Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Windows & Doors in Lake Park, FL | TruePane Windows & Doors
We provide independent Andersen windows and doors service across Lake Park, Florida. We are not an Andersen factory branch or authorized dealer, and we don’t pretend to be. What we are is the crew that works on the original Narroline double-hungs, Perma-Shield casements, and Frenchwood patio doors that Lake Park’s 1950s-to-1970s CBS homes still carry, and we know what the salt air off Lake Worth Lagoon does to them. Call us at (813) 320-9346 and we’ll tell you, in plain terms, whether your Andersen unit is worth repairing or should be replaced with impact glass.
Why Lake Park Residents Choose Us for Andersen Service
Dale Kessler grew up in Seminole Heights and picked up the glazing trade at Hillsborough Community College, spending more time on the shop floor than in a classroom seat, which suited him fine. For the better part of two decades he has measured, set, and sealed windows and doors across the Tampa Bay area, and the work he is best known for is storm-rated installation done tight enough that a follow-up inspection is never a surprise. That same standard applies to every Andersen window or door we touch in Palm Beach County. We use factory-sourced Andersen weatherstripping, balances, and hardware whenever those parts are still in production. When a part was discontinued thirty years ago, we say so plainly and price both options: the verified-equivalent aftermarket fix or the full replacement. Most Lake Park homes we visit still have their original 1960s and 1970s windows, meaning this is not our first time pulling a corroded Narroline sash or a Frenchwood door that has bound against a settled CBS rough opening.
Common Andersen Windows & Doors Problems We Solve in Lake Park
- Corroded aluminum cladding on pre-1990s Andersen Narroline double-hungs. Lake Park’s position on the Lake Worth Lagoon means heavier salt-spray exposure than towns just a few miles inland. The bottom sash of a 1960s or 1970s Narroline sits in standing water after every rain, and the cladding turns chalky, pits, and eventually crumbles. We see this daily.
- Fogged insulated glass on 1980s and 1990s Andersen units. West- and lagoon-facing elevations in Lake Park get thermal cycling from morning shade to full afternoon sun, and the desiccant inside those older sealed units eventually surrenders. The window fogs, and no amount of cleaning fixes it. We replace the glass or the sash, whichever makes more sense for the age of the unit.
- Binding Frenchwood hinged patio doors on settled CBS homes. Lake Park’s older concrete-block houses shift over the decades, and a Frenchwood door that no longer closes square will eventually wear down the multipoint lock until the door won’t latch at all. We re-square, re-hang, or replace, depending on how far the rough opening has moved.
- Worn internal balances and jamb liners on Narroline double-hungs. Sashes that drop or won’t stay open are common on the 1970s and 1980s Narroline windows throughout Lake Park. The salt-laden air causes the vinyl jamb liner tracks to swell and bind, which accelerates the wear. We stock factory-sourced balances for most Narroline generations.
- Perma-Shield casement hardware failure near the Lagoon. The crank mechanisms and hinges on older Perma-Shield casements take a beating from coastal humidity and salt spray. We replace worn operators and hinge arms with Andersen factory hardware when available, because the aftermarket kits rarely hold up.
Andersen Service in Lake Park: What Local Conditions Mean for Your Equipment
Lake Park is one of the few municipalities in Palm Beach County where the entire town of roughly 6,000 residents sits inside the wind-borne debris region. That is not a technicality; it is the governing fact of every window or door job we do here. And because there are no high-rise condos, nearly every Andersen replacement in Lake Park is a single-family home with an original CBS rough opening that has to be custom-measured for impact glass. You cannot pull an off-the-shelf Andersen impact window for the 1950s jalousie openings that dominate this town’s original housing stock. On Park Avenue just west of the railroad tracks, our tech opened up a 1962 original Andersen Narroline double-hung that had been painted shut after the bottom sash lost its balance. The aluminum cladding on the sill was so salt-corroded it crumbled when we removed the sash. We custom-fitted a full-frame impact-rated replacement that matched the original sightlines, brought the opening up to Palm Beach County wind code, and kept that homeowner from reframing the rough opening under a structural header. That is what local Andersen service looks like in Lake Park.
