discontinued lines like Narroline, a quality aftermarket sash kit or full insert replacement is often safer than chasing NOS parts that may not exist. If the frame is sound, we repair. If the opening needs impact glazing and the existing frame can’t accept it, we recommend full-frame replacement and tell you why. Our Andersen sales & service team can walk you through the difference over the phone.
Andersen Service Pricing in Golf
Andersen window and door service in Golf typically runs $180 to $340 for common repairs like sash replacements, weatherstripping, and operator hardware swaps, while full-frame impact-rated replacements run higher due to the bespoke nature of every opening here. What drives the cost in Golf specifically is the age of the original Andersen product, whether the frame is sound enough for an insert or needs full replacement, and whether the elevation faces the water and requires heavier impact glazing. When you call for a free estimate, we measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway. Call (813) 320-9346 for an exact quote, and we’ll walk you through what your specific house needs.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Golf
In most cases, we can replace just the sash or the insulated glass unit if the original Narroline frame is still square and the wood hasn’t rotted. But if you’re in an impact-zone elevation where the existing frame can’t accept current impact glazing, a full insert or full-frame replacement is the code-compliant path. We’ll show you the difference on paper before you commit.
No, and we wouldn’t suggest trying. Golf’s permit process is unusually visible, and the village inspector knows exactly what to look for. We document every anchoring screw count, impact-glass label, and mullion detail before inspection and provide the paperwork to go with it. Call (813) 320-9346 and we’ll walk you through what the village requires.
If the panel is still true and the frame is sound, we can rebuild the door with a new impact-rated hinged panel and stainless hardware as part of our Door Installation - Golf service. If the panel has warped beyond deflection limits or the frame has hidden rot, full replacement is the honest answer. In Golf’s climate, doors that have been binding in July for a decade usually need more than a hinge adjustment.
Golf is a 250-person village where nearly every home is a custom build from the 1960s to 1980s, and there is no tract housing to speak of. That means every Andersen project is architecturally specific, and the permit activity is visible to the entire village. In Boynton or Delray, a window company can do a dozen similar jobs in a week. In Golf, every opening is its own project. That’s why our documentation and pre-inspection standard here is different. Our Golf service area page has more detail on how that shapes our work.
Yes, we can match the original dark bronze finish when we replace or re-clad the affected sections. The salt pitting itself is often a sign the cladding has done its job and is ready to be replaced. We preserve the original brick-mold opening wherever possible and match the finish so the elevation looks continuous. Call (813) 320-9346 for a free estimate on the scope.
Service Areas Near Golf
In addition to Golf, we serve nearby Palm Beach County communities including Boynton Beach, Delray Beach, Lake Worth, and the smaller pockets around the Country Club of the Palm Beaches. If you’re in Andersen service in Greenacres or Andersen service in Groveland, the same crew covers those areas with the same documentation standard.
Book Your Andersen Service in Golf Today
If you have Andersen windows or doors in Golf that need attention, call (813) 320-9346. We’ll schedule your free estimate, measure every opening twice, and put the quote in writing before any work begins. Same-day availability is possible for smaller repairs, and a real person answers the phone whenever you call.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After