Frequently Asked Questions - Windows & Doors in Tampa, FL
Straight answers to the questions Tampa homeowners ask us most about window and door replacement, repair, pricing, and warranties. If you don't see your question here, call (813) 320-9346 and we'll talk it through.
Pricing & Cost FAQs
Window replacement in Tampa typically runs $450-$1,200 per window installed, with full-home projects on a 2,000-square-foot house generally landing between $8,000 and $24,000 depending on the window line, frame material, and whether you're replacing or doing a full tear-out. High-end lines like ES Windows or Andersen will sit above that on a per-unit basis. Impact-rated glass, which matters in hurricane country, adds cost but often reduces insurance premiums. We give written line-item quotes before any work begins, so the number we quote is the number you pay. Call (813) 320-9346 for a free estimate.
A new entry door in Tampa generally costs $1,200-$4,500 installed, with sliding patio doors running $1,800-$6,000 and French door systems $2,500-$8,000. The spread comes down to material: basic steel, fiberglass with a wood grain, solid wood, and whether the frame needs replacing or just the slab. Coastal homes in South Tampa and Apollo Beach often need corrosion-resistant hardware and impact glass, which pushes toward the higher end. Every quote we write lists materials and labor separately so you can see exactly what you're paying for. Call (813) 320-9346 and we'll price your specific door.
Yes, impact-rated windows and doors typically add 25-50% to the cost of conventional glass units in Tampa. The heavier laminated glass, reinforced frames, and additional hardware all contribute. What most homeowners in Tampa, Apollo Beach, and Aventura discover is that the investment is often partially offset by windstorm insurance discounts, and the protection value during hurricane season is real. We quote impact and non-impact options side by side on paper so you can make the decision with full numbers in hand. Call (813) 320-9346 for a comparative written estimate.
No. We quote fixed pricing with no change orders unless you ask us to expand the scope, and any change is re-quoted in writing before work continues. The only surprise on a TruePane job is that the final bill matches the estimate. If we open a wall and find rot or water damage, we'll stop, show it to you, explain your options, and give you a written number before we do anything else. That's the square deal. Call (813) 320-9346 to schedule your free estimate.
Service & Process FAQs
Most single-home window replacements in Tampa take one to three days for a crew to complete, with ten to fourteen windows being a common single-day job when access is clear. Full tear-outs with stucco repair or brick work extend that. Weather matters: Tampa's summer afternoon thunderstorms can pause an exterior job, but we work through it. We measure every opening twice before ordering, so the install itself moves fast. Before we start, you'll get a written timeline. Call (813) 320-9346 to schedule your free estimate and get a project plan.
We start with a free in-home consultation where Dale Kessler's team measures every opening, discusses your goals, and puts manufacturer lines side by side on paper so you can compare them honestly. Then you get a written line-item quote. Once you approve, we order the product, schedule your install, and show up when we say. The crew protects your floors, removes the old units, installs the new, and cleans up. Finally, we register both layers of your warranty before the truck leaves the driveway. Call (813) 320-9346 to start the process.
Yes, always. We measure every opening twice, not once, because an opening measured wrong produces a window that binds in July or leaks in a Tampa downpour. We measure at the consultation, then confirm measurements when we order. There's no charge for the measuring or the estimate. Dale Kessler's rule on the whiteboard predates the company itself: if the pane is not true, the job is not done. Call (813) 320-9346 and we'll come measure your openings.
In most cases, yes. Tampa has thousands of homes from the 1950s through the 1980s, and matching odd sizes, mullion patterns, and frame profiles is work we do regularly. For historic districts in Tampa proper, there may be architectural review requirements we help you navigate. When an exact match isn't available, we'll show you the closest options and explain the visual difference before you commit. We've handled this for homeowners in neighborhoods across Tampa, from old Seminole Heights bungalows to mid-century ranchers. Call (813) 320-9346 for a free consultation.
You can do either, but replacing all at once is typically more cost-effective in Tampa. Ordering a full home's worth of windows in one purchase often secures better per-unit pricing from manufacturers, and you only pay for one mobilization of the crew. Phasing is fine when budget requires it, and we'll help you prioritize the worst-performing rooms first. Just be aware that mixing old and new windows in one house means the old ones will look and perform worse by comparison. Call (813) 320-9346 to discuss your home and budget.
Brands & Parts FAQs
We quote manufacturer lines side by side so you can compare them honestly. Our line card includes ES Windows, ECO Window Systems, and Andersen. Each has strengths: Andersen brings decades of national reputation and service support, ES Windows offers premium aluminum and impact-rated lines well suited to Florida's coastal climate, ECO Window Systems balances solid construction with value is known for clean sightlines and modern profiles. The right answer depends on your home, your exposure, and your budget. Call (813) 320-9346 and we'll help you compare.
For hurricane protection in Tampa, impact-rated lines from ES Windows and Andersen are the ones we most often recommend. Both produce laminated glass systems tested to meet Florida's stringent building codes for windborne debris. Tampa code requires impact glass or shutters for new construction and major remodels, and many buyers choose impact glass for the insurance savings and the fact that it's always in place, no setup before a storm. We'll quote impact and non-impact options for the same opening so you can see the real difference. Call (813) 320-9346 for a comparative quote.
