Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Plantation
Custom windows and doors in Plantation are rarely a cosmetic decision. This is Broward County’s High Velocity Hurricane Zone, and the homes here, mostly CBS ranch construction from the 1960s through the 1980s, carry original aluminum single-panes and jalousies that fail current code the moment any permit gets pulled. At TruePane Windows & Doors, our Custom Windows & Doors team scopes each Plantation job around the permit trigger, the septic and well setbacks on acreage lots, and the haul-access realities of older neighborhoods off Peters Road and Broward Boulevard. We quote it straight, register both warranty layers in writing before the truck leaves, and stand behind the work for 90 days with no paperwork fights. Call (813) 320-9346 for a free estimate on anything from a custom arch-top to a full jalousie-to-impact replacement.
Why TruePane Windows & Doors Is Plantation’s Preferred Custom Windows & Doors Company
We’ve spent years in this trade, and Plantation homes keep teaching the same lesson: the window is never just a window. A 1971 CBS ranch off NW 5th Street with original jalousies and a detached workshop sits on a lot where the septic tank and well line were laid decades ago. Any addition, any ADU, any bathroom remodel triggers a county inspection, and that inspection flags non-compliant openings. Our background-checked, uniformed technicians know this before they knock. They measure every opening twice, quote manufacturer lines side by side on paper, and explain exactly what the permit requires and what it doesn’t.
Dale Kessler founded this company in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. That means flashing tape at every jamb on a CBS wall. It means HVHZ-rated anchors spaced per manufacturer spec, not per habit. It means the 90-Day Done Right Promise and The Keystone Standard, both manufacturer warranty layers registered in writing, durations stated, before we pull away. Plantation homeowners who’ve been through one fogged-seal repair already know the difference.
Our Custom Windows & Doors Services in Plantation
Custom Shape Windows
Plantation’s ranch homes punctuate their stucco walls with the occasional eyebrow arch, octagon, or radius-top unit, usually over a fixed picture frame or a bath alcove. Custom shape windows in this city are ordered per opening, not pulled from a stock rack. We template each rough opening in person, account for the concrete-block jamb depth, and order the unit to match. An arched top on a 1970s CBS wall off University Drive takes longer than a rectangle, and quoting it correctly the first time saves a homeowner from a two-month surprise later.

Oversized Glass Panels
Oversized panels on a detached outbuilding or a rear elevation facing the pool deck need heavy glass, HVHZ framing, and a real conversation about structural load. On Plantation acreage lots, we also check the well and septic setbacks before specifying the panel size, because the county will reject a permit if the opening footprint conflicts with a drain field easement. We’d rather catch that in the walkthrough than watch a homeowner pay for a redesign.

Architectural Grilles & SDLs
Simulated divided lites, or SDLs, give a Plantation ranch the look of true muntins without sacrificing impact ratings. We install them as applied bars on the interior and exterior faces of the insulating glass unit, matched to the frame finish. On an HVHZ-rated casement serving a CBS home near Plantation Acres, the grilles are a visual nicety that carries no code concession. We quote them as a line item, not a surprise.

