Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Lake Clarke Shores, FL | TruePane Windows & Doors
We provide independent CGI windows and doors service across Lake Clarke Shores, from diagnosis and repair to our Window Installation in Lake Clarke Shores for full-frame impact replacement. The thing that separates our CGI work here is the town’s stamped wind-load requirement: because nearly every lot touches Lake Clarke or Lake Osborne, the building department checks every opening against the lakefront exposure, not the county’s default inland wind zone. That means a CGI install in Lake Clarke Shores is an engineered job from the start, not a swap-out. Call (813) 320-9346 for a free estimate on any CGI window or door.
Why Lake Clarke Shores Residents Choose Us for CGI Service
We’ve pulled permits and installed CGI impact windows and doors on dozens of Lake Clarke Shores mid-century concrete-block ranch homes. That work has given us a working knowledge of how CGI’s premium aluminum lines behave on the lake’s particular exposure, without us ever being a factory-authorized dealer. Dale Kessler spent the better part of two decades measuring, setting, and sealing windows and doors across the Tampa Bay area and now brings that same storm-rated discipline to every CGI job here. Background-checked, uniformed technicians measure every opening twice and register both manufacturer warranty layers in writing before the truck leaves your driveway. If it needs to be in writing to be true, we will put it in writing.
Common CGI Windows & Doors Problems We Solve in Lake Clarke Shores
- White, powdery oxidation on lower frame rails. On lakeside elevations, persistent airborne lake moisture and splashback accelerate aluminum oxidation on CGI casements, often showing up within 10 to 14 years. We clean, treat, and reseal where the frame is sound, and tell you straight when it is not.
- Targa slider interlock binding. Fine lake grit and organic debris work into the bottom track of CGI Targa Series sliding glass doors, making the interlocking sashes rough to operate. We pull the panels, clean the track channel, and replace worn rollers with dimensionally matched hardware that holds up to the moisture.
- Weep-hole gasket degradation. Lakefront CGI frames lose gaskets faster than identical units a few miles inland. When those fail, water pools inside the frame after a heavy Palm Beach County downpour. Replacing them before the water gets behind the stucco is a small job that prevents a big one.
- Corner seal failure on 1970s-80s single-pane CGI frames. Old caulk hardens and separates from the concrete-block rough opening, allowing pitting and seal failure at the frame corners. On houses built in the 1950s through the 1970s, this is one of the most common calls we run in Lake Clarke Shores.
- Jalousie-to-impact conversion. Original louvered jalousie windows cannot be brought into hurricane-code compliance through any repair or shutter combination. Once you pull a permit in Lake Clarke Shores, the county requires full replacement with impact-rated units. We handle that conversion start to finish.
CGI Service in Lake Clarke Shores: What Local Conditions Mean for Your Equipment
Lake Clarke Shores is one of the few Palm Beach County municipalities where the town’s own building department requires a stamped wind-load calculation on every single permitted window or door replacement, because nearly all lots touch Lake Clarke or Lake Osborne. What that means for a CGI owner is practical: the Florida Product Approvals on your windows are checked opening-by-opening against the actual lakefront exposure, not just the county’s default inland wind zone. A house on Waterside Drive faces different wind pressures than one three streets inland, and the town knows it. Oversized openings along the lake-facing wall often need custom-ordered CGI Estate casements or Targa sliders engineered to that computed load, which is why generic “impact window” quotes from out-of-town contractors fall apart at permit review. We work from the stamped calcs, so the unit that arrives is the unit that passes.
CGI Models & Products We Service in Lake Clarke Shores
We service the full active CGI lineup: Estate Collection casement and awning windows, Targa Series impact sliding glass doors, Sovereign Series single-hung and fixed picture windows, and Classic Series impact French doors. For active product lines we source genuine CGI replacement parts (rollers, keepers, weatherstripping, balance systems) through our supply chain. When a component is discontinued or backordered, we use marine-grade, dimensionally matched aftermarket hardware that holds up to Lake Clarke’s corrosive moisture. Our crews keep common CGI hardware stocked for faster turnaround on Lake Clarke Shores calls, and we repair frames, hardware, and glass seals when the integrity is sound. If a unit cannot meet current impact standards, we recommend full replacement rather than patching a non-compliant assembly. For homeowners researching their options, our CGI sales & service page covers the full scope of what we do with the brand.
