Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Jupiter Inlet Colony, FL | TruePane Windows & Doors
We provide independent CWS service across Jupiter Inlet Colony, and the one thing that separates our Jupiter Inlet Colony Window Installation work here is that we plan every job around the inlet. This is a barrier strip where both sides of a house get hammered by salt air, so our techs cross-train across CWS plus PGT, CGI, and ES Windows to isolate corrosion points before quoting. If your CWS window or door is binding, weeping, or leaking, call TruePane at (813) 320-9346 for a free estimate.
Why Jupiter Inlet Colony Residents Choose Us for CWS Service
Dale Kessler started TruePane in 2008 after two decades measuring, setting, and sealing windows and doors across the Tampa Bay area, and the rule he kept on the shop whiteboard from day one was simple: if the pane is not true, the job is not done. That governs how we handle CWS equipment in Jupiter Inlet Colony. We know the Series 6000 casement, the Series 8000 slider, the Series 9000 single hung, and the Series 7000 horizontal roller as well as we know any brand on the South Florida impact market. We’re not a manufacturer-authorized CWS dealer, and we do not pretend to be one. What that means for you is an independent diagnostic eye, someone who will tell you honestly when a CWS frame is worth saving and when the inlet salt has already won. Nearly every Jupiter Inlet Colony job we take is coastline-adjacent, and a misread corrosion point on a CWS assembly does not just waste money. It turns into a failed wind mitigation inspection, and then you get to do the job twice. We would rather do it once, correctly, with genuine CWS parts and both warranty layers registered in writing before the truck leaves your driveway. CWS sales & service is a deep part of what we do, but the standard is always the same: done right.
Common CWS Windows & Doors Problems We Solve in Jupiter Inlet Colony
- White, powdery pitting on CWS aluminum frames. On inlet-facing homes in Jupiter Inlet Colony, the bottom rail and weep channels on CWS frames develop that chalky white bloom within 8 to 12 years. It looks like a cosmetic problem. It is not. That bloom is the aluminum sacrificing itself to the salt, and left alone it will compromise the frame’s structural integrity enough to fail a wind mitigation inspection.
- Seized rollers on CWS Series 8000 sliding glass doors. This is our most common CWS repair call in Jupiter Inlet Colony. The stainless roller housings galvanically weld to the aluminum track, especially on west-facing elevations where the inlet’s constant tidal spray keeps airborne salt elevated even when the air feels calm. A simple roller swap will not fix it. You need a full track-and-roller assembly replacement.
- Perimeter caulk joint failure on original CWS flanged windows. We see this on the 1950s to 1970s CBS homes throughout Jupiter Inlet Colony. Salt air degrades the sealant interface between the aluminum flange and stucco, and the leak hides behind interior drywall until wind-driven rain finally shows you a water stain. By then the rough opening may already be wet.
- Counterbalance spring failure on CWS double-hung windows. The inlet-facing elevations in Jupiter Inlet Colony wick constant moisture into the balance cartridge. The spring rusts, the cartridge binds, and the sash drops or refuses to stay open. We typically see this within a few years of installation on west-facing openings, which surprises owners who assumed the inlet side was protected.
- Jalousie-to-CWS retrofit complications. Many original Jupiter Inlet Colony homes replaced jalousie windows with CWS flanged impact units decades ago. The retrofit often left the stucco return too thin or the rough opening slightly out of square, and after years of salt exposure, those seams are the first place we find hidden corrosion and water intrusion.
CWS Service in Jupiter Inlet Colony: What Local Conditions Mean for Your Equipment
Here is a checkable fact that changes how CWS windows and doors must be specified in Jupiter Inlet Colony, and you will not find it in generic brand literature. The entire municipality sits on a razor-thin barrier strip, and every residential parcel lies within 700 feet of either the Atlantic Ocean or the Jupiter Inlet’s tidal channel. Palm Beach County’s wind-speed map pins the whole town into Exposure D, the most severe coastal wind-load category. That means a CWS window on the west side of Lighthouse Drive, facing the inlet, must meet the same Florida Product Approval listing for Exposure D as a CWS window on the oceanfront side of the same street. We have never done a CWS replacement in Jupiter Inlet Colony that did not require that Exposure D certification, and most insurance inspectors will reject any unit that is not certified to that exact exposure. The practical takeaway for CWS owners here is that you cannot buy a mid-range inland impact window for the “sheltered” side of your house and expect it to pass. There is no sheltered side in Jupiter Inlet Colony. Jupiter Inlet Colony service area work, by definition, means Exposure D on every opening.
CWS Models & Products We Service in Jupiter Inlet Colony
We service the full CWS residential line: Series 6000 impact casement and fixed windows, Series 8000 aluminum sliding glass doors, Series 9000 impact rated single hung windows, and Series 7000 horizontal roller windows. When a CWS frame is sound and repair is the right call, we use genuine CWS replacement parts whenever they are available within a reasonable lead time. Mixing offshore aftermarket hardware into a CWS impact assembly can void the installation’s Florida Product Approval, and we will not do that to your warranty or your wind mitigation. For Jupiter Inlet Colony turnaround, we stock the most common CWS roller assemblies, balance cartridges, and marine-grade sealants locally, so a repair does not stall while a part ships from a warehouse two states away. On frames that are 15 or more years old and already compromised by inlet salt, we level with you: full-frame replacement is usually the cheaper long-term solution than rebuilding a corroded flange and redoing the waterproofing on a unit that is already on borrowed time.
