Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Oakland Park, FL | TruePane Windows & Doors
We service CWS windows and doors throughout Oakland Park, and most repair calls are completed in a single visit. What makes our CWS work different here is simple: Oakland Park’s jalousie-heavy 1950s-1970s housing stock, combined with Broward County’s High Velocity Hurricane Zone code, means most CWS service calls in this city end in a full replacement conversation rather than a parts swap. We’re an independent CWS service provider, not manufacturer-affiliated, which means we give you the straight answer on repair versus replacement. Call (813) 320-9346 for a free estimate.
Why Oakland Park Residents Choose Us for CWS Service
Dale Kessler grew up in Seminole Heights and spent the better part of two decades measuring, setting, and sealing windows and doors across the Tampa Bay area before founding TruePane in 2008. Our crews have logged thousands of CWS window and door service hours across Broward County’s HVHZ, which means we know what happens to CWS aluminum frames in coastal Florida heat and salt air. When you call us about a CWS slider or jalousie window in Oakland Park, the person answering the phone has likely worked on a similar unit in a similar CBS ranch within the last month. We stock common CWS components locally, keep OEM parts for newer impact lines, and carry marine-grade aftermarket components for the older discontinued series that manufacturers no longer support. If the pane is not true, the job is not done.
Common CWS Windows & Doors Problems We Solve in Oakland Park
- White aluminum frame oxidation on CWS 8000 Series sliders. Oakland Park sits 3-4 miles west of the Atlantic, close enough that salt-laden air accelerates corrosion on standard aluminum frames within 5-10 years, especially on east-facing exposures. We see white anodized CWS frames pitting and flaking on sliders along NE 12th Avenue and west of Dixie Highway.
- Seized jalousie torque bars and broken louver clips. The 1960s-70s CWS jalousie units still hanging in Oakland Park’s original ranch homes often cannot hold a closed position because the torque bars are consumed by galvanic corrosion. This is not a repair job worth doing; it is a replacement trigger.
- Binding rollers and pitted channels on CWS sliding door bottom tracks. Wind-blown sand and salt collect in the bottom tracks of older CWS sliding doors on Oakland Park’s flat, low-lying lots, causing rollers to bind and aluminum channels to pit. We rarely see this failure pattern inland.
- Non-pressure-rated CWS door jambs on pre-1994 CBS ranchers. Many original CWS door frames installed on Oakland Park’s CBS homes used non-pressure-rated jambs that no longer pass HVHZ code, even when the concrete slab is in good shape. Full frame replacement is the only code-compliant fix.
- Jalousie-to-impact conversion on block-set openings. Oakland Park’s original CWS jalousie windows were often set directly into concrete block, which means replacement requires re-anchoring the rough opening and haunching the new frame flush to the CBS. This is the single most common CWS service job we perform in Oakland Park.
CWS Service in Oakland Park: What Local Conditions Mean for Your Equipment
Oakland Park’s original 1950s-1970s CBS ranches often have jalousie windows that are not only uninsurable for wind mitigation but also set directly into concrete block. That detail changes everything about how a CWS replacement works here. When we handle Oakland Park Window Installation for a CWS jalousie unit, we almost always re-anchor the rough opening with epoxy-set bolts and haunch the frame flush to the CBS before the new window ever goes in. This is not a detail that applies to neighboring tree-covered Fort Lauderdale neighborhoods built after 1980, where wood framing and standard rough openings make replacement a near drop-in job. In Oakland Park, the block is part of the window opening, and if you skip the haunching, the install will fail inspection and void the wind mitigation credit. We do it right the first time, with the paperwork to prove it.
Last month our crew pulled a set of 1968 CWS jalousie windows from a ranch off NE 34th Court near Andrews Avenue. Every torque bar was seized with galvanic corrosion, and the block openings were half an inch out of square. We reframed the openings with pressure-treated bucks, set CWS 900 Series impact casements in white anodized finish, and then walked the owner through the OIR-B1-1802 wind mitigation form, cutting their Citizens premium by over 40 percent. That is what a complete CWS job in Oakland Park looks like.
