Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Tequesta, FL | TruePane Windows & Doors
We’re TruePane Windows & Doors, an independent CWS service provider working throughout Tequesta, and we handle everything from fogged CWS 8000 Series glass to full impact-rated replacements on the village’s older CBS ranch homes. What makes our CWS work different here comes down to one thing: we’re already registered with the Village of Tequesta’s own building department, so permits don’t stall. If your CWS windows need attention, call us at (813) 320-9346 for a free estimate on our Window Installation in Tequesta.
Why Tequesta Residents Choose Us for CWS Service
Dale Kessler founded this company in 2008 after years of seeing out-of-true installs and voided warranties on coastal Florida homes, and he built our CWS service approach around a simple rule: if the pane is not true, the job is not done. Our crews have spent years replacing and servicing CWS windows and doors in Palm Beach County’s salt front villages, and we regularly see how CWS aluminum frames and hardware behave under Tequesta’s specific bi-directional salt air, independent of any manufacturer authorization. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. That is The Keystone Standard, and it applies to every CWS job we take in Tequesta, from a single roller replacement to a full frame swap.
Common CWS Windows & Doors Problems We Solve in Tequesta
Tequesta’s position at the mouth of the Jupiter Inlet means CWS units here face conditions that Palm Beach Gardens units rarely see. Here are the five most common problems we address:
- White oxidation on exterior aluminum frame faces. CWS jalousie and first-generation single-pane units within 500 yards of the Intracoastal develop a chalky white powder that signals frame corrosion. Left alone, it spreads under the glazing bead and compromises the seal.
- Failed corner seals and fogged insulated glass on CWS 8000 Series. The frames often look intact, but the dual salt fronts (Atlantic on one side, Intracoastal on the other) accelerate seal failure. We see fogged 8000 Series units in Tequesta that are five to eight years younger than identical units failing inland.
- Corrosion and pitting on CWS roller tracks and latch hardware. Constant salt spray off Jupiter Inlet eats standard hardware. We replace worn CWS rollers with marine-grade stainless or corrosion-resistant aftermarket inserts that outlast the originals in this environment.
- Bent or seized original CWS jalousie operator arms. On Tequesta’s 1960s to 1980s CBS ranch homes, seized operators prevent full closure, and that is an immediate red flag on Village wind mitigation reports. We rebuild or replace the operator mechanisms so windows close tight and latch.
- Water intrusion at sill corners during summer downpours. Tequesta’s afternoon thunderstorms push water against west-facing CWS frames, and degraded sill flashing channels it inside. We rework sills and reseal openings to stop it at the source.
CWS Service in Tequesta: What Local Conditions Mean for Your Equipment
Tequesta is a narrow peninsula village surrounded on three sides by salt water: the Loxahatchee River to the north, the Intracoastal Waterway to the west, and the Atlantic near Jupiter Inlet to the east. That geography creates something measurable: bi-directional salt-air corrosion on window and door frames that is worse than what you would find in Jupiter or Palm Beach Gardens, because those communities do not sit between two salt sources the way Tequesta does. For CWS owners, this means the aluminum frames and hardware on your windows age faster here than the manufacturer’s typical service timeline assumes. We recently replaced a set of original CWS jalousie windows on a 1970s CBS ranch off Country Club Drive in Tequesta, where the frames had white oxidation and two operator arms were seized. After removing the jalousies, we reworked the masonry openings, installed impact-rated CWS fixed and awning units, and rebuilt the sills to pass the Village wind mitigation inspection on the first visit. That job is the pattern for how we approach CWS work in this village: understand what the salt is doing, correct the opening, and install something that holds up.
CWS Models & Products We Service in Tequesta
We service the full range of CWS residential product lines you are likely to find in Tequesta homes, from the older jalousie units on original ranch builds to newer custom waterfront installations. That includes the CWS 8000 Series aluminum single hung, the 4000 Series horizontal rolling window, the 6000 Series casement window, and CWS Impact Sliding Glass Doors. When parts are available, we source OEM CWS gaskets, rollers, and hardware. For marine-grade stainless fasteners and corrosion-resistant track inserts, we use quality aftermarket components that outlast what CWS originally installed in Tequesta’s salt air. We stock common CWS rollers, gaskets, and hardware locally so most single-visit repairs in Tequesta do not wait on a parts truck from out of county.
