Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Hillsboro Beach, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent CGI Hillsboro Beach Window Installation and door service across Hillsboro Beach. We repair, replace, and maintain CGI impact units on both the Atlantic and Intracoastal sides of A1A. The thing that separates our CGI work here from any other market is the dual-salt-exposure reality: the same window often needs a different parts spec on its ocean face than it does on its ICW face. Most companies miss that. We don’t. Call (813) 320-9346 for a straight answer and a free estimate.
We’re an independent CGI service provider. We are not manufacturer-affiliated, and we are not an authorized CGI dealer. That independence matters when it comes to giving you honest repair-versus-replace advice.
Why Hillsboro Beach Residents Choose Us for CGI Service
We’ve been setting and sealing windows along this narrow barrier island long enough to know that CGI’s 5000 Series frames behave differently on the ocean side of Hillsboro Mile than they do three blocks west facing the Intracoastal. Dale Kessler, our founder, spent the better part of two decades measuring, setting, and sealing windows across the Tampa Bay area before bringing that storm-rated installation discipline to Broward County. His rule is on the whiteboard in our shop: if the pane is not true, the job is not done.
We keep independent records of corrosion, seal, and hardware failure intervals on CGI products in Hillsboro Beach. Manufacturer reps never see this data. Homeowners who need a straight answer about whether to patch or replace a 15-year-old impact unit call us because we’ll tell them plainly: if the frame is pitted through or the glass seal is blown after a storm, replacing the entire impact unit is the right move. Patching hardware on an exhausted aluminum window just buys you another humid August of worry.
We stand behind our work with a 90-Day Done Right Promise. Both manufacturer warranty layers get registered in writing, with durations stated, before our truck leaves your driveway. That’s The Keystone Standard. If it needs to be in writing to be true, we will put it in writing.
Common CGI Windows & Doors Problems We Solve in Hillsboro Beach
- Pitted and corroded bottom rails on 5000 Series frames. Factory anodized aluminum shows pitting and white oxidation along the bottom rails within five to seven years on the oceanfront side of A1A. The wind-driven Atlantic salt spray is relentless. We inspect the frame depth before recommending repair; a surface blemish is one thing, a rail pitted through is a replacement.
- Binding spring-loaded balancers in Estate Collection single hungs. The original coil springs inside the jambs bind when salt-laden air crystallizes on them. On homes with both exposures, we see it happen faster than the manufacturer’s wear schedule predicts. The sash gets stiff, then refuses to stay up. We stock replacement balances rated for marine environments.
- Squealing, sticking sliding glass door rollers. This is everywhere in 1990s-era oceanfront condos in Hillsboro Beach. The original rollers corrode to the point that tenants force the panel until the track goes out of square. Once the track is sprung, you’re not just swapping rollers; you’re re-shimming the entire threshold. We address it early when we can.
- Weatherstripping and glazing bead failure on Intracoastal-facing facades. The constant wind-driven ICW salt mist eats weatherstripping on western exposures. Water intrusion shows up at sill corners during summer thunderstorms. This is a flashing and glazing bead problem, not just a gasket problem.
- HOA-driven replacement requirements. Condo boards in Hillsboro Beach often mandate uniform product appearance. That means matching the original bronze or clear finish. We work with boards and property managers to spec products that satisfy both the association and Broward County’s HVHZ wind-load requirements.
CGI Service in Hillsboro Beach: What Local Conditions Mean for Your Equipment
Only in Hillsboro Beach are A1A oceanfront structures separated from the open Atlantic by a two-lane road and a thin dune, while their back patios sit less than 100 feet from the Intracoastal Waterway. The same CGI window model can show pitting on its ocean-facing frame and salt bloom on its ICW-facing sash within the same calendar year. That’s not a manufacturing defect. That’s geography.
For CGI owners, this dual exposure means we spec stainless steel hardware and marine-rated coatings on both sides of the unit, not just the ocean front. A contractor working a few miles inland in Pompano Beach proper would never think to check the ICW side for frame pitting. We do it as standard practice here. We also avoid standard 6063 aluminum extrusions wherever we can, favoring products with factory-applied marine-rated coatings. This spec upgrade is rarely necessary on the mainland. In Hillsboro Beach it’s the difference between a window that holds for fifteen years and one that needs hardware replacement in five.