Commercial Storefront Glazing & Curtain Wall Systems
Plantation’s commercial corridors along University Drive and State Road 7 include low-rise storefronts that still carry original single-pane aluminum glazing. TruePane handles storefront glazing and curtain wall replacements for local owner-operators who need a storefront that holds a seal through hurricane season and keeps the utility bill sane. Curtain wall work on Plantation commercial buildings involves anchoring to concrete block or steel, and we stage the crane or lift access so the tenant can stay open.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation
We’re an authorized installer for more than a dozen manufacturer lines, and for Plantation homeowners that usually means Andersen, and Pella make the shortlist. Each line carries different HVHZ product approvals, different lead times, and different glass packages. We quote them side by side on paper so you see the gap between a mid-tier impact casement and a premium argon-filled unit with simulated divided lites. Local parts availability for these brands keeps turnaround tight when a single replacement sash is all that’s needed on a Plantation ranch.
Common Custom Windows & Doors Problems We See in Plantation Homes
- The permit-trigger jalousie problem: A homeowner pulls a permit for a detached ADU off Peters Road, and the county flags every original jalousie window on the main house as non-compliant. Suddenly a $20,000 ADU carries a mandatory $8,000-to-$14,000 window replacement line item. We walk customers through this before the quote, not after the inspector arrives.
- Pocket inserts on a full-frame reality: Technicians who don’t know Plantation quote a pocket insert into original jalousie frames. The county won’t sign off on a pocket insert where the jalousie frame remains. Full-frame removal becomes the only code-compliant path, and the price doubles from $600 to $1,200 per opening. We quote full-frame when full-frame is what code demands.
- Flashing skipped on CBS walls: Impact-rated units installed without flashing tape at the jamb let wind-driven rain wick behind the frame within two seasons. Interior sill rot in a Plantation ranch starts as a small dark stain. We flash every jamb as a matter of course on block construction, and the 90-Day Done Right Promise covers it if anything is ever not right.
- Oversized shop panels scoped without setback review: A detached shop on an acreage lot gets a big glass wall specified, and then the county rejects the permit because the opening lands inside the septic setback. We check the survey and the well line before we quote the panel, which spares the homeowner a redesign fee.
Pricing for Custom Windows & Doors in Plantation, FL
Custom shape windows in Plantation typically run $900 to $2,600 per unit, depending on the radius geometry and the glass package. Oversized impact-rated panels for a wall or outbuilding start around $3,000 and climb with size, lowering mechanism, and structural reinforcement. Architectural grilles and SDLs add roughly $80 to $160 per window as an applied bar package, more for interior and exterior placement. A full jalousie-to-HVHZ-impact replacement on a 1970s ranch generally runs $900 to $1,500 per opening, including full-frame removal, flashing, and new trim. The exact number depends on the survey, the setback lines, and what your permit requires. Call (813) 320-9346 for a line-item quote on your specific openings. Estimates are free, and the quote will not change once work starts.
We Also Serve Cities Near Plantation
Beyond Plantation, our crews handle custom window and door work in Fort Lauderdale, Margate, Coconut Creek, and Pompano Beach. Each holds its own HVHZ quirks, and the same Plantation standard applies: measure twice, quote straight, and register both warranty layers before the truck leaves.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Plantation
Because Broward County enforces the High Velocity Hurricane Zone code, and that code prohibits jalousie windows on any permitted scope of work. The moment a Planation homeowner pulls a permit for a bathroom addition, an ADU, or a kitchen reno, the inspector will flag every original jalousie on the house as non-compliant. Those louvered glass panels have no structural mullion strength and will not hold a wind-borne debris impact. We quote the replacement line as part of the larger project scope so you never absorb it as a surprise change order after the framing is up. Call (813) 320-9346 if you need a breakdown before you file for the permit.
On a Plantation acreage parcel, the drain field and well line have setback easements that the county enforces, and any new opening on a wall that projects into that easement zone can kill the permit. For oversized glass panels on a detached outbuilding or an addition, we pull the survey, locate the septic tank and well head, and check the proposed opening against the setback lines before we quote. Sometimes the panel shifts two feet; sometimes the project needs a different elevation. We do that scoping work before you pay anything, because a redrawn quote after a county rejection is worse for everyone. Call (813) 320-9346 and we’ll review your survey with you.
Yes. Simulated divided lites apply to the interior and exterior surfaces of the impact-rated insulating glass unit and do not compromise the HVHZ product approval. We match the grille profile and color to the frame finish so a Plantation CBS ranch keeps its 1970s character without giving up the wind-borne debris rating. The grilles add a line item to the quote, and we show it on paper before you commit. Call (813) 320-9346 for a per-opening price.
Plantation sits in the Atlantic-corridor exposure zone, where salt-laden humidity rides inland year-round and combines with intense UV. That double assault pits bare aluminum frames, rots weatherstripping, and destroys thermal breaks faster than in Orlando or Lakeland. A 1980s aluminum single-pane that would still be functional inland is often chalky and bowed here, which is why Plantation replacement cycles run shorter and why full-frame swaps outnumber pocket inserts. We see it every week on homes near Broward Mall and Plantation Central Park.
Yes. Any habitable or conditioned outbuilding on a Plantation property falls under the same Broward County HVHZ code as the main dwelling, which means impact-rated glazing, heavy-duty frames, and approved anchoring. A detached workshop, studio, or ADU is not exempt. We quote the panel with the same Miami-Dade NOA or Florida Product Approval requirement that applies to the house, and we verify the well and septic setbacks before ordering. Call (813) 320-9346 to schedule a free walkthrough of your outbuilding.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation and South Florida. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After