CWS Service Pricing in Tequesta
Here is what CWS window and door service typically runs in Tequesta. These are working ranges, not quotes; your final number depends on the specific unit, the damage, and whether you are repairing or replacing.
| Service | Typical Range in Tequesta |
|---|---|
| CWS window service call and diagnosis | $75 to $125 |
| Roller or track replacement on a CWS sliding unit | $110 to $220 per panel |
| Fogged insulated glass replacement (CWS 8000 Series) | $280 to $520 per sash |
| Jalousie operator arm rebuild or replacement | $95 to $185 per operator |
| Full-frame CWS impact window replacement | $850 to $1,600 per opening |
| Full-frame CWS impact sliding glass door | $2,400 to $4,800 |
What drives cost in Tequesta specifically: proximity to the salt fronts (which accelerates frame pitting), whether the opening needs masonry rework on older CBS homes, and whether we are matching existing CWS lines or moving to a full-frame impact-rated replacement. Every estimate is free, and it includes a written line-item quote so you see exactly what you are paying for. Call us at (813) 320-9346 to schedule one; no second appointment left hanging.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Tequesta
Yes. Under the Florida Building Code as enforced through the Village of Tequesta’s own permit process, any glass replacement in an existing frame must meet current impact standards if the opening is required to be protected. You cannot put non-impact glass into a frame that sits in a wind-borne debris region without triggering compliance issues. Replacing only the glass in a non-impact CWS frame does not satisfy code; if the frame is not rated for impact, full-frame replacement is the honest path. Call us at (813) 320-9346 to have us look at your specific frames and give you a straight answer on what is required.
That white powder is aluminum oxidation, and in Tequesta it appears faster than anywhere else in northern Palm Beach County because the village sits between two salt sources, the Intracoastal to the west and the Atlantic to the east. The salt air settles on the frame, and over time the anodized or painted finish breaks down. Three blocks from the Intracoastal is close enough for daily salt spray, especially during the summer onshore wind pattern. If the oxidation is surface-level, we can clean and reseal the frames. If it has pitted the aluminum or crept under the glazing, replacement becomes the smarter spend.
If the track is intact and the frame is not deeply corroded, yes, we can replace the rollers. We stock CWS-compatible rollers and track inserts locally, and we use marine-grade aftermarket rollers on Tequesta doors because the originals pit quickly in this environment. But we will tell you plainly: if the frame shows deep pitting, or the door is a non-impact unit on a waterfront home, repairing rollers is throwing good money after a unit that needs to come out. Full-frame our Door Installation in Tequesta for CWS impact sliders is a better long-term spend in this village. The estimate is free either way.
You need a Village of Tequesta permit, not a Palm Beach County permit. Every CWS window and door permit in Tequesta runs through the Village’s own building department, which requires separate contractor registration with the municipality. Out-of-area companies routinely miss that step, and their permits stall. We are already registered with the Village, so a CWS replacement here does not wait on that paperwork. That registration is one of the quiet advantages of using a local contractor. Call (813) 320-9346 and we will walk you through what the permit covers and what it costs.
Spring in Tequesta brings high humidity and higher salt content in the air, and the combination makes CWS casement operator arms and hinges bind. The salt acts as an abrasive on the hardware, and the humidity causes the aluminum to swell slightly at the hinge points. Winter’s drier air masks the problem. The fix is usually cleaning and lubricating the operator mechanisms, but if the arms are pitted or bent we replace them. Waiting makes it worse, because a window that will not close is a wind mitigation failure on your next inspection. Get it addressed before storm season; estimates are free.
Service Areas Near Tequesta
Our CWS service coverage extends beyond Tequesta into the surrounding communities. We work in Jupiter, Jupiter Inlet Colony, Juno Beach, and Palm Beach Gardens, as well as the unincorporated pockets along the Intracoastal between Tequesta and North Palm Beach. If you are in one of those areas and need CWS windows or doors looked at, we are familiar with the local permit offices and the salt-air conditions that shape the work. You can see more on our Tequesta service area page, or look at our CWS sales & service overview. We also run CWS service in CWS service in Treasure Island and CWS service in Umatilla for our neighbors on the Gulf side and inland.
Book Your CWS Service in Tequesta Today
If your CWS windows are fogged, oxidized, corroded, or simply not closing the way they should, we will send a uniformed, background-checked technician to Tequesta to assess the work and hand you a written quote. Call (813) 320-9346 now. We stand behind the work in writing, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tequesta since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.