Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across North Palm Beach
Custom window and door work in North Palm Beach starts with a hard truth: most openings in this village were framed in the 1950s and 1960s for jalousie and single-pane aluminum, and neither product survives here long. Salt air comes at your house from two directions, off the Intracoastal to the east and up the canal fingers that thread through the Country Club plat. A replacement job here isn’t a sash swap. It’s usually a full opening demolition, a re-buck, and a coastal-spec install. That’s the work we do. Call (813) 320-9346 and we’ll come look at your openings, not a brochure.
TruePane has been setting windows and doors in Florida long enough to know that North Palm Beach punishes the wrong material choice within three to five years. If you’re on a canal-side street off Lighthouse Drive or near the Country Club, the standard inland window spec that works fine in Orlando will corrode, fog, and bind on you before the warranty has even registered. We write both warranty layers in ink before the truck leaves your driveway, and we stand behind the work for 90 days under the Done Right Promise. No fine print, no phone tag.
Why TruePane Windows & Doors Is North Palm Beach’s Preferred Custom Windows & Doors Company
We’re known in North Palm Beach for one thing above all: we tell you the truth about scope before we quote a number. The local homes, especially the CBS ranch stock built from the 1950s through the 1970s, do not give you an easy retrofit. The original window bucks were sized for thin aluminum frames, not modern impact-rated insulated glass. A contractor who quotes a simple sash swap is quoting a job that will fail inspection or leak within a season. Dale Kessler founded TruePane on a straightforward rule: if the pane is not true, the job is not done. That means we measure twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before we leave.
North Palm Beach homeowners tend to have owned their houses for twenty years or more. They’ve already been burned once by a crew that disappeared when the fog showed up between the panes. Our technicians are background-checked and uniformed, working in your home the way they’d work in their own mother’s. We hire local and train apprentices into journeymen, and we answer the phone with a live person 24 hours a day, seven days a week. No voicemail tree, no regional call center.
Our work in North Palm Beach covers the original Country Club subdivisions, the canal-side streets east of US-1, and the older plats up toward the Northlake Boulevard corridor. We know which streets get the worst two-directional salt load and which openings were framed tight against the original CBS buck. That local knowledge is not something a franchise playbook provides. It’s how we keep a square deal on every quote.
Our Custom Windows & Doors Services in North Palm Beach
Every service below starts with a free estimate and a written line-item quote. We measure every opening twice, in person, before the truck is even loaded. Call (813) 320-9346 and you’ll speak to a person who knows North Palm Beach, not a dispatcher reading a script. For a full look at our Custom Windows & Doors capabilities, our service hub walks through the product lines and the process in detail.
Custom Shape Windows
North Palm Beach ranches occasionally feature eyebrow arches, half-rounds, or angled trapezoid openings from the original build, especially on the canal-side homes with front elevation detailing. Replacing those openings with impact-rated units means templating each rough opening by hand, because no two 1960s masonry openings are identical. We template in person, order the exact curvature from manufacturers including PGT and CGI, and set the unit with butyl flashing on every jamb. A custom shape window done right here requires marine-grade frame coatings. We won’t set an inland-spec frame in a salt-air zone, because the pitting starts within three years.

Commercial Storefront Glazing
Shops and offices along US-1 and the Northlake corridor in North Palm Beach face the same salt loading as the residential plats, plus a heavier wind exposure on the wider storefront glass elevations. We install and service aluminum storefront systems with thermally broken frames and marine-grade hardware. If you run a business in North Palm Beach and your front entrance is binding or your storefront glass has fogged between the panes, call (813) 320-9346. We’ll assess the opening, quote a coastal-spec replacement, and schedule the work so you’re not closed more than a day.

Curtain Wall Systems
For larger residential additions and commercial frontages, a curtain wall carries the entire wind load and the entire salt exposure. In North Palm Beach, that means structural silicone glazing, marine-grade aluminum extrusions, and anchored drip edges that shed salt-laden runoff. We’ve set curtain wall systems on canal-front properties where the previous contractor’s standard mullion drain design clogged with salt scale within two years. The fix is not a caulk gun. It’s a redesign of the drainage plane. We do that work in-house.

Architectural Grilles & SDLs
Many North Palm Beach homeowners want the look of divided lites without sacrificing impact rating or the thermal performance of a single insulated glass unit. Simulated divided lites, or SDLs, give you a true muntin profile applied internally and externally, with a spacer bar in between. We order SDLs in marine-grade finishes and we make sure the grille material matches the frame coating, because salt air will highlight any mismatch within a few years. The Country Club plats have enough authentic mid-century character that the wrong grille pattern looks cheap immediately. We’ll show you manufacturer samples side by side on paper before you commit.

