Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Coral Springs, FL | TruePane Windows & Doors
We provide independent PGT window and door service across Coral Springs, from single-panel glass replacement to full jalousie-to-impact conversions on original CBS tract homes. The work we do most often here involves PGT WinGuard and ClassicVue units failing in ways that block wind-mitigation discounts or draw insurance cancelation notices. We’re not a franchise and not manufacturer-affiliated. We just know these windows and this city. Call (813) 320-9346 for a straight answer.
Why Coral Springs Residents Choose Us for PGT Service
Dale Kessler founded TruePane out of a simple frustration: he kept walking into homes where a good window had been ruined by a sloppy install or an unregistered warranty. He spent two decades learning the glazing trade across Florida, and the lesson stuck. We come to a PGT service in Margate or anywhere nearby the way a second-generation glazier should: measure twice, quote on paper, register every warranty layer in writing before the truck leaves. That’s The Keystone Standard and it applies to every repair, replacement, and conversion we do in Coral Springs.
Our techs are trained on the specific failure patterns PGT aluminum and vinyl frames develop in Coral Springs’ high-humidity, high-UV environment. We’ve seen the oxidation pitting on ClassicVue frames from lawn irrigation overspray in The Hills. We’ve pulled organic debris out of WinGuard weep holes blocked by coral rock landscaping in Cypress Run. This is not generic window service. Every call is grounded in what actually happens to PGT equipment in this city. We also do PGT sales & service for homeowners weighing repair against replacement, and we’ll show you both options side by side on paper.
Common PGT Windows & Doors Problems We Solve in Coral Springs
- Fogged PGT PremierVue sliders. South Florida’s year-round humidity and the brutal UV load on south-facing walls push IGU seals past their limit. We see it constantly in original 1980s and 1990s PremierVue units across Coral Springs, where the glass shows condensation between panes that will not wipe off.
- Aluminum frame oxidation on ClassicVue windows. Constant lawn irrigation overspray, especially near sprinkler heads set close to the house, causes pitting and white corrosion bloom on older PGT ClassicVue frames. Once the anodized surface breaks down, water gets behind the glazing channels and the window starts leaking at the corners.
- Water intrusion in WinGuard tracks. Coral rock landscaping holds organic matter that finds its way into PGT WinGuard track weep holes. When those clog, the track holds water after every thunderstorm and you’ll see staining on the interior sill or feel a soft spot in the drywall below the window.
- Binding rollers on original PGT sliding glass doors. Homes built in the 1970s subdivisions, like the eastern sections of Coral Springs, sit on concrete slabs that settle over time. The slab shifts just enough to put the door header out of parallel, and the PGT door rides hard against the lower track until the rollers chew themselves up.
- Non-impact jalousie windows blocking insurance discounts. This is the one that catches Coral Springs homeowners by surprise. A single original jalousie panel on a utility room or breezeway can invalidate an entire wind-mitigation discount, even if every other opening in the house is impact-rated. We convert those openings with PGT WinGuard fixed units and the inspector signs off.
PGT Service in Coral Springs: What Local Conditions Mean for Your Equipment
Coral Springs is a master-planned city built almost entirely between the late 1960s and 1990s, which means the overwhelming majority of its single-family homes predate Florida’s post-Hurricane Andrew impact-window mandates. Yet the entire city sits inside Broward County’s High Velocity Hurricane Zone, the most stringent product-approval regime in the country. That gap, homes built before impact codes but inspected under impact-code rules, is the defining tension for PGT owners here. The practical effect is that insurance adjusters and wind-mitigation inspectors working older western subdivisions routinely flag original jalousie windows on utility rooms and breezeways as uninsurable openings. Many homeowners don’t realize one non-impact jalousie panel can erase the wind-mitigation discount for the whole house. So a $400 secondary window becomes the trigger for a much larger conversation about which openings actually need full replacement, and which can be brought into compliance with a targeted conversion.
PGT Models & Products We Service in Coral Springs
We service the full PGT residential range: WinGuard impact windows and doors, PremierVue sliding glass doors and windows, ClassicVue single-hung and fixed units, and Eze-Breeze porch enclosure systems. For a repair on an out-of-warranty PGT unit, we’ll quote you an OEM PGT part when structural integrity or NOA compliance is at stake. When the component is cosmetic, a handle, a latch, a screen frame, we fit high-grade aftermarket replacements that match the original spec and cost less. For Coral Springs homes with original 1970s and 1980s PGT units showing two or three failure modes at once, we often recommend full-frame replacement rather than another round of repairs. It’s the honest call and it usually saves money over two more service visits.
