Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Pinellas Park, FL | TruePane Windows & Doors
We provide independent PGT window and door service across Pinellas Park, from the manufactured home parks off 62nd Ave N to the 1950s block homes near Park Boulevard. What makes our PGT work different here is simple: we deal with HUD-code rough openings and dual-salt-air corrosion every week, so we order what actually fits and we repair what’s actually failing. Call (813) 320-9346 for a straight answer and a free estimate.
Why Pinellas Park Residents Choose Us for PGT Service
PGT windows and doors are built in Florida for Florida, but the way they age in Pinellas Park is its own thing. Salt air off Tampa Bay and the Gulf works on aluminum frames faster here than a few miles inland, and the older manufactured home stock brings rough-opening sizes that send big-box contractors back to their trucks scratching their heads. Dale Kessler grew up in Seminole Heights and has been measuring, setting, and sealing windows across the Tampa Bay area, including our PGT service in Seminole, for the better part of two decades. His crews work on PGT WinGuard and SpectraGuard units in Pinellas Park every week. We know which PGT parts hold up, which ones oxidize early, and which replacement path makes financial sense for a 55-plus homeowner who plans to stay put. And we show up in uniform, background-checked, with a live person answering the phone 24/7.
Common PGT Windows & Doors Problems We Solve in Pinellas Park
- Oxidation bloom on PGT aluminum frames. It’s not a cosmetic issue. Salt-laden air from Tampa Bay and the Gulf causes powder coat to chalk and pit within 8 to 12 years in Pinellas Park, compared to 15-plus inland. We see it on SpectraGuard frames even several miles from open water. Pitted aluminum is structural, not just ugly.
- Sill pan failure on WinGuard impact units in older CBS homes. 1950s through 1970s block homes around Pinellas Park often have no flashing behind the original stucco reveals. Water wicks behind the PGT frame, rots the buck, and leaks into the interior during those summer afternoon downpours. We re-flash the sill, not just caulk the outside.
- Out-of-square rough openings in manufactured homes. The original 1960s and 70s units in Pinellas Park’s 55-plus parks were built around 30-inch-wide jalousie windows. That size does not exist in current PGT catalog stock. When a contractor tries to force a stock unit in, the sash binds. We custom-order from PGT and re-square the buck before the window goes in.
- Slider door rollers failing at the bottom track. HUD-code manufactured homes settle. The floor system shifts, the door track goes out of level, and PGT slider rollers start to telescope or bow. We shim, realign, or bolt through the floor joists to get the door sliding true again.
- Impact rating compromised by aftermarket parts. A no-name sash lock or keeper that “sort of fits” often has a different screw pattern. On a PGT WinGuard unit, that can void the impact rating. We default to PGT OEM hardware because the glass is only as strong as the hardware holding it in place.
PGT Service in Pinellas Park: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic PGT page. Pinellas Park has one of the highest concentrations of HUD-code manufactured home communities in Pinellas County. That means a large share of PGT replacement work in this city involves 1960s and 70s units with rough openings sized for 30-inch-wide jalousie windows. Big-box suppliers do not stock that size. Contractors who do not know Pinellas Park discover this on site, after the old window is out, and the homeowner waits weeks for a special order. Our crews pre-order from PGT’s factory before the job starts, so the timeline stays honest. In the Skyview Terrace 55-plus park off 62nd Ave N, our tech replaced a corroded PGT SpectraGuard single-hung where the original 30-inch rough opening was out of square by a quarter inch and the aluminum frame had white oxidation blooms on the seaward side. We re-squared the buck, installed a custom-ordered PGT WinGuard vinyl insert with stainless anchor bolts, and re-flashed the sill pan to stop the leak that had been rotting the interior drywall. That is Pinellas Park PGT work. It is not the same as a site-built St. Pete replacement.
