Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Stuart, FL | TruePane Windows & Doors
If you own CGI windows or doors in Stuart, you already know they’re built for hurricane country. What you may not know is that the salt air here wears on them differently than it does ten miles inland, and that’s exactly why our Indiantown CGI service covers Stuart as well treats every job as a marine-corrosion case as much as a code-compliance case. We repair, tune, and replace CGI windows and doors across Martin County using OEM parts when the frame warrants them and marine-grade upgrades when the coast demands better. Call (813) 320-9346 and we’ll send a technician who knows CGI’s aluminum and hardware like a mechanic knows an engine block.
Why Stuart Residents Choose Us for CGI Service
We’re not a manufacturer-authorized CGI dealer, and we won’t pretend to be. TruePane Windows & Doors is an independent service provider, which means our recommendation is based on what works on your house, not what a factory program tells us to sell. Our crews work on CGI Estate Collection and Sentinel Series units every week across Stuart, Port Salerno, Rio, and Golden Gate, and we also handle CGI in Jupiter. We’ve pulled apart enough corroded rollers and delaminated sashes to know which CGI parts age gracefully in salt air and which ones need an upgrade the first time they’re touched.
Dale Kessler founded this company in 2008 after years of watching installs go out of true and warranties get voided over paperwork. He grew up in a Tampa Bay family that ran a building-maintenance outfit for thirty years, and a callback was treated as a character flaw. That same standard drives our Stuart service calls. Our technicians measure every opening twice, specify parts on paper, and stand behind the work with a 90-Day Done Right Promise. If the pane is not true, the job is not done.
We also answer the phone with a live person, 24 hours a day. Not a voicemail tree. Not a callback form. If something on your CGI unit fails on a Saturday afternoon, you get a person on the line who can schedule the visit.
Common CGI Windows & Doors Problems We Solve in Stuart
- Pitting and white oxidation on anodized frame rails. South- and east-facing CGI frames within a few miles of the St. Lucie Inlet or Hutchinson Island start showing pitting within five to eight years. The bottom rails catch the most salt, especially on clear or silver anodized finishes. We clean, stabilize, and re-seal salvageable frames, and we’ll tell you honestly when a frame is pitted through and needs replacement.
- Frozen sliding door rollers and seized lock mechanisms. Salt works into the track assemblies of CGI sliding glass doors faster in Stuart than nearly anywhere else on the Treasure Coast, because the lagoon and the ocean bracket the whole city. We replace factory rollers and locks with stainless or marine-grade aftermarket hardware when the original CGI parts have corroded prematurely. It’s a better fit for the coast than the factory hardware, and we say so plainly.
- Stress cracks at the corners of impact laminated glass. Repeated wind-load cycles from hurricane seasons flex older CGI sashes enough that the laminated glass can develop corner stress cracks. It isn’t a structural failure today, but it is a sign the unit has cycled through more storms than it was meant to take. We inspect, document, and replace sashes when delamination has begun.
- Failed compression weatherstripping on casement and awning sashes. CGI’s compression seals keep out wind-driven rain and salt mist, but they harden and crack after enough humid seasons. When a casement sash no longer seals tight, humid air and salt mist work their way past the gasket and accelerate corrosion on the hardware behind it. We replace the weatherstripping with the correct profile for your CGI model, not a generic strip that closes the gap but loses the compression the window was designed around.
- Jalousie-to-impact conversions on older ranch homes. This isn’t a CGI failure, but it’s the most common service call we run in Stuart’s 1950s and 1960s neighborhoods. Original jalousie windows cannot be protected by shutters to meet Florida’s Wind-Borne Debris Region standard, which means a wind-mitigation report will flag them every time. We cut out jalousie frames, re-flash the block openings, and set CGI impact units in their place.
CGI Service in Stuart: What Local Conditions Mean for Your Equipment
Stuart occupies a narrow strip of land between the St. Lucie River and Indian River Lagoon on one side and the Atlantic Ocean across Hutchinson Island on the other. That geography means something specific: there is no “inland Stuart” when it comes to salt air. Homes in Golden Gate, El Portal, Rio, and even the subdivisions that feel far from the water sit in a marine envelope that corrodes aluminum frames, hardware, and weatherstripping years faster than comparably aged homes in, say, western Martin County or areas with CGI in Palm Beach Gardens. For CGI owners, the practical effect is that a window or door set into a CBS ranch in Golden Gate needs the same marine-grade hardware we would spec for a waterfront house on Hutchinson Island. We treat every Stuart CGI service call as a corrosion case first, because in this city, that’s the accurate read regardless of your distance from the shore.
