Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Boca Raton, FL | TruePane Windows & Doors
We service and repair CGI windows and doors throughout Boca Raton, and we do it as an independent shop, not as a manufacturer affiliate. The one thing that makes our CGI work different here is that we know the HOA finish codes cold. Before we touch a single frame, we know whether your community demands dark bronze, champagne bronze, or sandstone, because getting that wrong in Boca Raton means a rejected architectural application and a permit delay measured in months. Call (813) 320-9346 for a straight answer and a free estimate.
Why Boca Raton Residents Choose Us for CGI Service
Our lead installers have rebuilt hundreds of CGI Studio, Estate, and Sovereign units across Boca Raton, so we know where salt air and track wear hit first. That matters when your slider has been in service since the 1990s and the HOA is asking questions. Dale Kessler grew up in a glazing family and has spent the better part of two decades setting and sealing windows and doors across Florida. He runs TruePane the way his father ran a building-maintenance outfit for thirty years: a callback is a character flaw, not an inconvenience. We carry OEM CGI rollers, gaskets, and locks, and we keep marine-grade aftermarket parts on hand for the situations where the original part already failed once and should not go back in. Our CGI sales & service work in Boca Raton is built around one standard: if the pane is not true, the job is not done.
Common CGI Windows & Doors Problems We Solve in Boca Raton
- Corroded and pitted aluminum frames on Estate sliders. Homes within a mile of the Intracoastal or A1A get salt-air oxidation concentrated along the bottom track and screws. We see pitting in under ten years on non-marine-grade frames, and we rebuild the track with marine-grade parts rather than masking the damage.
- Seal failure and fogging in original CGI Studio insulated glass. East-facing windows in Boca Raton take the worst of the salt haze and morning sun. Fogged seals are the most common reason a Studio unit gets replaced, and we can tell you whether a glass pack makes sense or if the frame is too far gone.
- Worn or seized rollers and tracks in Estate sliding doors. Doors installed in the 1990s under original HOA architectural standards have decades of sand and salt in the tracks. We pull the panel, clean or replace the track, and set it so the door moves without binding in July humidity.
- Sovereign impact units that leak around mounting flanges. Impact glass passes missile tests, but years of Intracoastal humidity crack stucco reveals, and water finds the flange. We re-seal, re-anchor, and re-flash so the unit holds water out as well as it holds wind out.
- Dead locks and hardware failures on CGI doors. Salt corrodes lock bodies and strike plates faster here than inland Palm Beach County. We stock OEM locks for the common CGI lines so a failed lock does not leave a door unsecured while we wait on a factory order.
CGI Service in Boca Raton: What Local Conditions Mean for Your Equipment
Boca Raton is a rare city where a CGI replacement window or door must clear three separate approvals before we can pull a permit: the community’s architectural review board, the City of Boca Raton building department, and the Florida Product Approval system. That stack can run eight to twelve weeks, and it forces us to know the exact bronze finish each HOA demands before we even quote the job. In Broken Sound, dark bronze. In other communities, champagne bronze or sandstone, tied to the original developer palette. That is the workflow reality that separates Boca Raton from Delray Beach or Deerfield Beach. For CGI owners, it means a service call is never just about the glass. It is about whether the repair keeps the unit visually identical to what the HOA approved twenty years ago. We have walked through that process enough times to tell you exactly what your board will ask for, which paperwork it needs, and where the delays usually happen.
CGI Models & Products We Service in Boca Raton
We service the CGI Estate Collection, Studio Collection, Sovereign Impact-Resistant Series, and Targa Series. Most of the CGI units we see in Boca Raton are Estate sliders and Studio single-hungs from the 1990s and 2000s, along with newer Sovereign impact units on waterfront homes. We prioritize OEM factory gaskets, rollers, and locks because that is what keeps a Sovereign or Estate performing the way the HOA expects. When an original part is unavailable or has failed prematurely, we use a proven marine-grade aftermarket part instead. We recommend repair when the frame is sound and the glass and seals are intact. We recommend replacement when the unit is a pre-2000 single-pane CGI or corrosion has eaten into the frame or mullion. Our Boca Raton service area coverage means we keep the common parts on the truck, not in a warehouse across the county.
CGI Service Pricing in Boca Raton
CGI service in Boca Raton runs on a few clear drivers: which model you own, whether the part is OEM or marine-grade aftermarket, and how far corrosion has traveled. A roller and track rebuild on an Estate slider costs less than a full glass pack replacement on a fogged Studio unit, and a Sovereign flange leak repair lands in between. What you will not get is a vague number. Our free estimate is a written line-item quote with the exact parts, the labor, and the warranty layers registered in writing before the truck leaves your driveway. Call (813) 320-9346 for an exact figure. The estimate is free, and the quote does not change once work starts.
Serving Boca Raton, FL - Our Local Coverage Area
We’re based in the Boca Raton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Boca Raton
No. Boca Raton has one of the highest concentrations of HOA-governed planned communities in Florida, including Boca West, Broken Sound, Woodfield, and Boca Pointe. Nearly every window or door replacement requires architectural review board approval specifying frame color, style, and glass type before the city permit can be applied for. We handle the paperwork and know what each major community’s approved product list requires. Call (813) 320-9346 and we will tell you exactly what your board will ask for.
Salt air is the answer. Boca Raton’s Intracoastal Waterway runs directly through the city, and A1A hugs the Atlantic shoreline, so homes within a mile of the water sit in a salt-air corrosion zone that oxidizes aluminum frames and hardware noticeably faster than inland Palm Beach County. Non-marine-grade CGI frames routinely show pitting and seal failure in under ten years near the water. Marine-grade parts and proper sealing slow that down considerably.
Most are not, and that is a problem when you go to sell or when an HOA inspection comes up. Boca Raton sits in a 170 mph design wind speed exposure zone, and every replacement window and door must carry a current Florida Product Approval number. Original 1990s CGI units installed under older codes often do not meet the current anchoring schedule. We can assess your existing units and tell you whether repair keeps you compliant or whether full frame replacement is required.
Look at the bottom track and the frame corners. If the track is pitted but the frame is sound, we can rebuild the track and replace the rollers. If corrosion has eaten into the frame or mullion, or the unit is a pre-2000 single-pane CGI, replacement is the honest call. At a Broken Sound home on Jog Road, we found an original Estate slider with a deeply pitted bottom track and a dead lock. We pulled the panel, replaced the track and rollers with marine-grade parts, installed a new OEM lock, and re-aligned the door so the dark bronze finish stayed untouched and the panel passed wind mitigation and leak inspections the following week. Call (813) 320-9346 for a straight assessment.
This is a real Boca Raton problem. Some communities specify champagne bronze or sandstone per their original developer palette, while others require dark bronze. Submitting the wrong shade gets an architectural application rejected outright, restarting a review cycle that can run four to eight weeks. We work with your HOA’s approved finish list and source the correct-color part, including aftermarket options when the OEM part is not available in your required shade. If it needs to be in writing to be true, we will put it in writing. Call (813) 320-9346 and we will check your community’s requirements before anything gets ordered.
Service Areas Near Boca Raton
We serve Boca Raton and the surrounding communities, including CGI service in Boynton Beach and CGI service in Briny Breezes. Our techs work across the coastal corridor from Delray Beach north through Highland Beach and into the planned communities west of I-95.
Book Your CGI Service in Boca Raton Today
Call (813) 320-9346 for a free estimate on your CGI windows or doors in Boca Raton. A live person answers, we show up when we say, and the quote is in writing before any work begins.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boca Raton and the surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.