Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Boca Raton, FL | TruePane Windows & Doors
We’re an independent CWS service provider working across Boca Raton and nearby areas like Deerfield Beach Cws service, and we handle everything from a sticky 700 Series roller to a full impact casement rebuild. The thing that separates CWS work here from anywhere else in Palm Beach County is the architectural review board. Nearly every job requires finish and style sign-off before a permit gets pulled, and we carry the swatch book to make that happen without a four-week restart. Call (813) 320-9346 for CWS service in Boca Raton.
Why Boca Raton Residents Choose Us for CWS Service
We’ve been inside hundreds of CWS-equipped homes throughout Boca Raton, and our field teams know these frames the way a mechanic knows a particular engine. Dale Kessler grew up in Seminole Heights and learned the glazing trade at Hillsborough Community College’s construction technology program, spending more time on the shop floor than in a classroom seat. That hands-on background shapes how we approach every CWS repair here. We don’t sell you a replacement when a factory hinge and a marine-grade butt block will hold for another decade. We also don’t patch a scored glazing channel that will leak again by August. Our CWS sales & service work covers Boca Raton’s planned communities, Intracoastal condos, and older Mizner-era neighborhoods near Palmetto Park. Background-checked, uniformed technicians measure every opening twice and write the repair scope on paper before work starts. If it needs to be in writing to be true, we will put it in writing.
Common CWS Windows & Doors Problems We Solve in Boca Raton
- Corrosion pitting on 900 Series casement hinge tracks. Within a mile of the Intracoastal or A1A, salt air works into the aluminum faster than inland. We see hinge-side frame pitting on CWS 900 Series impact casements in under ten years when non-marine-grade coatings were used. We replace the factory hinges, machine a butt block where the stile has eroded, and reinstall with original CWS stainless hardware.
- Roller and track fouling on 700 Series horizontal rollers. Boca West, Broken Sound, and other HOA communities keep their landscaping tight, which means fine sand and mulch debris ends up in slider tracks. CWS 700 Series rollers bind, then the door gets forced, and the rollers flat-spot. We clean the track, replace the rollers with genuine CWS parts, and reset the door so it closes square.
- Seal and glazing bead degradation on 800 Series single-hungs. Afternoon summer squalls punch through failed seals fast. We replace glazing beads and seals on CWS 800 Series units regularly, especially on western exposures that take the brunt of June storms.
- Balance shoe and tilt-latch breakage on older 800 Series units. The 1980s CBS homes around Palmetto Park and the original Arvida builds still run first-generation CWS 800s. Balance shoes wear out, tilt latches snap, and the sash drops or jams. We machine-match quality aftermarket balances on out-of-production series and tell you honestly whether the unit is worth saving.
- Failed multi-point locks on impact casements. Salt corrosion finds the lock mechanism on oceanfront and lakeside properties. A failed multi-point lock on a CWS 900 Series casement means the impact rating is compromised. We pull the factory lock set and replace it with genuine CWS components.
CWS Service in Boca Raton: What Local Conditions Mean for Your Equipment
Boca Raton’s HOA architectural boards reject the wrong bronze shade outright, and the wrong shade is not rare. The city’s developer palettes date to the 1970s Arvida communities, and each major community specified its own finish. Boca West requires a champagne bronze. Woodfield requires sandstone. Submit a dark bronze CWS frame where champagne bronze is on the approved list, and the architectural application gets returned to you, restarting a review cycle that can run four to eight weeks and delaying your permit pull by months. Our installers carry a finish swatch book that maps each major community’s approved CWS color, so we match the frame finish on the quote sheet before the ARC ever sees the application. That detail alone saves Boca Raton homeowners more time than any installation trick. It sits on top of the Florida Product Approval requirement every replacement unit must carry, and the City of Boca Raton permit that only follows ARC sign-off.
