Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Window Installation in Tampa: What to Know First
TruePane Windows & Doors provides independent CGI window installation across Tampa, including casement, awning, fixed, single-hung, double-hung, sliding, and bay/bow configurations. Most CGI replacements and new-construction installs take one to two days once the units are in hand, and we quote fixed pricing before the job starts so the number on the bill matches the number on the proposal. If you own CGI windows that need setting, or you are buying CGI units and want them installed properly the first time, call us at (813) 320-9346.
This page is written for homeowners in Tampa who already have or are choosing CGI windows. It covers how these products fail, what a proper installation looks like, honest cost ranges, and the warranty details that matter before any glass leaves the truck.
How CGI Products Fail - and How We Fix Them
- Fogging between panes on CGI Estate and Tapestry series. Tampa humidity exposes seal failure early. A broken insulated glass unit is not uncommon after a decade in direct sun, and the tell is moisture you cannot wipe off the inside. The real cause is often a failed desiccant in the spacer bar, not the frame. We replace the IGU with an OEM unit when warranty covers it, or a certified equivalent when the warranty has expired, and we register the replacement in writing.
- Casement crank wear on CGI Estate casements. The folding handle and worm gear mechanism on these units is under constant load in the sea air, and the hardware corrodes faster a few blocks off Bayshore than it does inland. The symptom is a handle that turns without moving the sash. We replace the operator arm and gear assembly rather than forcing the sash, because forcing it strips the spline and turns a one-part job into a full sash rebuild.
- Frame leak at the sill on CGI Tapestry and Sentinel sliding windows. In Tampa, heavy afternoon storms will find a weep system that was never cleaned or was sealed over by an earlier installer. Water pools in the track and then finds its way into the wall. The fix is not more caulk on the interior; it is restoring the weep path and re-leveling the sill. If the flashing underneath was never set right, that gets corrected before the unit goes back in.
- Binding sashes on CGI fixed and single-hung units in older Tampa block homes. Homes built slab-on-grade in the 1960s and 1970s settle, and window openings drift. A sash that binds in August is usually an opening that is no longer square. We measure the opening twice, shim at the load points, and set the unit so it operates without fighting the frame.
- Aftermarket glass with the wrong tint or thickness. We have seen CGI units reglazed with standard annealed glass instead of the original laminated or tempered lite. It looks the same from a distance and fails under the first storm season. When we replace glass in any CGI window, we match the original lite specification to the manufacturer documentation, not the cheapest sheet that fits the opening.
Our CGI Window Installation Process
- 1
Call and schedule. A live person answers at (813) 320-9346. We set a time, and a background-checked, uniformed technician shows up when we said he would.
- 2
Measure and diagnose. Every opening gets measured twice. We check square, plumb, and the existing flashing before any parts are ordered.
- 3
Parts decision. We present OEM versus quality aftermarket parts on paper, side by side, with prices. You see exactly what you are buying and what each option means for the warranty.
- 4
Install and seal. The unit is set, shimmed at load points, flashed correctly, and sealed with backer rod and sealant, not just a bead of caulk over the old line. We install the way we would in our own mother’s house.
- 5
Test and document. Every sash is operated, every weep is flushed, and both manufacturer warranty layers are registered in writing before the truck leaves the driveway. If the pane is not true, the job is not done.
- 6
Cleanup and walkthrough. The work area is left clean, the old glass is hauled off, and you get a written record of what was done and what is covered.
What CGI Window Installation Costs in Tampa
| Job | Typical Tampa Range |
|---|---|
| Single CGI casement or fixed window, full frame replacement | $950 - $1,800 per opening |
| CGI sliding window, full frame replacement | $1,200 - $2,400 per opening |
| CGI bay or bow window installation | $4,500 - $8,500 for the unit and install |
| IGU replacement on a CGI Estate or Tapestry window | $350 - $750 per lite |
| Casement operator and hardware replacement | $180 - $400 per window |
What moves the price: the size of the opening, whether it is a full frame replacement or an insert, access (second story, tight clearance), and whether the existing flashing is salvageable. We offer a senior and veteran discount of 5% on every job, and we will put the proposal in writing so there are no surprises. Call (813) 320-9346 for a free estimate on your specific CGI installation.
Why Tampa Homeowners Call TruePane Windows & Doors for CGI Work
We are an independent CGI service provider, which means we answer to you first and to nobody’s corporate sales quota. We have been serving communities in the Tampa Bay area since 2008 through a heritage that started with Dale Kessler’s father running a small building-maintenance outfit for thirty years. Dale grew up in Seminole Heights and still lives about six blocks from where he learned to ride a bike. The company he founded in 2008 is built on a simple rule: if the pane is not true, the job is not done.
Every CGI job is covered by the 90-Day Done Right Promise and The Keystone Standard. Both manufacturer warranty layers are registered in writing, durations stated, before the truck leaves your driveway. If something is not right, we make it right, no paperwork fights and no arguing. We also install Andersen, Pella, PGT, so if a CGI replacement is not the right answer for your opening, we will show you the alternatives on paper and let you decide.
FAQs
No, not when the installation is done to manufacturer specifications. What voids a CGI warranty is improper installation, missing flashing, or using unapproved parts. We install per CGI’s published requirements and register both warranty layers in writing before the job is complete. That written registration is the Keystone Standard on every TruePane job. Call (813) 320-9346 if you want us to check a previous installation before you file a claim.
We can match existing CGI units in most cases, including the frame color, grid pattern, and glass tint. CGI has made changes to some product lines over the years, so if an exact cosmetic match is not available, we will tell you that before you spend a dollar, and we will show you the closest option in writing. We have replaced CGI Tapestry units in South Tampa, Carrollwood, and Westchase, and the matched installs are the ones homeowners write us about.
Most single-window CGI installations are done in one day. A full opening replacement with new flashing usually runs four to six hours, including cleanup. Multi-window jobs, bays and bows, or installs that reveal rotted framing can take longer, and we will tell you the timeline in the estimate. We never leave a second appointment hanging, and we do not stretch a job to bill more hours.
We use OEM CGI parts when they are available and when the warranty still covers them. When a product is out of warranty, we present OEM and quality aftermarket options side by side on paper with prices, and you choose. We will never install an aftermarket part that changes the window’s performance or storm rating without telling you in writing first. If it needs to be in writing to be true, we will put it in writing.
It depends on the leak. Many CGI window leaks in Tampa are sill and weep-system failures that can be repaired without replacing the unit. If the frame itself is compromised or the flashing under the window was never set correctly, replacement is the honest answer. Our technician will diagnose the cause of the leak, show you what he found, and give you a fixed price for the correct fix. Call (813) 320-9346 to schedule a look.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.