Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in New Port Richey, FL | TruePane Windows & Doors
We provide independent CGI window and door service throughout New Port Richey, from the downtown river corridor to the western neighborhoods near the Gulf, and we also offer CGI service in Port Richey for nearby homeowners. The thing that makes our CGI work different here is simple: we know the jalousie conversion problem better than any manufacturer rep, because we’ve pulled hundreds of corroded original frames out of 1950s and 1960s concrete-block homes between Grand Boulevard and the Cotee River. Call (813) 320-9346 for a free estimate on any CGI repair, service call, or full replacement.
Why New Port Richey Residents Choose Us for CGI Service
Our crews have been working on CGI frames across Florida’s Gulf coast for years, and the salt-air behavior of CGI’s aluminum impact frames and hardware is something we understand at a level you only get from pulling failed units out of homes built when Eisenhower was president. We’re an independent service provider, which means we don’t answer to CGI’s warranty department and we won’t steer you toward a replacement when a repair is the honest call. Dale Kessler founded TruePane Windows & Doors in 2008 after spending two decades measuring, setting, and sealing windows across the Tampa Bay area, and his rule has never changed: if the pane is not true, the job is not done. We stock genuine OEM-compatible rollers, locks, and weatherstripping for common CGI lines, and when we need a part we don’t have, we order it the same day rather than asking you to wait two weeks. Our CGI sales & service work covers everything from a single fogged casement to a full house of impact-rated replacements, and every job carries our 90-Day Done Right Promise. We’re not the cheapest bid in New Port Richey. We’re the call homeowners make when they’re done with cheap bids.
Common CGI Windows & Doors Problems We Solve in New Port Richey
Here’s what we see most often on CGI units in New Port Richey:
- White powdery corrosion on bottom rails and sill tracks. On homes within a few miles of the open Gulf, CGI aluminum frame exteriors start showing oxidation and pitting along the bottom rails within 8 to 10 years. The salt-laden air gets under factory finishes faster than inland Pasco and the failure shows up as a chalky white bloom that eventually eats into the metal itself.
- Cloudy glass on older single-pane casements. Original non-impact CGI casements installed in the 1970s and 1980s are failing in New Port Richey. The marine air works through aging gaskets, the seal lets go, and the pane turns milky. It’s cosmetic at first, but the window has lost its insulating value and it won’t come back.
- Dragging or binding sliding door hardware. CGI sliding door rollers and lock hardware corrode in the humidity we get here, causing doors that drag across the track or latches that won’t seat. This is especially common on older river-corridor homes where the doors face east toward the water.
- Bowed frames from jalousie retrofits. When someone retrofitted a CGI insert into an original jalousie opening without squaring the rough opening first, the frame takes stress it was never designed for. We see bowed jambs and stress cracks on these older installs all over New Port Richey’s 1950s neighborhoods.
- Stuck or seized louver hardware on legacy CGI conversions. Some homeowners have frames converted from jalousie louver clips that no longer operate. The clips freeze, the louvers won’t close tight, and the owner is left with a window that can’t handle a bad afternoon thunderstorm, let alone anything stronger.
CGI Service in New Port Richey: What Local Conditions Mean for Your Equipment
New Port Richey sits roughly four miles from the open Gulf, and that single fact changes how CGI frames age. Salt-laden marine air accelerates corrosion on aluminum frames and hardware well ahead of manufacturer expectations. In the established neighborhoods along the Cotee River corridor, we routinely pull CGI frames at 10 or 12 years old that show pitting we’d expect at 20 years in Wesley Chapel. The other layer is code. New Port Richey falls within Florida’s wind-borne debris region designation. Under the Florida Building Code, replacement windows and exterior doors on applicable structures must meet impact-resistance or approved-shutter standards. What this means for CGI owners: if you live in a 1960s home between Grand Boulevard and the river with original single-pane units, you’re likely looking at an upgrade to impact-rated glass, not a like-for-like swap. And along the low-lying blocks near the Cotee in the historic downtown district, you hit a dual-compliance scenario. The parcel sits in both the wind-borne debris region and a FEMA AE flood zone, so the door replacement that looked simple on paper must meet impact requirements and flood-resistant sill and pan standards with positive drainage. We handle that combination regularly. Most inland Pasco contractors see it once a year, if that.
