CGI Windows & Doors in Pembroke Park, FL

CGI Windows & Doors in Pembroke Park, FL | TruePane Windows & Doors

We provide independent CGI window and door service across Pembroke Park, and one thing separates our work here from everywhere else we operate: every permit we pull in this town must cite a Miami-Dade Notice of Acceptance number on the application itself. A CGI unit with only a Florida Product Approval will not pass inspection in Pembroke Park, full stop. If you own CGI windows or doors that need repair, parts, or a code-compliant replacement, call (813) 320-9346 and we’ll spec it right the first time.

Call (813) 320-9346

Why Pembroke Park Residents Choose Us for CGI Service

We have been setting and sealing storm-rated openings in Broward County long enough to know which CGI series carry current Miami-Dade NOAs and which do not. That matters more in Pembroke Park than almost anywhere else in Florida. Dale Kessler, our owner, grew up around glazing and building maintenance, and he built TruePane on a simple rule: if the pane is not true, the job is not done. That standard applies to every CGI repair we take on, whether it is a fogged lite, a corroded sill, or a full frame tear-out on a 1960s CBS ranch. We are an independent service provider; we are not manufacturer-affiliated or authorized by CGI. That independence means we recommend what the house actually needs, not what a factory program pushes. We also register both warranty layers in writing before our truck leaves the driveway, which is a practice most companies skip until there is a problem.

Common CGI Windows & Doors Problems We Solve in Pembroke Park

• Aluminum frame corrosion at the sill and weep holes. Pembroke Park’s salt-laden humidity and constant irrigation spray eat aluminum from the bottom up. We see ground-floor CGI sliders with white, powdery residue along the track, blocked weep holes, and sills that hold water against the frame. Left alone, that corrosion compromises the anchorage the HVHZ rating depends on.
• Glazing seal failure and fogging in older single-pane CGI units. A CGI unit still in service from the 1990s has spent thirty years under South Florida UV and daily thermal cycling. Seals fail, condensation settles between the lites, and the glass loses clarity. We replace the insulated glass unit and reseal the sash so the original NOA stays intact.
• Weatherstripping and interlock wear on impact sliders. When a CGI slider no longer meets HVHZ air infiltration limits, you get drafts and water intrusion during wind-driven rain. We replace the wool pile, interlock gaskets, and roller assemblies, then check the panel alignment so the door locks square again.
• Jalousie-to-impact retrofits done poorly. In Pembroke Park, we regularly find original CGI casements surface-mounted into deteriorated 1960s CBS openings. The anchors pull loose over time. We pull the unit, re-anchor the rough opening with embedded straps, and reinstall to current structural anchorage specs.
• Hardware and balance failures on heavy impact sashes. CGI impact sashes are heavy. Balances wear out, rollers flatten, and locking hardware loosens. We replace with CGI OEM components so the sash stays true and the NOA remains valid.

CGI Service in Pembroke Park: What Local Conditions Mean for Your Equipment

Pembroke Park is the only municipality in Broward County where every residential permit for a window or door replacement must cite a Miami-Dade NOA number on the permit application itself. Inspectors here reject products carrying only a standard Florida Statewide Product Approval without an explicit HVHZ listing. That is not a technicality, and it catches out-of-county contractors constantly. Here is the trap: a contractor migrating down from Palm Beach or Central Florida buys a window that is “Florida approved,” writes it into the permit, and the Pembroke Park inspector bounces it because there is no NOA number attached. The homeowner has paid for a unit that legally cannot be installed. Every CGI series we recommend for this town, the Sentinel Storm, the Estate Collection, the Targa Series, and the Commercial Series, carries the Miami-Dade NOA required to pass inspection here. We verify the NOA number against the current Miami-Dade product control listing before we ever order the unit, and we write that number on the permit application. If it needs to be in writing to be true, we will put it in writing.

CGI Models & Products We Service in Pembroke Park

We service the full CGI residential and commercial lines you are likely to find in Pembroke Park: CGI sales & service covers Sentinel Storm, Estate Collection, Targa Series, and Commercial Series units. When a repair must preserve the original NOA, we use CGI OEM replacement sashes, balances, rollers, and hardware. For out-of-production or cosmetic items, we source marine-grade aftermarket parts that meet or exceed the original corrosion spec. We stock common CGI hardware locally so most Pembroke Park repairs do not wait on a factory shipment from Hialeah or Medley. Here is the honest line: when the cost of OEM parts plus labor exceeds 60% of a new HVHZ-rated unit, we recommend full replacement rather than patching an aging window. We will show you the math on paper, side by side.

CGI Service Pricing in Pembroke Park

FAQs - CGI Windows & Doors in Pembroke Park

Service Areas Near Pembroke Park

We serve Pembroke Park and the surrounding South Broward communities. Our Pembroke Park service area covers the full town, and we also provide CGI service in Pembroke Pines and CGI service in Pinecrest for homeowners who need the same NOA-verified installation standard across the HVHZ boundary.

Book Your CGI Service in Pembroke Park Today

We answer the phone when you call, and our techs show up uniformed, background-checked, and prepared to measure twice. If you have a fogged CGI lite, a corroded sill, or a full jalousie retrofit on the books, call (813) 320-9346 to schedule your free estimate. We serve Pembroke Park and the wider Pembroke Park service area with the same standard on every job: if the pane is not true, the job is not done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pembroke Park and South Florida since 2008.