Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Lake Park, FL | TruePane Windows & Doors
We provide independent CGI windows and Lake Park Door Installation service across Lake Park, from Estate Series casements to Targa impact sliders. The one thing that makes our CGI work here different: we understand that nearly every window or door opening in this town sits inside Palm Beach County’s wind-borne debris region, so a simple replacement is rarely simple. If you need straight answers about your CGI windows and a crew that knows Lake Park’s salt-air conditions, call (813) 320-9346.
Why Lake Park Residents Choose Us for CGI Service
Dale Kessler grew up in Seminole Heights and has spent the better part of two decades measuring, setting, and sealing windows and doors across South Florida. He runs TruePane the way his father ran a building-maintenance outfit for thirty years: a callback is a character flaw, not just an inconvenience. Our crew sees more CGI windows and doors in Lake Park’s salt-heavy coastal zone than any independent shop in north Palm Beach County, and we apply that field knowledge to every model, from mid-century installs through current hurricane-impact lines, without pretending to be a factory-authorized dealer. We are an independent CGI service provider, which means we answer to you, not to a manufacturer’s sales quota. We install genuine CGI parts when panel integrity is intact, and we tell you plainly when it is time to replace instead of patch.
Common CGI Windows & Doors Problems We Solve in Lake Park
- White, powdery oxidation on aluminum bottom rails and corner gaskets. Direct salt spray off the Lake Worth Lagoon settles on frames and eats at the mill finish. We see this constantly on original 1990s and early 2000s builder-grade aluminum frames in Lake Park. Left alone, the pitting deepens until the corner gasket can no longer seal, and then water gets behind the frame.
- Failed insulating glass seals causing cloudy, hazy lites. On East- and Southeast-facing openings, driven salt moisture sits against the glazing channel and works into the seal over time. CGI units that should last decades can fog within 8 to 12 years here. We quote full sash or panel replacement when the seal has failed on a primary impact opening.
- Hardened, cracked, or shrunken vulcanized weatherstripping on sliding door tracks. Summer squalls push wind-driven rain under thresholds when the weatherstripping lets go. This is a common call in Lake Park, especially on homes within a few blocks of the Intracoastal. We replace with genuine CGI weatherstripping so the track seats like the original.
- Roller assemblies seizing on heavy impact sliding glass doors. Sand and salt grit compact in the track, and before long the door drags or binds. It is most common on doors within two blocks of the Intracoastal. We clean the track, replace rollers with genuine CGI hardware, and adjust the panel so it glides without fighting you.
- Jalousie windows still in place from the 1950s and 1960s. These louvered glass-slat panels provide virtually zero hurricane resistance. The moment a homeowner pulls a permit for any window work in Lake Park, the inspector requires those openings to come fully up to current wind code. We remove jalousies and install code-compliant impact units sized to the original opening.
CGI Service in Lake Park: What Local Conditions Mean for Your Equipment
Lake Park’s entire residential core east of Dixie Highway sits inside Palm Beach County’s wind-borne debris region. That means even a single original jalousie or single-pane aluminum window cannot be replaced like-for-like under a permit without triggering a code-compliant impact-rated upgrade. This compliance burden does not apply to neighboring unincorporated areas or towns a few miles west like Mangonia Park or West Palm Beach, where older openings can sometimes be swapped as non-impact if no structural change is made. For CGI owners in Lake Park, this changes the math on every job. A homeowner who wants to fix one fogged lite on a lagoon-facing wall may be required by the county to bring that entire opening up to impact standards. We walk you through exactly what the permit requires before we quote the work, so there are no surprises when the inspector arrives. If it needs to be in writing to be true, we will put it in writing.
CGI Models & Products We Service in Lake Park
We service the Estate Collection casement and fixed windows, S-Series impact-rated single hung and picture windows, Targa Series impact sliding glass doors, and Sentinel Series impact casement and awning windows. Our approach on every job is the same: we install genuine CGI replacement parts, including sash locks, keepers, balances, rollers, and weatherstripping, when the panel itself is sound. Aftermarket hardware rarely matches the original mill finish or marine-grade tolerance CGI uses, and a mismatched lock or keeper on an impact window is a compromise we will not make. For Lake Park turnaround, we keep common CGI hardware on the truck and can order full sash replacements directly through our supplier network. CGI sales & service is a core part of what our crew handles across Palm Beach County.
CGI Service Pricing in Lake Park
CGI service pricing in Lake Park depends on what the unit needs. A weatherstripping replacement or roller swap on a Targa slider typically lands in the $180 to $340 range. A failed insulating glass seal on an S-Series single hung runs higher, usually $400 to $900 per sash depending on size and glass package. If the frame shows deep pitting or the glazing has failed on a primary impact opening, we honestly quote the full sash or panel replacement rather than patching a unit that cannot meet current Palm Beach County wind code. Every estimate is free, line-itemed, and includes the labor, parts, and permit scope in writing. Call (813) 320-9346 to schedule yours. We will not put a number on the phone we cannot stand behind in person.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Lake Park
Because Lake Park sits inside Palm Beach County’s wind-borne debris region, so any permitted window replacement triggers a requirement that the opening meet current impact standards. A jalousie cannot be swapped for another jalousie under a permit. The work has to bring that opening to code, which usually means an impact-rated CGI unit sized to the existing rough opening. Call (813) 320-9346 and we will tell you exactly what the county will require before we quote anything.
Yes, and the difference comes down to the mill finish and hardware tolerance. CGI uses marine-grade aluminum finishes and stainless hardware that hold up under direct salt spray far longer than builder-grade aluminum. That said, no window is immune to Lake Park’s salt air. Regular cleaning of frames and tracks, especially on lagoon-facing walls, extends the life of any unit. We can show you which parts to clean and which to leave alone during a service visit.
If the frame is intact and the glass is clear, we can repair hardware, replace weatherstripping, and restore operation. But if the frame shows deep pitting or the seal has failed on a primary impact opening, replacement is usually the honest answer. Patching a unit that cannot meet current wind code puts you back in the same spot next storm season. Call (813) 320-9346 for a free assessment and an estimate that spells out repair versus replace in plain terms.
Salt and sand. Lake Park sits directly on the western shore of the Lake Worth Lagoon, and the grit that blows off the water and the beach compacts in door tracks. West Palm Beach is far enough inland that the same rollers last years longer. On heavy CGI Targa impact sliders, we clean the track fully, replace rollers with genuine CGI hardware, and adjust the panel so the load distributes evenly across all four rollers. Call (813) 320-9346 and we will get your door sliding smooth again.
Yes. Any window replacement in Lake Park requires a permit, and because the property is inside the wind-borne debris region, that replacement must meet current impact-rated code. There is no workaround for a lagoon-facing opening. We pull the permit, schedule the inspection, and make sure the Lake Park Window Installation passes the first time. Estimates are free. Call (813) 320-9346.
Service Areas Near Lake Park
Our crew covers Lake Park and the surrounding communities along the I-95 corridor and the Intracoastal. We regularly work in Lake Park service area homes as well as neighboring CGI service in Lake Worth Beach and CGI service in Lantana. If you are just north or south of Lake Park, call and we will schedule the same crew you would get if you lived off Park Avenue.
Book Your CGI Service in Lake Park Today
If your CGI windows or doors are showing salt damage, fogged glass, or hardware that fights you, call (813) 320-9346. We answer the phone with a live person, we show up when we say, and we put everything in writing. Free estimate, no pressure, just straight answers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.