PGT Windows & Doors in Tequesta, FL

PGT Windows & Doors in Tequesta, FL | TruePane Windows & Doors

We’re an independent PGT service provider handling repair and replacement work on PGT windows and doors across Tequesta, including our Window Installation in Tequesta. We’re not factory-authorized, which lets us be straight about what fails and what’s worth fixing rather than what’s worth selling. If you own PGT products in Tequesta, the one thing that sets our work apart is that we know exactly what three-sided salt water does to these specific frames and rollers, and we register every repair in writing through the Village’s own permit process. Call (813) 320-9346 for a free estimate.

Call (813) 320-9346

Why Tequesta Residents Choose Us for PGT Service

Our crews have been working on PGT sales & service calls since the early WinGuard impact-line era, back when the aluminum frames were still a new answer to South Florida’s wind codes. We have pulled apart enough PGT sashes in Tequesta to know which sealant holds the sill track and which one turns to chalk after three summers of Intracoastal spray. Dale Kessler founded TruePane in 2008 after years of watching out-of-true installs and voided warranties pass for finished work, and the rule he keeps on the whiteboard has not changed: if the pane is not true, the job is not done.

We handle PGT repair with OEM replacement hardware whenever the original series is still in production. When a frame is too far gone for new parts to matter, we say so and show you the marine-grade aftermarket option on paper next to a replacement quote, side by side. That’s the kind of square deal the readers of this page tend to remember.

Common PGT Windows & Doors Problems We Solve in Tequesta

• Salt-air galvanic corrosion on WinGuard aluminum frames. Within five to seven years on canal-front or Intracoastal-side homes, the sill track and screw bosses start swelling with white corrosion where the aluminum meets stainless hardware. It starts as a stiff slider and ends as a locked panel if left alone.
• Hardened and cracked Eze-Breeze vinyl slide tracks. Direct sun and salt spray bake the vinyl track on Eze-Breeze sliders until it fractures. The sash pops out of the lower track, or binds mid-glide. We stock replacement track segments for the common Eze-Breeze sizes in Tequesta.
• Fused stainless steel rollers on PGT sliding glass doors. Salt-laden moisture works into the roller housing and locks the wheel solid. The door won’t move without lifting it. This is the most common PGT patio door repair we see within two blocks of the Loxahatchee River.
• Warped or sagging PGT impact door panels on second-floor additions. Many Tequesta CBS ranches got second-story additions over the years, and the original rough openings were never reshimmed for the heavier impact-rated sash that went in later. The panel sags, the latch misses, and the reveal is uneven.
• Failed weatherstripping and worn interlock seals on WinGuard impact sashes. Salt air dries out the wool pile and bulb seals on WinGuard units faster than inland. You’ll feel the draft in January, and you’ll see daylight through the meeting rail in the late afternoon.

PGT Service in Tequesta: What Local Conditions Mean for Your Equipment

Tequesta sits on a narrow peninsula with the Loxahatchee River on one side, the Intracoastal on the other, and the Atlantic just beyond Jupiter Inlet. That means your PGT windows and doors get bi-directional salt-air exposure, which is measurably worse than what you’d see in Jupiter or Palm Beach Gardens a few miles inland. We see it most clearly on Country Club Drive, where homes from the 1960s and 1970s CBS ranch era still carry original WinGuard aluminum frames. The frames on the water side corrode at the sill track and screw bosses, while the street side stays comparatively clean. One tech on our crew pulled two WinGuard impact sliders from a 1970s CBS ranch on Country Club Drive last spring because both bottom tracks had swollen with white corrosion from the Intracoastal side, and the original PGT roller assemblies were fused solid. We ground out the corroded anchors, refilled with marine-grade epoxy, and installed fresh OEM PGT stainless steel rollers with a resealed track. Half a day, no full slider replacement. A crew from West Palm Beach had quoted a full door swap because they didn’t realize PGT roller carts are individually replaceable.

That repair-or-replace judgment matters here because Tequesta’s housing stock is concentrated in original mid-1960s through 1980s CBS ranch homes, many still fitted with jalousie windows or early aluminum single-pane frames. When a homeowner calls us about upgrading to PGT impact units or our Door Installation in Tequesta, the question is rarely whether PGT makes a good product. It’s whether the original rough opening can handle the heavier impact-rated sash without reshimming, and whether the existing frame is even worth bolting into. On a canal-front home, the answer often involves marine-grade anchors and a fresh permit through the Village.