Sometimes. If the frame is solid and square, and the issue is a failed seal or cracked pane, replacing the insulated glass unit, or IGU, is possible with many vinyl and aluminum windows. If the frame is out of true, warped from Florida humidity, or leaking through the rough opening, a glass replacement won't solve the underlying problem and you're putting a new IGU into a frame that's still failing. We'll inspect and give you an honest recommendation either way. Call (813) 320-9346 for a free inspection.
Foggy windows mean the seal on the insulated glass unit has failed. In Tampa's heat and humidity, water vapor gets in between the two panes, and once the desiccant inside the spacer is saturated, the fog is permanent. It's rarely worth repairing; replacement of the IGU or the full sash is the fix. We see this most often on homes built in the 1990s and early 2000s, when many builder-grade sealed units used lower-quality sealant systems. If your windows fog in the morning and clear by afternoon, they're on their way out. Call (813) 320-9346 for an assessment.
Licensing & Insurance FAQs
Every pro working under our name is required to hold the license and insurance their state requires, and we carry the coverage appropriate for window and door installation in Florida. We're transparent about it: you can ask to see documentation before we start, and we'll provide it without hesitation. We also pull permits on every Tampa job that requires one and pass inspections before the job closes. That's part of the Keystone Standard. Call (813) 320-9346 to discuss your project and what permits it will need.
Yes, when the scope requires it. Tampa and Hillsborough County have specific permitting requirements for window and door replacement, particularly when the opening size changes or structural work is involved. We handle the permit application, schedule the inspection, and make sure the inspectors sign off before we consider the job finished. Some simple same-size replacements are exempt, and we'll tell you honestly where your project falls. Permits protect you as much as they satisfy the county. Call (813) 320-9346 to find out if your project needs one.
We use a local crew trained in our methods and standards, and every pro working under our name is required to hold the license and insurance their state requires. That's a requirement, not a preference. Dale Kessler built this branch around craftspeople who share the Keystone Standard: krafted right, every time, your home first, standing behind it. We don't cut corners on who touches your home. Call (813) 320-9346 and we'll walk you through what to expect from our crew.
Emergency & Response FAQs
First, stay clear of the glass and keep children and pets away. If water is coming in, move valuables and use towels or a tarp to contain it without touching the broken pane. For a temporary barrier, heavy plastic sheeting secured from the inside works until a professional can board it properly. Broken window glass is sharp and unpredictable; we recommend letting a trained installer handle the removal and replacement. Call (813) 320-9346 during our business hours, Monday through Friday 7:00 AM to 8:00 PM and weekends 7:30 AM to 7:00 PM, and we'll get you on the schedule.
We prioritize urgent requests within our regular business hours, which are Monday through Friday 7:00 AM to 8:00 PM, Saturdays and Sundays 7:30 AM to 7:00 PM. If you've got a broken pane or a door that won't close and you call us at (813) 320-9346, we'll make space in the schedule as quickly as we can. A broken window or jammed entry door is a security issue, and we treat it that way. For severe storm damage affecting the building envelope, you may need temporary board-up service first; we can advise on that too.
Most stuck sliding glass doors in Tampa can be fixed. The usual culprits are worn rollers, dirt and debris in the track, or a door that has settled out of square. In a humid climate, aluminum tracks also corrode over time. We'll inspect, tell you if it's a repair or a replacement, and quote you a straight number. Sometimes a new door is the better long-term call if the frame has sagged or the glass is original to a 1980s home. Call (813) 320-9346 and we'll get you moving again.
Warranty & Guarantees FAQs
Every TruePane job carries the Keystone Standard: both warranty layers in writing, durations stated, 90 days on our workmanship, no arguing. The two layers are the manufacturer's warranty on the product and our warranty on the installation. We register both in writing before the truck leaves your driveway, and we give you the paper copies, not just a verbal promise. Manufacturer warranties vary by brand and line, and we'll spell out the actual terms for the exact products you choose. If something's not right, we come back. Call (813) 320-9346 for details on your project.
Our 90-day workmanship warranty covers the installation itself: caulking, flashing, trim fit, hardware alignment, and any adjustment needed because something wasn't done right the first time. It comes in writing, and there's no paperwork and no arguing if you call us with an issue. The manufacturer's warranty covers the product: glass seals, frame defects, hardware failures. We register both layers for you, so when a seal fails in year six, the pathway to a replacement is already documented. Call (813) 320-9346 to talk warranty specifics for your chosen products.
Call us first. Even if your install was years ago, we keep records and we know how to file the manufacturer claim properly. The first step is figuring out whether the issue is a manufacturer defect or an installation concern; we determine that with an inspection. If it's the product, we submit the claim with the documentation we registered at install. If it's our work and you're within 90 days, we fix it, no arguing. Outside that window, we'll still tell you honestly what it will take to make it right. Call (813) 320-9346 and describe what you're seeing.
Many manufacturer warranties do transfer to a new homeowner, usually with a deadline and sometimes a small transfer fee, but the terms differ significantly by brand. Andersen, for example, has a transferable limited warranty on many lines, while other manufacturers limit transferability. We register your warranty in writing at install and provide documentation that makes any transfer easier when you sell. Buyers in Tampa ask about windows, especially impact-rated ones, and documented warranty coverage is a selling point. Call (813) 320-9346 and we'll walk you through the transfer process for your specific products.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tampa since 2008.
Still Have Questions?
We are happy to help. Call us - same-day and after-hours emergency service available.
(813) 320-9346