Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Door Installation: The Tampa Owner’s Guide
We stock and install Simonton-compatible door hardware, panels, and complete door units throughout Tampa, with installed pricing typically running $185 to $620 depending on the part and whether we’re repairing or replacing the full assembly. Most Simonton door work in Tampa is completed the same day we arrive because our trucks carry the common failure points for Simonton sliding and hinged patio doors. The call usually starts with a door that drags, a lock that won’t catch, or a roller that sounds like gravel in a can. By the time a Tampa homeowner reaches for the phone, that door has been fighting them for weeks.
Which Simonton Models This Applies To
Simonton’s patio door lines most common in Tampa are the 6500 and 7500 series sliding doors, plus the hinged patio door units that share hardware with those frames. Identifying what you have is straightforward: open the door and look at the inside edge of the frame where the lock sits. Simonton stamps a series number and a manufacturing date code there on most units built after 2000. If the sticker is gone, a photo of the lock cutout and the roller housing sent to our office is usually enough for us to match the part before we even schedule the truck.
One compatibility gotcha worth knowing: Simonton changed its roller housing design between the 6500 and 7500 series, and the rollers are not interchangeable between them. A 6500 roller in a 7500 track will bind, chew the track, and ruin a door that was otherwise fine. On the OEM-versus-aftermarket question, we stock both. The Simonton-branded parts are what we recommend for anything under warranty. For out-of-warranty doors, several aftermarket roller assemblies we carry actually outlast the originals in Tampa’s humidity because they use sealed stainless bearings instead of zinc. We’ll quote both on paper and let you decide with the numbers in front of you.
Signs Your Simonton Door Installation Is Failing
- The door takes real effort to move. This is almost always a roller that has flattened or seized. Simonton rollers use a nylon wheel that eventually develops a flat spot, and every open and close after that drags the flat edge across the aluminum track.
- The lock or latch no longer lines up. When rollers wear, the door panel drops a quarter-inch or more. The lock tongue then scrapes against the keep rather than seating cleanly. Tightening a lock that’s fighting misalignment just bends the hardware.
- The door rattles in its frame when Tampa afternoon storms blow through. Loose rollers let the panel bounce in the track. That movement wears the weatherstripping unevenly, and the rattling you hear is the panel working against the frame.
- The track shows scoring or bright metal flecks. A seized roller that’s been dragged creates grooves in the soft aluminum track. Once the track has deep scoring, new rollers alone won’t fix the door. The track needs to be evaluated for replacement or re-surfacing.
- Condensation or haze between the glass panes. Simonton’s insulated glass units lose their seal over time, and Tampa’s heat and humidity accelerate that. A fogged panel means the glass unit itself has failed, not just the hardware.
Replacement Cost & What’s Included
Installed roller replacement for a Simonton sliding door in Tampa runs $185 to $340, depending on whether it’s a single or double panel and which series you have. Complete lock and latch replacement runs $120 to $260 installed. A full glass panel replacement, when the seal has failed, runs $450 to $620 installed. The range reflects some real variables: whether your track is still serviceable, whether we’re matching Simonton OEM or a sealed-bearing aftermarket part, and panel size.
Every quote we write includes the part, the labor, and the adjustment. No separate trip fee, no diagnostic charge that gets tacked back on. The work is covered by our 90-Day Done Right Promise, and if your Simonton door is still under the manufacturer’s warranty, we register the replacement part in writing before we leave the driveway. That’s The Keystone Standard we’ve held since Dale Kessler put the company’s name on the first truck in 2008.
DIY or Call Us?
There are things an owner can safely check: whether the track is packed with sand and grit from Tampa’s dry season, whether the screws on the lock faceplate have loosened, whether the door is visibly out of level. Cleaning the track and snugging the faceplate screws is fine to do yourself.
What goes wrong for homeowners is the roller swap. Simonton sliding door panels are heavy, the adjustment screws are often corroded in place from Florida humidity, and improperly set rollers will destroy a track faster than the old worn ones did. We’ve repaired more than a few DIY attempts where the owner got the panel halfway out and then couldn’t get it back in without help. If the door is binding, sagging, or howling when it moves, call us at (813) 320-9346. We’ll bring the right rollers and the right track tools, and the job gets done the same visit.
FAQs
Most Simonton rollers in Tampa last 8 to 12 years before they flatten or seize, though doors facing direct afternoon sun with heavy daily use can wear them out in 5 to 7 years. Humidity salt from Tampa’s coastal air shortens that further without regular track cleaning.
Yes, and repairs are what we do most often. Rollers, locks, weatherstripping, and glass panels are all replaceable on Simonton doors, and repairing a door runs far less than a full replacement unit. We’ll recommend replacement only when the frame or track is damaged beyond what new hardware can fix. Call (813) 320-9346 for an honest assessment.
Most Simonton roller and lock replacements take 45 to 90 minutes on site. A full glass panel replacement takes two to three hours including cleanup. We schedule the work and complete it the same visit.
We stock Simonton roller assemblies, lock sets, weatherstripping, and the common track profile parts on our service trucks, so most jobs are done the same day we arrive. For less common parts, we order directly and return within the week. TruePane Windows & Doors is an independent service provider, not affiliated with Simonton, and we also stock parts for Andersen, and Pella door lines.
If your Simonton door is giving you trouble, call (813) 320-9346 for a free estimate. We’ll quote it straight, put it in writing, and stand behind the work.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.