Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Lakewood Park
Custom window and door work in Lakewood Park usually starts with a discovery that changes the scope. The post-2004 insurance-funded replacements that went into hundreds of CBS block homes here were rushed, and many were set into unflashed openings. Water has been working its way into the stucco-to-block interface ever since. That’s the job we’re known for correcting. TruePane Windows & Doors is a second-generation glazier’s shop that treats every custom window and door as a craft commitment, not a transaction. If you’re in Lakewood Park and want a set of windows or a door that will still be true a decade from now, call (813) 320-9346. A live person answers, day or night.
Why TruePane Windows & Doors Is Lakewood Park’s Preferred Custom Windows & Doors Company
We’re a Florida company, run by a second-generation glazier named Dale Kessler, who founded this shop in 2008 with one rule on the whiteboard: if the pane is not true, the job is not done. That rule has carried us through more than years of combined service in communities like this one, and it’s the first thing our crews talk about when they show up to a Lakewood Park home. We hire local, train apprentices into journeymen, and work like a company that plans to be here when the next storm season rolls through.
Every technician we send into a Lakewood Park house is background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you’re buying and what each layer of warranty covers. And before the truck leaves your driveway, both manufacturer warranty layers are registered in writing, with durations stated. That’s The Keystone Standard, and it’s non-negotiable with us.
Our reputation in this stretch of St. Lucie County is built on the 90-Day Done Right Promise. If something isn’t done right, we make it right. No paperwork fights. No arguing. We stand behind it.
Our Custom Windows & Doors Services in Lakewood Park
Custom Shape Windows for CBS Openings
Lakewood Park is full of concrete block homes built between the 1970s and early 1990s. The opening sizes and shapes on those houses don’t always match what’s sitting on a supply house shelf. A true custom window in a CBS wall means the rough opening gets re-bucked properly, not just caulked up and covered. We see far too many post-2004 retrofits that skip this step, which is exactly why water intrusion at the frame-to-block interface is now a chronic problem in this community. Our custom shape work always starts with a proper inspection.
Commercial Storefront Glazing
For the storefronts and small commercial spaces around the Kings Highway corridor and the main roads that cut through unincorporated Lakewood Park, we handle storefront glazing with the same discipline we use on a kitchen window. Salt-laden air from the Atlantic, 10 to 15 miles east, corrodes aluminum framing and hardware fast. When we reset storefront glass, we specify hardware that’s built for a marine environment, not the inland-spec components that start pitting within a few years.
Curtain Wall Systems
Larger commercial curtain wall work in this part of St. Lucie County has to account for the wind-borne debris region designation. Every replacement window and door here must meet impact-rated glazing standards or approved storm protection. We order curtain wall systems accordingly, and we’re an authorized installer for more than a dozen manufacturer lines, including ES Windows and Andersen. You get a written side-by-side quote so the spec is clear before anything gets fabricated.
Architectural Grilles & SDLs
Many of the original 1970s CBS homes in Lakewood Park came with simple colonial grilles or true divided lites that gave the streetscape a certain character. We fabricate architectural grilles and simulated divided lites, or SDLs, on marine-grade frames that will not chalk white at the corners within five years. For a homeowner on Lakewood Drive or along Indrio Road who wants to keep the original look while upgrading to modern impact glass, that means you don’t have to choose between curb appeal and code compliance.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lakewood Park
We work directly with a carefully chosen set of manufacturers, because the wrong aluminum frame fails early in this climate. Among the lines we specify for Lakewood Park homes are ES Windows, Marvin, and Andersen, along with impact-rated lines built for Florida exposure. For replacement parts and hardware on existing Custom Windows & Doors jobs, we keep common components in local stock, which means a repair on a Tuesday doesn’t wait a week for a parts truck from Orlando. Fast turnaround, and the person who answers the phone can actually tell you where the part stands.
Common Custom Windows & Doors Problems We See in Lakewood Park Homes
- Frame-to-block water intrusion from unflashed post-2004 retrofits. The rush after Hurricanes Frances and Jeanne in September 2004 put thousands of replacement windows into CBS openings without proper flashing tape at the jamb-to-block interface. The water wicks into the stucco for years before anyone sees the stain.
- Salt-air oxidation eating aluminum corners. Lakewood Park sits close enough to the Atlantic that unprotected aluminum frames develop a white, powdery crust at the jamb corners. The sash starts to bind, and eventually the corner joint fails entirely.
