Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Redington Shores, FL | TruePane Windows & Doors
We provide independent CWS window and door service throughout Redington Shores, from full impact-rated replacements to salt-corrosion repairs on older aluminum lines. What sets our work here apart: we treat every opening as a coastal installation, because on this barrier island, there is no sheltered side. Call (813) 320-9346 for a free estimate on any CWS repair or replacement. We’re local, we’re licensed, and we answer the phone.
Why Redington Shores Residents Choose Us for CWS Service
Our crews have worked on CWS aluminum and impact-rated window lines in hundreds of Redington Shores concrete block structures, where the double-front salt exposure from the Gulf and Boca Ciega Bay shows failure points that no inland contractor ever sees. For homeowners looking for Redington Shores Window Installation, this local expertise matters. Dale Kessler started this company in 2008 after years of watching out-of-true installs void warranties that homeowners thought were solid. He grew up in Seminole Heights, learned the trade at Hillsborough Community College’s construction technology program, and has been setting and sealing windows across the Tampa Bay area for two decades. The storm-rated work is what he’s known for: tight enough that a follow-up inspection is never a surprise. We cover each job with the 90-Day Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, durations stated, before the truck leaves the driveway. If the pane is not true, the job is not done.
Common CWS Windows & Doors Problems We Solve in Redington Shores
- White corrosion bloom on CWS 8000 single-hung aluminum frames. We see this within five to seven years, even on newer units. Gulf salt aerosols attack the west elevation while Intracoastal air works the east side. There is no leeward face on this island, so the frame gets hit from every angle.
- Failed corner seals and clogged weeping channels on CWS 7000 sliders. Standing saltwater trapped in the sill track pits the aluminum. The corrosion accelerates because the pitted metal holds moisture longer. We inspect weep channels first, then the corners.
- Stripped or seized operator mechanisms on older jalousie-style CWS units. Many of the 1960s beach cottages along Gulf Boulevard still have these. The crank gears bind after years of salt grit. We’ve had calls from owners who could not close the window ahead of a named storm. That is a dangerous position to be in.
- Compression-set weatherstripping on CWS 6500 casements. Salt hardens the rubber after one hurricane season. The window still looks fine from inside, but it’s no longer sealing. Air and water get through the compressed strip.
- Hard-to-lift sashes on CWS 8000 units in beachfront condos. On 174th Avenue and similar Gulf-front buildings, the constant salt film loads up the balance channels with abrasive grit. Three years in, the window fights you. We replace the balances with factory parts and clean the jambs down to bare metal before reassembly.
CWS Service in Redington Shores: What Local Conditions Mean for Your Equipment
Redington Shores is one of the only Pinellas County towns where the Gulf-facing side of the same house and the Intracoastal side are both rated as Exposure D under ASCE 7. That matters for CWS owners because a window that passes wind-load review on one elevation can fail inspection on the other if the original permit treated the barrier island as uniformly protected. We learned to check both elevations separately. A CWS 7000 slider on the west wall carries a different anchoring requirement than the identical model on the east wall, which is why Redington Shores Door Installation requires the same elevation-specific approach. When we pulled a corroded CWS 7000 from a 1965 CBS bungalow on 163rd Avenue, the original rough opening had been cast 1-1/4 inches too narrow for any stock impact-rated CWS unit. That jalousie-era cut is common throughout Redington Shores. Our crew hand-furred the block back to square, installed a custom-width CWS 8000 impact single-hung with stainless anchoring, and recalked the entire exterior opening with marine-grade polyurethane before the Gulf-side rain band hit.
CWS Models & Products We Service in Redington Shores
We service the CWS 8000 series single-hung aluminum windows, the CWS 7000 series horizontal sliders, the CWS 5000 series fixed and picture windows, and the CWS 6500 series casement windows. We use genuine CWS factory replacement parts where available, including balances, latches, and jamb liners. For corrosion-prone sill tracks and hinges, we upgrade to stainless steel or marine-grade aftermarket components without voiding the window’s structural rating. If a frame is pitted through or the glass unit has lost its argon fill, we recommend replacement rather than patching. Most Redington Shores CWS frames older than fifteen years are not worth rebuilding. As part of our broader CWS sales & service work, we stock common CWS parts in our local warehouse so Redington Shores turnaround stays tight.
