CGI Windows & Doors in Dunedin, FL

CGI Windows & Doors in Dunedin, FL | TruePane Windows & Doors

We provide independent CGI windows & doors service across Dunedin, from the marina blocks off Edgewater Drive to the bungalow streets flanking the Pinellas Trail, and we also handle CGI repair in Clearwater. The thing that makes our CGI work different here is simple: we understand that nearly every older Dunedin home sits inside Florida’s Wind-Borne Debris Region, which means a window replacement is rarely just a window replacement. It’s a code-compliance project, an insurance-mitigation project, and a corrosion-repair project rolled into one. Call (813) 320-9346 for a free estimate on any CGI window or door in Dunedin.

Call (813) 320-9346

Why Dunedin Residents Choose Us for CGI Service

Our crew has spent years inside Dunedin’s 1940s-1960s CBS homes, replacing original jalousie and salt-corroded aluminum with CGI’s full Miami-Dade and Florida Product Approved line. That’s not something you pick up from a manufacturer’s spec sheet. It comes from pulling apart enough failed frames on enough real Dunedin houses to know what holds up and what doesn’t. Dale Kessler, our owner, grew up in Seminole Heights and learned the glazing trade through Hillsborough Community College’s construction technology program, spending more time on the shop floor than in a classroom. For the better part of two decades he has been measuring, setting, and sealing windows and doors across the Tampa Bay area, and the work he’s known for is storm-rated installation done tight enough that a follow-up inspection is never a surprise. We’re independent and factory-trained by our own field experience with CGI’s pressure-rated glazing systems. That’s also our full service area for CGI sales & service, and Dunedin is one of the cities where we see the most repeat CGI work.

Common CGI Windows & Doors Problems We Solve in Dunedin

Dunedin’s salt air, compact lots, and block-wall construction create a specific set of failure patterns we see again and again on CGI equipment. These are the five we fix most often:

• Salt-spray pitting and white aluminum oxide bloom on west- and northwest-facing bottom rails. Frames facing St. Joseph Sound catch the prevailing breeze, and the salt in that air chews through aluminum faster than most homeowners expect. We see it concentrated along Edgewater Drive and the marina blocks. The fix usually involves bottom-rail repairs with corrosion-resistant materials and resealing the threshold pan.
• Original jalousie louver channels silicones-caulked shut for decades. This is the classic Dunedin old-home problem. Homeowners patched leaky jalousies with silicone caulk for years instead of replacing them. Those assemblies fail wind-mitigation inspections, and the glass breaks in every named storm that passes through the Gulf. We replace them with CGI impact units and photograph the new Miami-Dade NOA label for the insurance file.
• Stress cracks in interior plaster returns around impact casements on 1960s concrete block openings. When CGI impact casements get set into block openings with loose brick ties and no shims, the panel shifts under load and the plaster return cracks. On older Dunedin CBS construction this shows up within a year or two of an improper install.
• Roller assemblies on CGI 950 Sliding Glass Doors binding and corroding. Sand and salt grit embed in the track, especially on ground-floor lanai doors facing the Gulf breeze. Rollers seize, the door drags, and homeowners force it until the handle or lock core gives out. We stock CGI-compatible rollers locally for faster Dunedin turnaround.
• Fogged or seal-failed impact glass on west-facing elevations. Direct afternoon sun plus constant salt exposure shortens seal life on CGI units as they age. When the glass still carries a valid NOA and the frame is structurally sound, we can often reseal or replace the insulated unit. When it doesn’t, we replace the whole opening to keep the home eligible for wind-mitigation credits.

CGI Service in Dunedin: What Local Conditions Mean for Your Equipment

Here’s something that’s true in Dunedin and nowhere else in Pinellas Park CGI service areas: the city sits entirely inside Florida’s Wind-Borne Debris Region, with St. Joseph Sound on the west and the Gulf of Mexico one barrier island away. That’s a code trigger inland cities like Safety Harbor don’t share. Any replacement jalousie or single-pane aluminum opening in Dunedin must be upgraded to impact-rated CGI under the Florida Building Code. There’s no grandfathering when the opening is being replaced. The same trigger makes Citizens Property Insurance wind-mitigation credits almost automatic once the job is done and documented. It also reinforces why we don’t patch old equipment past its useful life. A jalousie louver channel with three decades of silicone caulk in it isn’t a window anymore. It’s a liability that’ll show up in an insurance inspection and cost more than the replacement would have.

Contractors working the blocks near Edgewater Drive and the marina regularly find original jalousie windows whose louvered glass panels have been repaired with silicone caulk for decades. That’s not a minor cosmetic thing. Citizens inspectors flag it. Once it’s flagged, the homeowner has a coverage condition to resolve. We fix it properly, with CGI impact glazing, squared block openings, and the Miami-Dade NOA label photographed on the front of the frame for the wind-mitigation inspection. This is the full Dunedin service area we cover, and we handle dozens of these cases every year.

Our tech pulled the original three-panel jalousie assembly on a 1954 CBS bungalow off Edgewater Drive, found every louver channel silicone-caulked shut and the aluminum frame pitted through at the bottom rail. We cut the welded straps, squared the block opening, and set a two-panel CGI Sentinel impact fixed lite with a single awning vent, then photographed the new Miami-Dade NOA label on the front of the frame for the homeowner’s wind-mitigation inspection and insurance discount.

CGI Models & Products We Service in Dunedin

We service the full CGI line in Dunedin, including the Sentinel Series (awning, casement, and picture windows built for block-wall openings), the Estate Series (single and double hung for ranch and bungalow elevations), the 950 Series (impact sliding glass doors and mulled fixed lites), and the Custom Architectural Series (arc and radius units for Dunedin’s older historic bungalows). For parts, we use CGI factory hardware and lock cores when available. For older impact panels out of production, we source marine-grade 316 stainless hinges and rollers that match the original CGI finish. We never put big-box generic hardware in a CGI frame. If the frame is structurally sound and the glass carries a valid NOA, we’ll repair it. If it doesn’t, we replace the entire unit. If it needs to be in writing to be true, we will put it in writing.

CGI Service Pricing in Dunedin

FAQs - CGI Windows & Doors in Dunedin

Service Areas Near Dunedin

We handle CGI service throughout north Pinellas and beyond. In addition to our Dunedin work, we cover Anna Maria, Apollo Beach, and the surrounding communities along the Pinellas and Manatee coastlines. That includes CGI service in Eatonville and CGI service in Edgewood when the job takes us inland.

Book Your CGI Service in Dunedin Today

Call (813) 320-9346 to schedule your free estimate. We’ll measure every opening twice, quote your CGI options side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. If the pane is not true, the job is not done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Dunedin since 2008.