CWS Models & Products We Service in Oakland Park
We service the full range of CWS product lines, including the CWS 8000 Series Aluminum Sliding Windows, CWS 500 Series Single Hung Windows, CWS Jalousie Louvered Windows, and CWS 900 Series Impact Casement Windows. For newer impact-rated lines, we use genuine CWS OEM parts when available. For discontinued jalousie and single-pane CWS series, we machine or source high-grade marine-aluminum aftermarket components because the originals are either unavailable or not worth reinstalling in an HVHZ environment. On non-impact CWS units, we push full replacement rather than repair, because even a perfect mechanical fix cannot meet Miami-Dade wind-borne debris code. Our CWS sales & service experience means you get an honest recommendation on whether a repair makes sense or a replacement is the only path to code compliance.
CWS Service Pricing in Oakland Park
CWS service pricing in Oakland Park depends on the model, the failure mode, and whether the job stays a repair or becomes a replacement. A simple CWS 500 Series single hung balance or roller replacement typically runs $180-$280. Jalousie hardware repair, when it is possible at all, starts around $150 but rarely makes sense on Oakland Park’s 1960s units. A full CWS jalousie-to-impact conversion, which includes re-anchoring the block opening, new impact casements, and the wind mitigation documentation, starts around $1,100 per opening and goes up based on size and finish. Every estimate is free and written line-item, so you know what you are paying before we start. Call (813) 320-9346 to schedule your free estimate in Oakland Park.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Windows & Doors in Oakland Park
Original CWS jalousie windows fail wind mitigation in Oakland Park because they are louvered, single-pane, and provide zero opening protection against wind-borne debris. Broward County sits entirely inside Florida’s High Velocity Hurricane Zone, so every window and door must carry a Miami-Dade Notice of Acceptance or Florida Product Approval. Jalousie units from the CWS era do not meet that standard and never will. Replacing them with CWS 900 Series impact casements is the only way to pass the OIR-B1-1802 inspection and capture the full windstorm premium discount. Call (813) 320-9346 for an exact quote, estimates are free.
No, we do not remove the concrete block. We re-anchor the rough opening with epoxy-set bolts, install pressure-treated bucks where needed, and haunch the new CWS frame flush to the existing CBS. This preserves the structural integrity of the block wall while creating a level, square, code-compliant opening for the impact window, a key step in any Oakland Park Door Installation or window conversion. The work is more involved than a standard replacement, which is why Oakland Park CWS conversions cost more than similar jobs in frame-built homes.
If the CWS slider track is pitted from salt and wind-blown sand, the honest answer is usually replacement. Replacing rollers on a pitted track just means the new rollers will bind again within a year, and the cost of replacing the track and rollers on an older non-impact CWS slider starts to approach the cost of a new impact-rated window. On non-impact CWS units, we recommend full replacement because even a perfect mechanical repair cannot meet Miami-Dade HVHZ code. Call (813) 320-9346 and we will give you a straight answer on your specific unit.
Not automatically. The full windstorm premium discount requires completing the OIR-B1-1802 wind mitigation inspection form, which documents that every opening in the home has HVHZ-compliant impact protection. If you replace the CWS windows and doors but leave the garage door or a secondary entry unprotected, the discount is reduced. We walk Oakland Park homeowners through the entire documentation process after every impact installation, so you know exactly what your inspector will see before they arrive. Call (813) 320-9346 for guidance on your home’s situation.
In Oakland Park’s salt-laden air, standard white aluminum CWS frames typically show visible oxidation within 5 to 10 years, with east-facing elevations corroding fastest. Anodized or vinyl-clad impact frames last significantly longer in this environment, which is why we recommend those finishes for any CWS replacement in Oakland Park. If you are seeing flaking or pitting on your existing CWS frames, the clock is already running on replacement. Call (813) 320-9346 for a free estimate while you still have options.
Service Areas Near Oakland Park
We service CWS windows and doors across Oakland Park and the surrounding communities. Our Oakland Park service area covers the full city, from the Dixie Highway corridor east to Andrews Avenue and the neighborhoods along Commercial Boulevard. We also serve Wilton Manors, Fort Lauderdale, Pompano Beach, and Lauderdale-by-the-Sea. For neighbors to the south, see our CWS service in Ocean Breeze page, and for coastal properties to the north, our CWS service in Ocean Ridge coverage has you covered.
Book Your CWS Service in Oakland Park Today
If your CWS windows or doors in Oakland Park are corroding, binding, or failing wind mitigation, call (813) 320-9346 to schedule a free estimate. A live person answers every call, and we will give you a straight recommendation on repair versus replacement. We’ll be there when we say, and if it needs to be in writing to be true, we will put it in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Oakland Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After