CWS Service Pricing in Redington Shores
- Service call and diagnostic: maintenance check covers a full hardware and seal inspection, plus minor adjustments.
- CWS 7000 slider partial rebuild (rollers, latches, weatherstripping, stainless sill track): typically $180 to $340 per window, depending on track length and corrosion depth.
- CWS 8000 balance and jamb liner replacement: typically $140 to $260 per sash, including factory balances and reclean of the channels.
- Full frame replacement with impact-rated CWS unit (including permit and code-compliant anchoring into CBS): typically $1,800 to $3,600 per opening, depending on rough-opening condition and any infill required.
- Senior and veteran discount: permanent 5% off, applied to any line item.
What changes the price in Redington Shores is the masonry. Older block openings cast for jalousies often need custom-width units or infill work before any new frame anchors properly. That hidden cost surprises buyers who priced the job on square footage alone. We give you a written line-item quote that names the exact model, the anchoring method, and the permit fee before any work starts. Call (813) 320-9346 and we’ll walk the job with you. Estimates are free.
Serving Redington Shores, FL - Our Local Coverage Area
We’re based in the Redington Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Redington Shores
The glass is rarely the problem. In Redington Shores, the standard cause is either a failed corner seal or a clogged weeping channel that was designed to drain water but has filled with salt sediment and corrosion debris. The water backs up and spills over the interior track. We clean the channels, replace the corner seals, and if the sill track is pitted, we swap in marine-grade material. Call (813) 320-9346 if you’re seeing water. It never gets better on its own.
Almost never. The jalousie frames in Redington Shores’ older CBS homes sit in rough openings that were cast for a completely different frame profile. The glass louvers themselves carry no impact rating. We can sometimes install a custom-width CWS 8000 impact single-hung into an existing jalousie opening if the block is sound, but the frame, glazing, and anchoring all need to be replaced. We’ll tell you straight what will pass inspection and what won’t.
It is common for beachfront exposure, but that does not mean it is normal. Salt film and fine Gulf sand load into the balance channels, acting like abrasive paste every time the sash moves. Within a few years the balances wear out and the jambs are packed with grit. We replace the balances with CWS factory parts and clean the channels down to bare aluminum. Done right, the window lifts like new.
Yes, generally. Redington Shores sits entirely within Florida’s wind-borne debris region, and both the Gulf and Boca Ciega Bay sides fall under Exposure D rating under ASCE 7. That means any window replacement requires a permit and product approval documents, regardless of which side of Gulf Boulevard you’re on. We pull the permits, coordinate the inspections, and hand you the passed inspection record. Call (813) 320-9346 if you want us to confirm what applies to your specific address.
The rough opening. The original jalousie frames were cast into block that an installer will often find undersized or out of square for any stock impact-rated unit. You either order custom-width windows or pay for infill masonry before the new frame anchors properly. We catch this during the site measure and price it into the written quote, so it’s not a discovery after demo. Estimates are free, and we put everything in writing. If it needs to be in writing to be true, we will put it in writing.
Service Areas Near Redington Shores
We work across the Gulf barrier communities and the wider Tampa Bay area. If you’re in Redington Shores, you’ll see our trucks regularly. We also serve Riviera Beach, Royal Palm Beach, Anna Maria, Apollo Beach, and nearby Pinellas and Hillsborough communities. For CWS work south of here, see CWS service in Riviera Beach and CWS service in Royal Palm Beach. If you’re not sure whether we cover your street, call and ask. A live person answers. We’ll be there when we say.
Book Your CWS Service in Redington Shores Today
We inspect, quote, and schedule CWS repairs and replacements across Redington Shores every week. Call (813) 320-9346 and you’ll speak with a person, not a voicemail tree. We’ll measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. That is a square deal, and we stand behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Redington Shores since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.