CGI Models & Products We Service in Hillsboro Beach
We service the full residential CGI line that we encounter throughout Hillsboro Beach: the Estate Collection Impact Casement Windows, the 5000 Series Impact Single Hung, the 9000 Series Impact Sliding Glass Doors, and Fixed/Picture Impact Windows, plus Hillsboro Beach Door Installation when full replacement is needed. The older 5000 Series units are the most common service call we field in town, particularly in mid-rise condos built between the 1960s and 1990s.
On parts, our approach is specific. We use OEM CGI hardware when it’s available and appropriate, especially casement hinges, splash blocks, and impact-rated glazing beads. But for rollers, locking hardware, and fasteners, we deliberately install marine-grade stainless or factory-authorized aftermarket replacements that meet HVHZ wind-load requirements. The OEM mild-steel parts simply cannot hold up to Hillsboro Beach’s dual salt exposure. We tell you exactly what we’re installing and why before we install it.
CGI Service Pricing in Hillsboro Beach
CGI service pricing in Hillsboro Beach depends on what we find when we open the unit. A roller replacement on a 9000 Series slider runs less than a full frame replacement on a pitted 5000 Series single hung. A spring balance replacement typically falls in the $180 to $340 range, and most hardware repairs are completed in a single visit. What drives cost up: frame pitting that requires a full impact unit replacement, HOA finish-matching requirements, and any wind-load recalculations needed for Broward County permitting on oceanfront structures.
A free estimate from us includes a written line-item quote with both warranty layers stated on paper, no change orders, and no surprise line items on the final bill. Call (813) 320-9346 for an exact quote. Estimates are free, and a live person answers the phone. Always.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Hillsboro Beach
Hillsboro Beach is a narrow barrier island with salt-laden Atlantic wind on one side of your house and Intracoastal spray on the other, often simultaneously. On the mainland, frames typically face only one wind-driven salt source. Here, even marine-grade aluminum hardware corrodes through within five to seven years on the oceanfront side of A1A. We see factory anodized frames on CGI 5000 Series units pitted along bottom rails within that same window. This is a local environment fact, not a product defect.
Usually yes. Condo associations in Hillsboro Beach often require uniform product appearance across the building envelope, which means matching the original bronze or clear finish on any replacement impact window or door. We work directly with HOA boards and property managers to spec products that meet both the association’s finish requirements and Broward County’s High-Velocity Hurricane Zone code. Board approval delays are common, so we help you prepare the product submittal before the board meets. Call (813) 320-9346 if you need help with this.
Sometimes, but we’re honest about the limits. A surface blemish on an anodized frame can be cleaned and sealed. A bottom rail pitted through is structural; once the aluminum is compromised, the impact rating is compromised with it. On a 15-year-old unit with a blown seal, patching hardware is throwing good money at a window that’s already failed. We tell you plainly which situation you have. Call (813) 320-9346 for an honest assessment. The estimate is free.
Intracoastal-facing facades in Hillsboro Beach sit within 100 feet of brackish water in many cases. The wind-driven ICW salt mist lands directly on door tracks and rollers. The original mild-steel rollers used in many 1990s-era CGI sliding glass doors corrode, seize, and then the panel gets forced until the track springs out of square. On the ICW side, we replace rollers with marine-grade stainless and re-shim the threshold as part of the same service call. It’s the only spec that holds up here.
Oceanfront structures in Hillsboro Beach must meet Broward County’s High-Velocity Hurricane Zone standards, which means Miami-Dade NOA-approved impact products. The specific wind-pressure rating depends on the building’s height, location relative to the mean water line, and the size of the opening. We calculate wind-load requirements for every oceanfront replacement and pull permits as needed. If you’re not sure what your current units are rated for, call (813) 320-9346 and we’ll check.
Service Areas Near Hillsboro Beach
We provide CGI windows and doors service across the coastal corridor around Hillsboro Beach. If you’re a few miles south, see our CGI service in Hollywood. Across the state on the Gulf side, we also offer CGI service in Holmes Beach. For the full picture of our coverage, visit our CGI sales & service page, or check our Hillsboro Beach service area page for local details.
Book Your CGI Service in Hillsboro Beach Today
If you’ve got a CGI window or door that’s binding, pitting, or leaking on this barrier island, don’t wait for the next storm to find out. Call (813) 320-9346 for a free estimate. A live person answers every call, 24/7, and we’ll schedule your service at a time that works for you. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.