PGT Models & Products We Service in Tequesta

We service the full PGT residential line in Tequesta: WinGuard Aluminum Impact fixed, casement, and awning; WinGuard Vinyl Impact single hung, double hung, and sliding; Eze-Breeze vinyl sliding windows; and the PGT 5500 Series aluminum single hung. Our parts approach is simple. We use OEM PGT replacement hardware, including sashes, rollers, weatherstripping, and hinges, whenever the original series is still in production. We will not put new original parts into a severely corroded frame. At that point a marine-grade aftermarket replacement is the more honest call, and we’ll put that recommendation in writing with the price. For PGT products where the frame itself is structurally compromised or the glass package no longer meets current Florida Building Code wind-borne debris requirements, we replace the unit.

PGT Service Pricing in Tequesta

FAQs - PGT Windows & Doors in Tequesta

Does the Village of Tequesta require a separate contractor registration before we can install PGT impact windows? Yes. Every window and door permit in Tequesta runs through the Village of Tequesta’s own building department, not Palm Beach County. The Village requires separate contractor registration with the municipality, and the contractor name on the permit must match the name on the PGT product registration. Out-of-area installers file county permits by mistake all the time, which delays the job three to five weeks. We’re pre-registered with the Village, so our permits move without that delay.

How long do PGT WinGuard aluminum frames actually last on a canal-front home in Tequesta? The glass and laminate will outlast the frame on a saltwater canal. We typically see the first meaningful corrosion at the sill track and screw bosses within five to seven years on homes within a block of the Intracoastal or Loxahatchee River. The glass remains structurally sound for decades, but the aluminum frame is the wear item in this environment. A freshwater or inland home will get much longer frame life.

Can we replace just the rollers on a PGT sliding glass door, or does the whole door have to go? You can absolutely replace just the rollers if the frame track is still sound. PGT roller carts are individually replaceable, and we stock OEM PGT stainless steel rollers in our Tequesta service vehicles. The whole door only goes when the frame itself is corroded through, or when the track is too far gone to hold a new roller square. Call (813) 320-9346 and we’ll tell you which situation you have after a quick look.

Will PGT impact windows hold up on the Jupiter Inlet side of Tequesta better than the Loxahatchee side? The wind loads are similar on both sides because Tequesta is narrow enough that the whole village sits in the elevated wind zone near the inlet. The Loxahatchee side tends to see more persistent saltwater contact because the river is closer to more homes, while the inlet side gets more direct spray during storms. PGT’s marine-grade hardware holds up on both, but we spec extra corrosion protection on the roller housings and anchors for Loxahatchee-side installations.

Do Tequesta’s original 1960s jalousie windows need full-frame replacement before PGT impact units can go in? Almost always, yes. Jalousie windows are not structurally compatible with the weight and anchoring requirements of PGT impact units. The rough openings in original CBS walls usually need to be reframed and reshimmed to carry the heavier impact-rated sash. We handle the full opening rebuild as part of the replacement, including the Village permit and inspection. Call (813) 320-9346 for a written quote on your specific openings.

Service Areas Near Tequesta

Doing PGT service in Tequesta keeps our trucks close to the water every day. We also run service through Apollo Beach, Anna Maria, and the surrounding pockets of Tequesta service area where the housing stock and salt exposure run closest to what we see here. For waterfront PGT work on the gulf side, we have a crew that covers PGT service in Treasure Island, and our inland team handles PGT service in Umatilla when the job takes us that way.

Book Your PGT Service in Tequesta Today

If your PGT windows or doors are binding, corroding, or just not sealing the way they should in Tequesta, call (813) 320-9346. We will put a straight answer and a written price in front of you, usually same week. If it needs to be in writing to be true, we will put it in writing.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tequesta since 2008. Dale grew up in Seminole Heights, learned the glazing trade at Hillsborough Community College, and has spent nearly two decades measuring, setting, and sealing windows and doors across South Florida. His father ran a small building-maintenance outfit for thirty years, so Dale grew up understanding that a callback is a character flaw, not just an inconvenience.