Last fall our techs replaced three original jalousie windows in a 1960s CBS ranch in Golden Gate with CGI Estate Collection impact casements and fixed picture units. The old aluminum jalousie clips had seized from salt corrosion, and the homeowners couldn’t get a wind-mitigation report that would lower their Citizens premium. We cut out the jalousie frames, re-flashed the block openings, and set the new CGI sashes with stainless fasteners. The adjuster accepted the wind mitigation credits the same week. That’s the standard we work to in Stuart: service that accounts for the salt in the air and the code in the codebook.
CGI Models & Products We Service in Stuart
Our Stuart crews service the full CGI CGI sales & service range we carry: Estate Collection impact casement and fixed windows, Estate Collection impact single-hung and horizontal sliders, Estate Collection impact sliding glass doors, and the Sentinel Series impact windows and doors. We also field calls on older CGI lines that have been out of production for years, as long as the frame still has life in it. For parts, we always specify OEM replacement components when the frame or glass is covered by its original product approval. But after years of coastal exposure, we often upgrade rollers, hinges, and locks to stainless or marine-grade aftermarket hardware, because CGI’s factory hardware on older lines corrodes unusually fast near the lagoon. If the frame is pitted through or the glass has delaminated, we’ll tell you replacement is the better money, and we’ll quote it honestly on paper.
CGI Service Pricing in Stuart
CGI service pricing in Stuart depends on what’s failed and whether the unit is still under a product approval. A simple hardware swap on an Estate Collection slider typically runs $180 to $340, while a full-frame replacement of a jalousie into a CGI impact casement runs considerably more because the rough opening has to be re-flashed and the new sash set with stainless fasteners. Glass delamination on a Sentinel Series panel falls toward the upper end too. What we don’t do is pad the bill with surprise line items. You’ll get an upfront, line-by-line written quote before any work begins, and the price won’t move once we start. Call (813) 320-9346 to schedule a free estimate; we’ll send a technician who can look at the actual unit and give you numbers that mean something.
Serving Stuart, FL - Our Local Coverage Area
We’re based in the Stuart area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Stuart
Yes, because all of Martin County, including every Stuart neighborhood, falls within Florida’s Wind-Borne Debris Region, which requires impact-rated products on permitted window and door replacements. Waterfront or not, if you’re replacing windows or doors in Stuart, the code requires impact-rated units. And given that Stuart sits between the lagoon and the ocean, the same salt air argument applies almost everywhere within city limits. Call (813) 320-9346 to have us walk your house and show you what the local code requires, and what it doesn’t.
Salt-laden air from the St. Lucie River and Indian River Lagoon corrodes the factory rollers and track hardware on CGI sliding doors far faster in Stuart than in inland Florida. The fix isn’t another set of the same rollers; it’s upgrading to stainless or marine-grade aftermarket hardware that can handle the coastal environment. We’ve been doing this long enough to know which hardware lasts near the lagoon and which doesn’t, and we’ll spec the right one on paper before we touch the door.
Florida building code explicitly prohibits jalousies from being protected by shutters to meet the Wind-Borne Debris Region standard. So no, shutters won’t get you a passing wind-mitigation report, and your insurer will keep charging you the higher premium. Full replacement with impact-rated units is the only path that satisfies the code, the wind mitigation report, and your Citizens premium. We do those conversions regularly in Stuart, and we’ll quote the replacement honestly. Call (813) 320-9346 for a free estimate.
Downtown Stuart’s historic district adds a Florida SHPO preservation review layer for any commercial storefront or facade window replacement. That means the design, material, and sometimes the manufacturer of the replacement window must pass a preservation review before the permit moves forward. We’ve worked in Stuart long enough to know how to prepare CGI impact units so they meet both the SHPO’s design review and the Wind-Borne Debris Region code; the paperwork is part of the job.
It depends on how deep the pitting goes. Surface oxidation and white pitting on the bottom rails can often be cleaned, stabilized, and re-sealed with a marine-grade coating. But if the pitting has eaten through the rail or compromised the frame’s structural seal, replacement is the better money, and we’ll tell you so directly rather than sell you a repair that won’t hold near the lagoon. Call (813) 320-9346 and we’ll inspect the frames and give you an honest answer with numbers to back it.
Service Areas Near Stuart
TruePane Windows & Doors serves Stuart and the surrounding Martin County communities, including Port Salerno, Rio, Golden Gate, El Portal, and the neighborhoods around the St. Lucie Inlet. We also run calls for CGI owners in Stuart service area and south into northern Palm Beach County, plus our crews cover CGI service in Sunny Isles Beach and CGI service in Sunrise for coastal CGI owners who want independent repair work done right.
Book Your CGI Service in Stuart Today
If you’ve got a CGI window or door that’s binding, corroding, or letting salt air through, don’t wait for the next storm to make it worse. Call (813) 320-9346 for a free estimate, and we’ll send a technician who knows CGI and knows Stuart. If it needs to be in writing to be true, we will put it in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stuart and Martin County since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.