Andersen Models & Products We Service in Lake Park
We service every common Andersen line found in Lake Park’s postwar housing: Narroline double-hung windows from the 1960s through 1980s, Perma-Shield casements and awnings, Frenchwood hinged patio doors, and 400 Series gliding patio doors. For parts, we use factory-sourced Andersen weatherstripping, balances, and hardware whenever they are still in production. The aftermarket kits rarely match the exact jamb dimensions on older Narroline and Perma-Shield units, so we don’t use them unless the factory part is gone and a verified-equivalent exists. Our Andersen sales & service work covers everything from a single sash balance replacement to a full-house impact conversion. If the unit has already lost its seal or cladding, we tell you that too, and we’ll quote the replacement side by side with the repair so you can see the numbers yourself.
Andersen Service Pricing in Lake Park
Repair work on Andersen windows and doors in Lake Park typically runs between $180 and $600 per unit, depending on what’s failed. Full impact-rated replacements on the original jalousie and single-pane openings in this town usually land between $900 and $1,800 per opening, including the structural header evaluation most CBS homes need. Every quote is itemized on paper, with both manufacturer warranty layers registered in writing before the truck leaves your driveway, and our 90-Day Done Right Promise behind the work. If the pane is not true, the job is not done. Call (813) 320-9346 to schedule your free estimate, and we’ll measure twice before we give you a number.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Lake Park
Yes, in most cases. Because all of Lake Park sits inside Palm Beach County’s wind-borne debris region, any permitted window work requires that the opening be brought up to current impact-rated glazing or shutter code. A reputable contractor won’t let you pull a permit for one window and leave it non-compliant. That said, we regularly replace a single failed Narroline with a custom-sized impact unit that matches the original sightlines, so the upgrade is contained to just that opening. Call (813) 320-9346 and we’ll walk you through what code requires on your specific house.
That white chalky corrosion is oxidation from years of direct salt-spray exposure off the Lagoon, and it accelerates faster here than almost anywhere else in the county. Once pinholes start, the cladding is failing and water gets behind it into the wood frame. We can replace the sash in some cases, but if the frame itself has pitting, the honest answer is usually replacement. The good news is that the replacement won’t fight the same battle if it’s impact-rated and properly sealed for the coastal zone.
If the sash and balances are still sound, we can replace the insulated glass unit and keep the original sash. That’s often the smartest fix on a 1980s Narroline whose desiccant has failed. But if the cladding is also corroded or the sash itself has started to rot at the corners, the sash replacement is the better value. We’ll tell you which applies and quote both. Call (813) 320-9346 and we’ll take a look.
It is common, because the concrete-block rough openings in Lake Park’s older houses settle and shift over the decades. A Frenchwood door that was installed square in 1975 may now be half an inch out across the diagonal. We can often re-square the door and re-time the lock without replacing it, but if the slab itself has warped from humidity and salt, replacement is the better call. We’ll show you the measurements and let you decide.
The original louvered jalousie windows on Lake Park’s postwar homes are not hurricane-rated and cannot be brought up to code with repairs. When you pull a permit for any window work, the inspector will require those openings to come up to current wind code. We custom-fit impact-rated Andersen 400 Series or a comparable manufacturer line into those rough openings, with full-frame replacement and structural header work where the original framing is undersized. Call (813) 320-9346 for a free measure and a real number.
Service Areas Near Lake Park
In addition to our work throughout Lake Park service area, we cover the neighboring coastal communities of Palm Beach County. We regularly provide Andersen service in Lake Worth Beach, just south of Lake Park across the C-51 canal. We also handle Andersen service in Lantana for homeowners dealing with the same salt-air and impact-code conditions.
Book Your Andersen Service in Lake Park Today
Call (813) 320-9346 to schedule your free estimate. A live person answers the phone, and we’ll set a time that works for you. We walk the openings, measure twice, and put the quote on paper with both warranty layers registered in writing before the truck leaves. If it needs to be in writing to be true, we will put it in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park, FL and the surrounding coastal communities since 2008 with years of community service behind the company.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.