CGI Models & Products We Service in New Port Richey
We service and replace these CGI lines across New Port Richey and nearby areas: the Sentinel Series impact windows, Estate Collection casements and awnings, 900 Series sliding glass doors, and Classic Series single-hung and picture windows. We also provide CGI in Tarpon Springs for homeowners there. When we quote a CGI replacement, we put manufacturer lines side by side on paper so you can see exactly what you’re buying. For repairs, we source genuine CGI parts including rollers, locks, weatherstripping, and sash balances whenever they’re still available from the factory. When older hardware is discontinued, we use marine-grade stainless or high-quality aftermarket parts that hold up better in New Port Richey’s salt air than the originals did. We keep common CGI hardware stocked locally for fast turnaround, and what we don’t stock we can typically have within a few days.
CGI Service Pricing in New Port Richey
What you’ll pay depends on what your CGI unit needs. Here’s a straight look at the ranges we typically quote in New Port Richey:
- Hardware repair (rollers, locks, sash balances): $95 to $275
- Weatherstripping replacement: $80 to $220
- Glazing seal repair (cloudy glass, single pane): $180 to $400
- IGU (insulated glass unit) replacement: $250 to $600 per sash
- Full CGI impact window replacement: $850 to $1,450 per opening, depending on size and the frame work required
The big variable in New Port Richey is the rough opening. When we pull a 60-year-old jalousie frame, we often find out-of-square studs and corroded fasteners that need rebuilding before the new unit goes in. We’ll show you exactly what’s involved on paper before any work starts. Our free estimate covers the full scope. Call (813) 320-9346 and we’ll walk the job with you.
Serving New Port Richey, FL - Our Local Coverage Area
We’re based in the New Port Richey area and know this community well, and we offer CGI service in Oldsmar too. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in New Port Richey
New Port Richey Window Installation falls within Florida’s wind-borne debris region designation, which means replacement windows and doors on applicable structures must meet impact-resistance standards under the Florida Building Code. Most homes in the city, particularly those built after the code adopted the designation, will require impact-rated units or approved shutters. The exception is some older homes where the existing openings were never upgraded, but even then, we recommend impact-rated CGI windows because the next storm isn’t going to check your code status before it arrives. We’ll verify your specific property during the free estimate. Call (813) 320-9346 and we’ll confirm what applies to your home.
Salt-laden marine air from the Gulf, roughly four miles away, accelerates oxidation on aluminum frames and hardware, especially for homes along the Cotee River corridor where prevailing winds carry salt mist inland. The closer you are to open water, the faster factory finishes break down, which is why we see white powder and pitting on CGI bottom rails at 8 to 10 years in river-corridor neighborhoods versus 15 to 20 years in inland Pasco communities. We use marine-grade replacement hardware to slow the problem down. Call us at (813) 320-9346 if you’re seeing early corrosion and want to know your options.
You can replace just one window, but the Florida Building Code may require that the replacement opening meet current wind-borne debris standards, which often means an impact-rated unit rather than a like-for-like jalousie swap. We’ll tell you honestly whether a single-unit repair makes sense or if you’re better off addressing the worst openings now and planning the rest in phases. Our 90-Day Done Right Promise covers whichever path you choose. Call (813) 320-9346 for a straight answer on your specific opening.
In most cases, flood-resistant sills and pans apply only to door openings, not windows, so a window-only replacement typically won’t trigger FEMA’s flood-resistant requirements. However, if you’re also replacing an exterior door on a property in a FEMA AE flood zone near the Cotee River, that door will need a flood-resistant sill and pan with positive drainage. We handle both code pathways on the same job so you’re not chasing two contractors. For a clear read on your property, call (813) 320-9346.
For most jalousie-to-impact conversions, we recommend the CGI Sentinel Series impact casements. They handle the structural load of an out-of-square rough opening better than single-hung designs, and they seal tight against the salt air that eats older frames alive. We custom-order sizes to match your openings, rebuild the rough opening with pressure-treated bucks, and set the new units square. On a 1962 concrete-block home off Grand Boulevard near the Cotee River, we pulled three corroded original jalousie windows and replaced them with custom-sized CGI Sentinel casements, and the homeowner no longer fights stuck louver hardware or worries about wind-borne debris. For an exact recommendation and a price, call (813) 320-9346.
Service Areas Near New Port Richey
We provide New Port Richey service area coverage throughout the city and into nearby communities including Trinity, Holiday, Elfers, and Port Richey. If you’re on the water or in an older inland neighborhood, we’ll come out and take a look. For coastal work farther south, see CGI service in North Bay Village or CGI service in North Lauderdale.
Book Your CGI Service in New Port Richey Today
If your CGI windows or doors are corroding, binding, or fogging up, call (813) 320-9346 and schedule a free estimate. A live person answers, 24 hours a day. We’ll walk the job, put the numbers on paper, and if it needs to be in writing to be true, we will put it in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving New Port Richey since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.