CGI Service Pricing in Lake Clarke Shores
CGI window service in Lake Clarke Shores typically runs $145 to $385 for hardware repair or weatherstripping replacement, while full-frame impact window replacement falls between $1,800 and $4,200 per window depending on size, wind-load requirements, and whether we are converting from jalousies or original aluminum. Impact sliding glass door service ranges from $285 to $950, with full Targa Series replacement between $5,500 and $12,000 once you factor in the lakefront wind calculations. These are the variables: whether the opening needs a custom-order unit, the condition of the rough opening framing, and whether the job is a like-for-like swap or a conversion. A free estimate from us means a written line-item quote with both warranty layers spelled out. Call (813) 320-9346 for an exact number on your home; there is no charge for the estimate.
Serving Lake Clarke Shores, FL - Our Local Coverage Area
We’re based in the Lake Clarke Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Lake Clarke Shores
The town requires a stamped wind-load calculation on every permitted window or door replacement because nearly all lots touch Lake Clarke or Lake Osborne. Unincorporated areas apply the county’s default inland wind zone, but Lake Clarke Shores checks each opening against the actual lakefront exposure. That means your jalousie-to-CGI conversion needs to clear an engineered hurdle before the glass is even ordered. Call (813) 320-9346 and we will walk you through what the permit package requires.
Sustained lake-driven wind carries airborne moisture that accelerates aluminum-frame oxidation and seal degradation. Homes sitting directly on Lake Clarke or Lake Osborne get constant moisture exposure that inland Palm Beach County neighborhoods never see. The lower frame rails on lakeside elevations take the worst of it, which is why we pay special attention to weep holes and corner seals on every CGI frame we touch here.
In most cases we can repair it. Fine lake grit and debris accumulate in the bottom track and the rollers wear out. We clean the track channel, replace the rollers with marine-grade hardware, and realign the interlocking sashes. If the frame itself is pitted or the glass seal has failed, replacement may be the better call, and we will show you both options on paper before you spend a dollar.
No. Original single-pane CGI aluminum frames from the 1970s and 1980s predate modern impact standards and cannot be brought into compliance through repair, caulking, or shutter retrofits. If the frame is sound we can service the hardware, but once you pull a permit for anything on that opening, the town requires a compliant impact-rated unit. Call (813) 320-9346 and we will measure and give you a straight answer on what code requires.
CGI Estate Collection casement windows are the most common choice we install when converting from original jalousies. The casement geometry works well in the narrow openings common on 1950s and 1960s ranch homes, and the impact glazing meets the lakefront wind-load calculations the town requires. On Waterside Drive, a 1963 ranch still had original jalousies along the whole lake-facing wall, and the aluminum frames were so corroded at the sills that the glass louvers would not fully close. We pulled the permit, removed the rotted rough opening trim, and installed six custom-ordered CGI Estate casements with impact glazing and stainless hardware, then finished the full-frame replacement with new flashing and stucco returns that matched the house’s 60-year-old texture.
Service Areas Near Lake Clarke Shores
We run CGI service calls throughout the Lake Clarke Shores area and into the surrounding communities, including Apollo Beach, Anna Maria, Altamonte Springs, and Acacia Villas. If you are on the water or just a few streets back, we will come out, take the measurements, and put the numbers in writing. For our full coverage map, see our Lake Clarke Shores service area page. Customers a bit farther out can also find us through CGI service in Lake Helen and CGI service in Lake Mary.
Book Your CGI Service in Lake Clarke Shores Today
Whether it is a sticking Targa slider on the lake side of the house or our Door Installation in Lake Clarke Shores for a full jalousie-to-impact conversion, our crews know what Lake Clarke Shores code requires and how to keep a CGI unit tight in this climate. Call (813) 320-9346 for a free estimate; a live person answers every call, and we will schedule a time that works for you.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Clarke Shores and the surrounding communities since 2008 through a heritage of craft and community commitment.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.