PGT Models & Products We Service in Pinellas Park
We service the PGT lines actually found in Pinellas Park homes, not the catalog list a marketing team put together. PGT WinGuard Vinyl, impact-rated and common in site-built CBS replacements. PGT SpectraGuard, the impact-rated aluminum line seen on 1990s and 2000s replacements. PGT 7700 and 5580 series single-hung sliders, the legacy non-impact aluminum units still in plenty of original-condition block homes. And PGT 2200 and 2300 series sliding glass doors, found in older manufactured homes. We default to PGT OEM hardware – sash locks, keepers, rollers, weatherstripping – because aftermarket parts often carry different screw patterns that compromise the impact rating. We will repair a PGT unit if the frame is sound and the glass is intact. When corrosion has pitted the aluminum or the seal has failed, full replacement is usually the cheaper path than a rebuild. For PGT sales & service, we quote manufacturer lines side by side on paper so you see exactly what you are buying.
PGT Service Pricing in Pinellas Park
PGT service pricing in Pinellas Park follows the work itself, not a flat fee chart. A simple hardware replacement – a sash lock, keeper, or roller set on a PGT slider – typically lands between $95 and $250 including the OEM part. Weatherstripping or a minor re-alignment on a single unit runs $120 to $300 depending on access and the condition of the frame. When a sill pan needs re-flashing or a buck needs re-squaring, labor drives the number up – that is typically $350 to $700 per opening because it is real structural work, not a caulk and done. Full replacement of a PGT unit in a Pinellas Park manufactured home, custom-ordered and installed, starts around $900 and goes up based on impact rating and glass package. Every estimate is free, written, and line-itemed. If it needs to be in writing to be true, we will put it in writing. Call (813) 320-9346 for an exact number on your job.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well, with PGT repair in Clearwater also in our coverage area. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Pinellas Park
The rough openings in a HUD-code manufactured home are not the same as site-built framing. Original 30-inch jalousie openings, common in Pinellas Park’s older 55-plus parks, fall between current PGT catalog sizes, so the units must be custom-ordered from the factory and the buck often needs re-squaring. A site-built home in Disston Heights, our Largo PGT service area, or St. Pete usually accepts a stock PGT WinGuard insert. The permit path is also different, and we handle it either way. Call (813) 320-9346 and we will tell you what your home actually needs.
Yes, if you are pulling a permit. Pinellas County’s Florida Building Code wind-speed requirements, roughly 130 mph design wind, make impact-rated or product-approved windows effectively mandatory for any permitted replacement in Pinellas Park, not just waterfront homes. Non-impact PGT legacy units can sometimes be repaired, but a permitted replacement means an impact product. We walk you through the code requirement on the first visit. For a precise answer on your specific opening, call (813) 320-9346.
Pinellas Park sits mid-peninsula, so it receives salt aerosol from both Tampa Bay to the east and the Gulf to the west. That dual exposure accelerates oxidation and pitting of aluminum frames, even several miles from open water. We see PGT SpectraGuard powder coat chalk and pit in 8 to 12 years here versus 15-plus in inland Hillsborough. Frame pitting is structural once it starts, not just a finish issue. Call (813) 320-9346 and we will tell you whether your frames are still sound or ready for replacement.
If the frame is sound and the glass is intact, we repair. Sash locks, keepers, rollers, weatherstripping – those are repair items. But when the aluminum has pitted from decades of Pinellas Park salt air, or the seal between the panes has failed, replacement is usually cheaper than a rebuild. We will show you the frame condition and let you decide with a written line-item quote. Estimates are free – call (813) 320-9346.
The original floor system in a HUD-code manufactured home settles over time. As the floor settles, the door track goes out of level, and the PGT slider rollers start telescoping, bowing, or binding. In a site-built home the slab keeps the track level for decades. In a Pinellas Park manufactured home park, that track is sitting on wooden floor joists that move. We shim, realign, or bolt through the floor joists to restore a true track. Call (813) 320-9346 for a free assessment before the door gets worse.
Service Areas Near Pinellas Park
TruePane serves Pinellas Park and the surrounding communities, including Acacia Villas, Apollo Beach, Anna Maria, Altoona, and Alafaya. If you are a few miles out and need PGT service, call us and we will tell you straight whether we cover your street. We are also the team for Pinellas Park service area calls on PGT and other manufacturer lines. For PGT work further east, see our PGT service in Plantation page or PGT service in Plant City page.
Book Your PGT Service in Pinellas Park Today
Call (813) 320-9346 for a free PGT estimate in Pinellas Park. A live person answers, 24/7. We will measure twice, quote on paper, and register both warranty layers before the truck leaves the driveway. Done right, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinellas Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.