PGT Service Pricing in Coral Springs
PGT service in Coral Springs is priced by the job, not by the hour for most calls. A simple PGT window glass replacement with a single IGU typically runs from $300 to $650 depending on the unit size and whether it’s impact-rated. Weep hole cleaning and track reconditioning on a PGT sliding glass door is commonly $150 to $300. A full jalousie-to-impact conversion on a single utility-room opening, with a custom-sized PGT WinGuard fixed unit and proper flashing, runs from $800 to $1,400 depending on the opening. A complete PGT impact replacement package for a typical Coral Springs home can range from $15,000 to $30,000 depending on the number of openings and the frame style. Every estimate is a free, written, line-item quote. We don’t change the number after the fact and we don’t leave you guessing what a line item means. Call (813) 320-9346 and we’ll walk the property with you.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well, and we also handle PGT in Coconut Creek. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Coral Springs
No, not in Broward County. A sliding glass door frame from the 1980s or 1990s is not designed or approved to carry the weight and wind load of impact-rated glass. The HVHZ code requires that the entire assembly, frame and glass together, carry a Miami-Dade Notice of Acceptance or current Florida Product Approval. You can’t mix a new impact IGU with an old non-impact frame and expect an inspector to sign off. Call (813) 320-9346 and we’ll tell you if your frame has any repair-life left or if replacement is the only honest option.
Wind-mitigation inspections in Coral Springs evaluate the entire exterior envelope, including secondary openings. A jalousie window is a louvers-and-glass-panel design with no impact rating and no modern structural glazing. The inspection form treats any single non-compliant opening as a failure of the protected-opening credit. That one jalousie on your breezeway resets the whole discount calculation to the baseline. It’s an all-or-nothing standard, and it surprises a lot of homeowners in Coral Springs. Converting that opening to a PGT WinGuard fixed unit is usually a one-day job. Call (813) 320-9346 for an exact quote, estimates are free.
Either a Miami-Dade Notice of Acceptance or a current Florida Product Approval is accepted in Broward County, including in Coral Springs. The key is that the documentation must list the exact product, the exact size range, and the exact glass type being installed. A PGT WinGuard window with a Florida Product Approval number is code-compliant here. A PGT window where the approval document was for a different size or a different glass package is not. We verify the approval paperwork before installation and we put a copy in your hand. That’s the Keystone Standard and it’s not optional.
Typically four to eight weeks from the date we take final measurements until the windows arrive in Coral Springs and we schedule installation. PGT builds WinGuard units to order in custom sizes because older CBS tract home openings vary from code-minimum dimensions. If you need a utility-room jalousie conversion, we can often pull standard-size PGT WinGuard fixed units from our suppliers faster. The best way to know is a measure. Call (813) 320-9346 and we’ll give you a real timeline in writing.
Yes. We service PGT windows and doors regardless of who originally sold or installed them. Being an independent provider means we don’t answer to a dealer network, and we don’t route you back to a manufacturer hotline, whether you need Plantation PGT service or help in Coral Springs. When a PGT unit is out of warranty, we can use OEM PGT replacement parts where structural integrity or NOA compliance depends on it, and high-grade aftermarket components for cosmetic items like handles and rollers. If it needs to be in writing to be true, we will put it in writing. Call (813) 320-9346 and tell us what you’re seeing.
Service Areas Near Coral Springs
We work throughout Broward County and the broader region. You’ll find us in the neighborhoods around Coral Springs and in surrounding communities like Coral Springs service area, plus we handle PGT work in PGT service in Cutler Bay and PGT service in Dade City. If you’re on the edge of the city or just outside the lines, call us. We’ll tell you honestly whether we can get a crew to you.
Book Your PGT Service in Coral Springs Today
If you’re chasing a wind-mitigation discount, dealing with a fogged PGT slider, or just want a straight answer on your windows, call (813) 320-9346. A live person answers, day or night. We’ll schedule your free estimate and show up when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.