CWS Models & Products We Service in Boca Raton
We service the CWS 900 Series Impact Casement, the 800 Series Single-Hung, the 700 Series Horizontal Roller, and the 500 Series Fixed/Architectural. Structural and impact components get genuine CWS factory parts; casement hinges, multi-point locks, laminated glass. Aftermarket substitutes consistently fail Boca Raton wind-load tests, so we won’t install them where the rating matters. On out-of-production CWS series, we machine-match quality aftermarket seals and balances, and we say so plainly on the estimate. If your CWS frame shows salt-air pitting or the glazing channel is scored, we’ll tell you a full replacement beats a patch, and we’ll quote it both ways so the decision is yours.
CWS Service Pricing in Boca Raton
Most CWS repairs in Boca Raton run between $185 and $520 depending on the part and the frame condition. A straight roller replacement on a 700 Series slider lands on the lower end. A 900 Series casement hinge rebuild with a machined butt block runs toward the upper end, and a full multi-point lock replacement lands higher still because the genuine CWS lock set is not cheap. Labor in Boca Raton’s HOA communities often includes ARC documentation and photo submission, which we handle as part of the job. Every estimate is written and line-itemed before work starts, and we never leave a second appointment hanging. Call (813) 320-9346 for an exact quote; estimates are free.
Serving Boca Raton, FL - Our Local Coverage Area
We’re based in the Boca Raton area and know this community well, and we also provide Cws repair in Delray Beach. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Boca Raton
They hold up with the right maintenance, but the hinge tracks pinhole faster than inland installations like those we see with Coconut Creek Cws service. Salt air within a mile of the Intracoastal or A1A accelerates aluminum oxidation, and we routinely replace pitted 900 Series hinges on waterfront properties in under ten years. Genuine CWS stainless hardware gives you the longest run. Call (813) 320-9346 and we’ll inspect your frames and tell you what they need.
Yes. Boca West specifies champagne bronze on their approved CWS palette, and we carry a finish swatch book that maps every major Boca Raton community’s approved color, so the quote matches the ARC application from day one. Submitting the wrong bronze shade gets an architectural application rejected and restarts a four-to-eight-week review cycle. We keep that from happening.
The balance shoes and tilt latches on first-generation CWS 800 Series units wear out after decades of use, and the original builds near Palmetto Park are now forty years old. The sash drops because the balance no longer holds tension, or it sticks because a tilt latch snapped and left the sash off its track. We replace both with quality-matched parts and tell you if the unit’s glazing channel is too scored to save. Call (813) 320-9346 for an inspection.
Yes, both. Nearly every window and door replacement in Boca Raton’s HOA communities requires architectural review board approval on finish and style before the City of Boca Raton will process a building permit, and every replacement unit must carry a current Florida Product Approval number. We handle the ARC submission, the permit paperwork, and the post-install wind mitigation documentation so the inspection clears the first time.
Usually, if the frame itself is not pitted through. We replace the rollers and track guides with genuine CWS parts and clean the sand and salt fouling out of the track, which restores the door to smooth operation. If the frame shows deep salt-air pitting or the glazing channel is compromised, we’ll tell you flat out that a new impact slider is the better money. Call (813) 320-9346 for an honest read on your doors.
Service Areas Near Boca Raton
TruePane provides Boca Raton service area coverage and handles CWS calls in the surrounding communities as well. We run CWS service in Boynton Beach for coastal condos and single-family homes, and we cover CWS service in Briny Breezes for the smaller oceanfront properties along that stretch of A1A. If you’re in a gated community off Glades Road, or in the CBD district near Mizner Park, call us and we’ll work you into the schedule.
Book Your CWS Service in Boca Raton Today
We’re independent, not manufacturer-affiliated, and we service CWS windows and doors across Boca Raton and Pompano Beach Cws service with factory parts where they matter and straight answers where they don’t. Call (813) 320-9346 to schedule your free estimate. A live person answers, every day, every hour.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boca Raton and the broader Palm Beach County community since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After