- Hollow-core thresholds wicking ground moisture. Many CBS homes sit on slabs, and a hollow-core door threshold sitting directly on that slab acts like a sponge. The bottom rail swells, the door drags across the tile, and the weatherstrip tears away.
- Simultaneous seal failure in post-2004 single-pane replacements. Those cheap windows are now 18 to 20 years old, all aging at once. Fog between the panes means the argon is gone and the U-factor is shot, right at the moment the county’s wind-borne debris code demands full replacement.
Pricing for Custom Windows & Doors in Lakewood Park, FL
A properly flashed, impact-rated custom window in a Lakewood Park CBS home typically runs $900 to $1,800 per opening, including removal, re-buck work, flashing, installation, and trim. A custom architectural door with marine-grade hardware and a properly sealed threshold runs $2,500 to $5,500 depending on glass package and configuration. A full-house window replacement on a 3-bedroom CBS block home here usually lands between $14,000 and $32,000. The big variable is whether the old unit was flashed correctly in the first place. If we find water intrusion at the block interface, the re-buck work adds time and material, but skipping it means you’ll be paying for the same failure inside ten years. Call (813) 320-9346 for a free estimate, and we’ll put every line item on paper before any work begins. We also offer a $50 discount on any repair over $250, a maintenance check, and a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Lakewood Park
Our crews serve Lakewood Park and the nearby communities of Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just outside Lakewood Park and need a custom window or door looked at, give us a call. Scheduling and dispatch are coordinated from our South Florida office, and local crews handle the work in your area.
Serving Lakewood Park, FL - Our Local Coverage Area
We’re based in the Lakewood Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Lakewood Park
The stain is almost always coming from a failed or missing flashing detail at the frame-to-block interface, not from the window itself. Post-2004 retrofits were frequently set without flashing tape, so rainwater running down the stucco gets pulled into the gap during heavy rain events. In dry months the entry point dries out and the stain fades, which is exactly why homeowners report it only during the rainy season. The fix is full removal, a proper re-buck, and new flashing, not just a bead of caulk along the top. Call (813) 320-9346 and we’ll find the entry point before it rots the block.
Accordion shutters can satisfy St. Lucie County’s wind-borne debris requirements for storm protection, but they don’t do anything for seal failure, frame corrosion, or U-factor the rest of the year. If your shutters are intact and you’re only worried about hurricane code, you may be able to install non-impact windows. But if those windows are the original single-pane units or the fogged post-2004 replacements, you’re paying an energy penalty every month, and the shutters don’t fix that. A full replacement with impact-rated glazing gives you protection even when you’re not home to close the shutters. For an exact quote on either route, call (813) 320-9346.
That white, chalky crust is oxidation from salt-laden air moving in off the Atlantic, and it’s accelerated on unwashed frames. Once the oxidation eats through the paint or anodized finish at a corner joint, the aluminum underneath begins pitting, and the structural integrity of the corner fails. On a post-2004 retrofit with sub-spec aluminum, this can happen in under a decade. We specify marine-grade finishes and stainless hardware on any frame that’s going to live in this stretch of the Treasure Coast. If you’re seeing that powder, the window’s life is measured in seasons now, not years. Call (813) 320-9346 and we’ll assess it in person.
The cheap window was bought off a shelf, set into an unflashed opening, and installed in under an hour by a crew working through an insurance claim backlog. Our custom window starts with a full inspection of the rough opening, a proper re-buck where needed, marine-grade flashing, a fusion-welded frame from a manufacturer line we’ve chosen, and both warranty layers registered in writing before we leave. The price difference is real, but so is the service life. One is a five-to-ten year window here. The other is a twenty-plus year window. For a written side-by-side quote on your exact openings, call (813) 320-9346.
Yes. We fabricate architectural grilles and SDLs that replicate the divided-lite look of the original 1970s units, and we set them into marine-grade frames that meet current St. Lucie County impact requirements. The key is doing the re-buck properly so the new window seats square in the block opening, which is something the 1970s build never had to contend with. We’ve done this on homes along Kings Highway, through the neighborhoods off of Indrio Road, and across the older streets of unincorporated Lakewood Park. Call (813) 320-9346 and we’ll bring samples to your door.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lakewood Park and the surrounding Treasure Coast communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.