Oversized Glass Panels
Canal-front living rooms in North Palm Beach often call for fixed picture windows in widths that exceed standard impact panel limits, and this is where having an authorized installer of PGT and CGI matters. Oversized panels require heavier mullions, laminated impact glass with a thicker interlayer, and a frame system rated for 140+ mph design wind speeds. We’ve installed fixed panels over ten feet wide in the Country Club plat and the eastern plats near the Intracoastal. The trick is not just the glass. It’s the load path from the mullion into the CBS structure. We verify that before we quote.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Palm Beach
TruePane is an authorized installer for PGT, CGI, Simonton, and Ply Gem, among more than a dozen manufacturer lines. That matters in North Palm Beach because the right product for a canal-side home is not the right product for a house off Prosperity Farms Road. PGT and CGI build their coastal impact lines for exactly this environment. Simonton and Ply Gem offer strong vinyl alternatives for the tighter budget, provided the frame coating and hardware are specified for salt loading. We stock local parts and order direct, so turnaround on a North Palm Beach job is measured in days, not weeks. We’ll put the quote side by side on paper so you can see exactly what you’re buying and what each warranty covers, in writing.
Common Custom Windows & Doors Problems We See in North Palm Beach Homes
- Salt-pitted aluminum frames. On canal-side streets and the eastern plats near the Intracoastal, standard aluminum extrusions pit within three to five years. The oxidation creeps into the jamb tracks, the sash binds, and eventually the lock hardware seizes. We replace those frames with marine-grade aluminum, fusion-welded vinyl, or fiberglass, and we coat every exposed fastener with stainless or hot-dip.
- Early seal failure and fogged glass. Salt-laden moisture attacks the edge seals of insulated glass units. In North Palm Beach, fog between panes appears years earlier than it does inland because the argon fill escapes through the failed seal and the U-factor dies with it. A fogged window is not an aesthetic problem. It’s a thermal failure, and it’s costing you on the electric bill every month.
- Corroded multi-point locking hardware. Casement and double-hung sashes on the water-adjacent plats get lock mechanisms that seize up or corrode shut. The result is a window that won’t lock securely, and in a 140+ mph wind zone, that’s a genuine safety issue, not a convenience. We replace locking hardware with marine-grade stainless as part of the install, not as an add-on.
- Non-impact jalousie and awning windows. The original Country Club plat homes were built with jalousie and single-pane aluminum, and those products cannot be made impact-compliant under any condition. A homeowner who asks for a “glass replacement” in a jalousie frame is really asking for a full opening demolition and re-buck. We have that conversation on the first visit, with the code requirements in hand.
If you want the full local picture on how we serve this area, read more about Custom Windows & Doors in North Palm Beach on our city hub page.
Pricing for Custom Windows & Doors in North Palm Beach, FL
You should know the numbers before you call, so here’s the honest range for this market. A standard impact-rated double-hung replacement in North Palm Beach runs $1,400 to $2,800 per opening, installed. A custom shape window starts around $2,200 and can run to $4,500 depending on the radius and the mullion detail. Architectural SDL grilles add $180 to $450 per sash. Oversized impact glass panels start at $3,000 per opening and go up with width and height. A full open-and-re-buck job with pressure-treated bucks and butyl flashing, which is what most canal-side jalousie retrofits require, typically adds $600 to $1,100 per opening. Coastal-spec frames and marine-grade hardware run 12 to 18 percent above an inland-spec quote. That gap is the price of not paying twice in ten years. Call (813) 320-9346 and we’ll put a written line-item quote in your hand. Estimates are free.
We Also Serve Cities Near North Palm Beach
Our crews work throughout the northern Palm Beaches, including Palm Beach Gardens, Palm Beach, West Palm Beach, and Jupiter. If you’re a short drive from North Palm Beach and need custom windows or doors, call (813) 320-9346. We schedule North Palm Beach and the surrounding plats together, so response times stay tight.
Serving North Palm Beach, FL - Our Local Coverage Area
We’re based in the North Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in North Palm Beach
You can’t, because jalousie frames are not rated for impact glazing and cannot be retrofitted to meet Palm Beach County’s post-2004 impact-resistance mandates. The frame itself fails, not just the glass. The correct scope is a full opening removal, re-buck with pressure-treated lumber, and installation of a new impact-rated unit. We’ve done this work on the canal-side streets of the Country Club plat, and we’ll walk you through the code requirements before any quote. Call (813) 320-9346 to have an opening measured.
Look for three things: marine-grade aluminum framing with a verified AAMA 2605 coating, stainless steel or hot-dip galvanized hardware on every hinge and lock point, and butyl flashing on every jamb rather than builder’s felt. Fusion-welded vinyl and fiberglass frames also hold up well in salt air, but the hardware and flashing details are non-negotiable. We specify those features by default on every North Palm Beach water-adjacent job, and we’ll show you the spec sheet before you sign.
Salt-laden moisture attacks the edge seals of insulated glass units, allowing the argon fill to escape. Once the argon is gone, the U-factor drops and the window no longer insulates. The fog between panes is the visible symptom; the higher electric bill is the invisible one. In North Palm Beach, this happens years earlier than it does inland, which is why we insist on marine-grade edge seal construction and register both warranty layers in writing before we leave the driveway.
Yes. Palm Beach County’s coastal design wind speeds in this zone run 140+ mph, and the impact-resistance mandate is based on wind zone, not water frontage. A home on Prosperity Farms Road faces the same code requirement as a canal-front home on Lighthouse Drive. Non-impact fenestration is a code violation and an insurance liability on the same transaction. We’ll pull the permit, and we’ll make sure the inspection passes.
A coastal-spec replacement in North Palm Beach uses marine-grade frame coatings, stainless hardware, butyl jamb flashing, and edge seals designed for salt contact. An inland-spec replacement uses standard finishes and hardware, and in this village it fails within three to five years. The coastal spec runs 12 to 18 percent more upfront, but the inland spec costs more within a decade because you’re replacing corroded frames and fogged glass. We quote both specs side by side, on paper, because you deserve to see the real difference. Call (813) 320-9346 for a written quote.
Get Your Free Custom Windows & Doors Estimate in North Palm Beach
If your windows are fogged, corroded, or simply original to a house built when jalousie was the standard, it’s time for a straight answer. Call (813) 320-9346 and a live person will answer. We’ll schedule a measurement, put a written line-item quote in your hand, and tell you exactly what your openings need, including the coastal spec that keeps you from paying twice. The estimate is free and the work comes with the 90-Day Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving North Palm Beach and the surrounding communities with a simple rule: if the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After