CWS Service Pricing in Jupiter Inlet Colony
CWS service pricing in Jupiter Inlet Colony breaks down into a few honest tiers. A CWS Series 8000 track-and-roller replacement typically runs $420 to $700 depending on whether the track is salvageable or the frame shows galvanic corrosion. A CWS impact sash re-seal, which we do a lot of out here where salt air chews through perimeter sealant, generally falls between $180 and $340. Full CWS frame replacements on inlet-facing homes start around $5,500 and climb with size, finish, and the condition of the rough opening. What drives the cost in Jupiter Inlet Colony specifically is the Exposure D requirement: the unit must be certified for the most severe wind-load category, which rules out mid-tier models. A free estimate from us means we measure every opening twice, quote your CWS options side by side on paper, and register both warranty layers in writing before the truck leaves. No change orders, no surprise line items on the bill. Call (813) 320-9346 for an exact quote. Estimates are free.
Serving Jupiter Inlet Colony, FL - Our Local Coverage Area
We’re based in the Jupiter Inlet Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Jupiter Inlet Colony
Jupiter Inlet Colony itself does not issue a separate CWS-specific permit beyond what Palm Beach County already requires, but the county’s wind-speed map places the entire town in Exposure D, which means your CWS units must carry a Florida Product Approval listing for that exact exposure category. We handle the permit paperwork and the product approval documentation on every job, so you are not left sorting through engineering specs on your own. Call (813) 320-9346 and we will walk you through what your specific opening needs.
It depends on how far the galvanic corrosion has traveled. If the rollers have seized but the aluminum track is still sound, we can do a full track-and-roller assembly replacement with genuine CWS parts and get your Jupiter Inlet Colony Door Installation sliding cleanly again. If the bottom weep channel is packed with white corrosion bloom and the frame itself has started to pit along the rail, replacement is the honest recommendation. On Lighthouse Drive in Jupiter Inlet Colony, our crew pulled a CWS Series 8000 slider where the stainless roller assemblies had fused to the aluminum track entirely. We ordered a replacement CWS 8000 with a marine-grade finish, re-anchored it into the CBS rough opening to meet Exposure D wind-load requirements, and recaulked the stucco interface with a high-movement sealant. That home passed its wind mitigation inspection the same week.
Markedly faster. The inlet’s constant tidal flushing keeps airborne salt concentration persistently elevated in Jupiter Inlet Colony even during calm, non-storm periods, and because the land parcel is so narrow, there is no slack in the exposure. We routinely find west-facing CWS frames in Jupiter Inlet Colony with corrosion as severe as oceanfront units, a pattern that does not hold in wider barrier-island communities or inland Jupiter. Expect the bottom rail and weep channels on inlet-facing CWS aluminum to show pitting within 8 to 12 years, versus closer to 15 to 20 on sheltered inland homes. If you are seeing white powder on your frames, call (813) 320-9346 and we will tell you whether it is cosmetic or structural.
The original jalousie-style windows on those mid-century CBS homes in Jupiter Inlet Colony were replaced over the years, most often with CWS flanged impact windows that met the early code requirements. The Series 6000 fixed and casement windows are the most common CWS models we service on those original structures. Many of those installations are now 15 to 20 years old, and the perimeter caulk joint between the aluminum flange and stucco has degraded from decades of salt air, which is why we get so many calls about hidden leaks. If your CWS flanged windows have never been re-sealed, get them looked at before the next wind-driven rain finds the gap.
The CWS manufacturer warranty travels with the product and the installation, so if your association replaces the CWS units and the installation is done to spec, the warranty should transfer. What actually matters for Jupiter Inlet Colony owners is whether the installing company registered both warranty layers in writing and whether the replacement units carry the Exposure D Florida Product Approval. We have seen association jobs where the unit itself was fine but the paperwork was never registered, and the owner discovered the gap only when a wind mitigation inspection came up short. If it needs to be in writing to be true, we will put it in writing. Every CWS job we do gets both warranty layers registered before our truck leaves the driveway.
Service Areas Near Jupiter Inlet Colony
TruePane handles CWS service throughout Jupiter Inlet Colony and the surrounding coastal communities. If you are nearby in CWS service in Jupiter Island, we work the same Exposure D coastline and keep marine-grade parts on the truck. We also cover CWS service in Kenneth City and the broader Jupiter and Tequesta corridor, where corrosion rates slow down a little once you get off the barrier strip. Call (813) 320-9346 to confirm your address is in our service area.
Book Your CWS Service in Jupiter Inlet Colony Today
If your CWS window or door is binding, weeping, pitting, or leaking anywhere in Jupiter Inlet Colony, call TruePane at (813) 320-9346 for a free estimate. We measure twice, quote your options on paper, and register both warranty layers before we leave. Done right, the first visit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jupiter Inlet Colony and the surrounding South Florida coast since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.