Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across High Point
Custom High Point Door Installation and window work usually starts with one question: can the original jalousie windows in a 1970s manufactured home actually be fixed? In most cases, no. Pinellas County’s wind-zone requirements mean single-pane louvered glass cannot be brought into Florida Building Code compliance with repairs alone, so what begins as a repair estimate becomes a full replacement. We know this because we’ve opened enough High Point walls to see what’s really behind them. If you’re weighing your options, call (813) 320-9346 and we’ll walk you through it over the phone, not a callback form.
Why TruePane Windows & Doors Is High Point’s Preferred Custom Windows & Doors Company
High Point homeowners tend to do their homework before letting anyone touch their windows. They’ve lived in the community for a long time, and they’ve seen what happens when a contractor treats a manufactured home like a stick-built house three towns over. We approach every Custom Windows & Doors job in High Point the same way Dale Kessler laid out in 2008: if the pane is not true, the job is not done. That means measuring every opening twice, checking the framing before ordering glass, and registering both manufacturer warranty layers in writing before our truck leaves your driveway.
We hold a strong local reputation across Pinellas County, and the work we do in High Point reflects that. Homeowners off Pine Ridge Drive, Ridge Road, and the streets around the community center call us because our technicians arrive in uniform, background-checked, and ready to explain what the permit process will require. The 90-Day Done Right Promise applies to every job, from a single jalousie replacement to a full-home window package. If it’s not done right, we make it right. No paperwork fights, no arguing.
Our Custom Windows & Doors Services in High Point
Impact-Rated Glazing
The Gulf Coast wind zone that covers High Point means most High Point Window Replacement jobs here involve impact-rated glazing, not standard glass. We quote manufacturer lines side by side on paper so you can see the difference in laminate thickness, frame material, and warranty duration. Most High Point jobs we complete in a single visit, and the permit paperwork is handled before the first pane comes out.
Custom Shape Windows
Not every opening in a manufactured home is a standard rectangle. Some High Point homes have arched transoms, angled gable windows, or trapezoid openings added during renovations in the 1980s and 1990s. Our Custom Windows & Doors shop cuts and orders custom shape windows to match those openings exactly, rather than framing down to a smaller stock unit. That keeps the original character of the home without sacrificing impact compliance.
Architectural Grilles & SDLs
Homeowners in High Point who upgrade from jalousie windows to double-hung or casement styles often want the look of divided light without the maintenance of true muntins. Simulated divided lites, or SDLs, give you that traditional Florida look while keeping the exterior glass surface smooth and easy to clean. We order SDL patterns through Andersen, Pella, and Marvin, and we’ll show you samples before you commit.
Commercial Storefront Glazing
High Point’s community buildings and small commercial storefronts occasionally need glazing work too. Our commercial storefront glazing service covers aluminum storefront systems, entry doors, and glass replacement. The same Keystone Standard applies: both warranty layers registered in writing, and a live person answers the phone if something goes wrong.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in High Point
We’re an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, and Marvin. What that means for High Point customers is simple: when we order a window, the warranty is real, registered, and backed by a company that will still be here in thirty years. We keep common hardware and replacement parts in local stock for faster turnaround on repairs, and we quote side by side so you always know what you’re paying for. No brand games, no “trust me” pricing.
Common Custom Windows & Doors Problems We See in High Point Homes
- Corroded and seized jalousie frames: Decades of salt-laden air from Tampa Bay wrecks the thin-gauge aluminum frames common in 1970s and 1980s manufactured homes. The sashes bind, the cranks strip out, and the window refuses to open or close without force.
- Single-pane glass with zero impact resistance: The original louvered glass in most High Point homes fails Pinellas County wind-zone requirements outright. Repairs don’t solve the code problem, which is why almost every jalousie repair estimate here becomes a full replacement.
- Rotted wall framing and failed flashing: Once a jamb is pulled from an aging manufactured home, we often find moisture intrusion that rotted the particleboard subfloor or weakened the header. Undersized headers from the original build are common, and they must be corrected before new windows go in.
- Poorly sealed replacement windows from previous contractors: Some High Point homeowners have already replaced jalousies once, but with units that were never properly flashed or sealed against Florida humidity. Fogged glass, binding sashes, and visible daylight around the frame are telltale signs.
Pricing for Custom Windows & Doors in High Point, FL
A single impact-rated replacement window in High Point typically runs $900 to $1,800 installed, depending on size and frame material. Replacing all jalousie openings in a standard two-bedroom manufactured home with double-hung impact windows usually falls between $8,500 and $16,000. Custom shape windows add 30 to 50 percent over a standard rectangle due to templating and fabrication. Architectural grilles or SDLs add $150 to $400 per window. If we open a wall and find rotted framing, a typical change order runs $200 to $600 per opening. Call (813) 320-9346 for a free estimate, and we’ll put every number in writing before you sign anything.
We Also Serve Cities Near High Point
TruePane crews serve High Point and the surrounding Pinellas County communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re a few miles outside the community gates, we still answer the phone 24/7 and schedule estimates the same way. Our Custom Windows & Doors in High Point page covers this community specifically, but the workmanship standard follows us everywhere.
Serving High Point, FL - Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in High Point
Jalousie windows almost always need full replacement in High Point because Pinellas County’s wind-zone code requires impact-rated glazing that jalousie frames simply cannot support. The original thin-gauge aluminum frames were never engineered for laminated impact glass, and thirty-plus years of salt air has corroded the tracks to the point where new hardware would sit crooked in a ruined frame. Call (813) 320-9346 and we’ll confirm whether repair is even worth the quote.
Pinellas County requires a permit for any window replacement that changes the rough opening size or alters the structural framing, and it requires the new window to meet current Florida Building Code wind-zone standards for impact resistance. That means impact-rated glazing or an approved shutter system in most cases. We pull permits, schedule inspections, and make sure the paperwork is closed out before we call the job done.
You’ll know the corrosion has failed your windows when the sashes bind mid-crank, the edges of the frame show white or chalky powder, or the glass rattles in the channel even when fully closed. In High Point’s salt-laden air, these failures typically start within 10 to 15 years and accelerate once the anodized coating is breached. If you see any of that, it’s time to call (813) 320-9346 for a free inspection.
In many manufactured homes, yes. Double-hung and casement windows can be ordered in sizes that fit existing rough openings, especially if the original was a standard 48-inch or 60-inch jalousie unit. But if the framing is undersized or rotted once we open the wall, the rough opening may need modification, and that’s exactly the kind of surprise we write into a change order and get approved in writing before touching anything. Call (813) 320-9346 for a line-item quote.
If we open a High Point wall and find rotted framing or missing flashing, we stop, document what we found, and write a change order for the corrective work before proceeding. You approve every dollar in writing before we touch it. The 90-Day Done Right Promise covers the replacement work, and the framing correction gets the same treatment: measured twice, installed true, and warrantied in writing.
We replaced a set of corroded jalousie windows on a home off Pine Ridge Drive in High Point, where salt-laden air from Tampa Bay had seized the aluminum tracks and the original single-pane glass offered no hurricane-impact resistance. After opening the wall, our crew found undersized framing and failed flashing tape, so we wrote a change order for new pressure-treated jamb extensions and impact-rated glazing before proceeding, all approved in writing by the homeowner.
That sequence, jalousie removal, framing correction, permitted Impact Windows & Doors - High Point installation, is the part a generic window page never mentions. In High Point, it’s the difference between a window that looks right for one season and a window that holds up under a Gulf storm and a Pinellas County inspection. If you want it done right the first time, call (813) 320-9346 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving High Point with the standard that if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.