Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in Plantation, FL | TruePane Windows & Doors
We provide our Cws services across Plantation, from 8000 Series slider rebuilds to full-frame HVHZ replacements. TruePane Windows & Doors is not a CWS dealer and not manufacturer-affiliated; we are a local glazing company that has pulled failed CWS glass packs and rebuilt CWS sashes in Plantation for nearly two decades. The thing that separates our CWS work here is simple: we know which CWS frame extrusions this era of CBS ranch home actually uses when a wind-mitigation inspection fails and the homeowner needs a fix that passes code. Call (813) 320-9346 for a free estimate.
Why Plantation Residents Choose Us for CWS Service
Dale Kessler founded TruePane in 2008 after more than twenty years of setting and sealing windows across the Tampa Bay and South Florida markets, and the rule he keeps on the whiteboard has never changed: if the pane is not true, the job is not done. Homeowners call us for Cws repair in Fort Lauderdale and Plantation because we speak the local building code fluently and we do not flinch at a 1973 extrusion that has been out of production for thirty years. We match replacement hardware against the actual frame profile rather than guessing, and we source OEM-style corner keys, rollers, and wedge gaskets when the frame is still square and serviceable. When it is not, we say so plainly and quote a compliant replacement. Every job carries our 90-Day Done Right Promise, both manufacturer warranty layers registered in writing before our truck leaves your driveway.
Common CWS Windows & Doors Problems We Solve in Plantation
- Corroded jamb weatherstripping channels. Plantation’s salt-laden humidity eats CWS aluminum tracks fast. We see vinyl pile inserts shattered and wedged inside channels after as little as five years of exposure. The sash will not slide, and forcing it scores the track. We clean, re-channel, and replace with a profile-matched pile that actually seats.
- Leaking masonry-set CWS frames on 8-foot sliders. Original bead sealant from the 1970s was never rated for HVHZ wind-driven rain. Water gets behind the concrete-to-frame interface and shows up as recurring drywall staining along the slider base. We pull the trim, reset the frame with a modern structural sealant, and re-anchor to the block opening.
- Snapped jalousie hardware and zinc-plated crank arms. Code-required panel closures put real torque through fifty-year-old arms, and they shear. A permitted jalousie removal in Plantation always becomes a full-frame replacement because Broward County will not approve repairs to a prohibited assembly. We handle the entire swap, including the stucco patch, in one visit.
- Pre-1994 CWS fixed picture windows flexing in storms. Cat 1 winds bow the glass visibly, and wind-mitigation inspectors flag it. We replace the glass pack with a Florida Product Approval-listed laminated insert or swap the unit to a CWS-compatible impact assembly, then provide the paperwork the insurer wants.
- Failed roller pins on CWS 8000 sliders. Galvanized steel rusts through nylon wheels in Plantation’s humidity. The sash rides on bare aluminum and digs into the track. Off NW 6th Street in the Plantation Colony neighborhood, our lead tech opened a 1973 slider where both pins had failed this way. We replaced the bottom-track insert with a stainless aftermarket equivalent and reset the jamb with an impact-rated combo pack. The final wind-mitigation report dropped that homeowner’s premium by 34%.
CWS Service in Plantation: What Local Conditions Mean for Your Equipment
The original 1960s PGA-subdivision lots west of University Drive in Plantation were platted with 78-inch masonry openings sized for jalousie rows. Today’s HVHZ-rated CWS casement units require a minimum 24-inch frame jamb on each side, which leaves roughly a 6-inch daylight loss that code officials only flag in Plantation’s concrete-block ranch inventory. You do not see this in Davie or Sunrise, where frame construction gives you more jamb room and the opening math lands differently. For a Plantation homeowner, that means a replacement quote has to account for the stucco work, the jamb build-out, and the glass-area math before it means anything. We measure every opening twice and do that arithmetic on paper at your kitchen table, so the number you get is the number the permit reflects.
CWS Models & Products We Service in Plantation
We service the CWS 8000 Series sliders, 7000 Series casement, 6000 Series single hung, and 4000 Series fixed and picture windows, including Cws service in Margate and nearby areas. For each one we match against the actual CWS extrusion profile and source OEM-style corner keys, rollers, wedge gaskets, and lock hardware when the frame is still square and serviceable. But for Plantation’s HVHZ threshold we default to a Florida Product Approval-listed aftermarket laminated insert or a full-frame CWS-compatible impact unit rather than gambling a forty-year-old frame back into code. Authorized installer status with more than a dozen manufacturer lines, including PGT and CGI, means you see side-by-side quotes on paper before you decide.
CWS Service Pricing in Plantation
Service calls in Plantation generally start around $89 for a Maintenance Visit and run from there depending on what is actually wrong. Hardware replacement on a CWS slider or casement typically falls between $180 and $450, while a full-frame HVHZ replacement runs $1,200 to $3,200 per opening depending on size, framing condition, and stucco scope. You should expect stucco patching to appear on more Plantation quotes than a comparable job in Sunrise, because the concrete-block ranch construction hides more behind the trim. We write line-item quotes with both warranty durations stated, and we stand behind the number. Call (813) 320-9346 for an exact figure, and ask about the permanent 5% discount for seniors and veterans.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Plantation
No. Jalousie windows are explicitly prohibited under HVHZ code for any permitted scope of work in Plantation. You cannot get a permit to add impact panels over them, and any renovation permit you pull will make those jalousies a mandatory replacement line item. We remove the entire louver assembly and install a compliant CWS-compatible impact unit with the required full-frame work done in one visit. Call (813) 320-9346 to get a replacement quote.
Salt-laden humidity plus year-round UV breaks down the zinc-plated operator arms and gear housings at roughly twice the rate we see in Central Florida. The crank mechanism binds, then strips, and the sash will not seal. We replace the operator assembly with a stainless or OEM-style upgraded part and re-register the sash so it closes clean against the new weatherstripping. If it is the third operator in ten years, we will tell you honestly and quote a replacement instead.
If the frame is square and the seal failure is limited to the insulated glass unit, we can usually replace the glass pack without pulling the frame. The catch is that in Plantation, any glass replacement on an opening that is not already impact-rated may push you into a laminated insert to meet current code. We will open the sash, check the frame for hidden corrosion, and show you the least expensive compliant option before any work begins.
Plantation sits inside Broward County’s High Velocity Hurricane Zone, so any replacement slider has to carry a Miami-Dade NOA or Florida Product Approval. That means we cannot set a standard non-impact slider in an opening that previously had one, even if you just want to match what was there. We specify the compliant product in your quote and provide the opening-protection documentation your insurer needs to apply credits. Most Plantation homeowners see real premium reductions after the final inspection clears.
Because Plantation’s ranch housing stock is mostly concrete block and stucco, and pulling a masonry-set frame opens the stucco face far more than removing trim from a wood-frame opening. The 78-inch jalousie openings common west of University Drive also require jamb build-outs that eat into the surrounding stucco. We include that repair scope in the line-item quote up front, so there is no surprise charge after the frame goes in. If it needs to be in writing to be true, we will put it in writing. Call (813) 320-9346 for a free estimate.
Service Areas Near Plantation
TruePane runs CWS service calls throughout Plantation and into the surrounding Broward communities, including Sunrise, Davie, Lauderhill, Tamarac, and Cooper City. We also cover the broader South Florida corridor. If you are looking for our other Florida locations, see CWS service in Plant City or CWS service in Polk City. Our Plantation crews know the local code cycle and the housing stock, and we will be there when we say.
Book Your CWS Service in Plantation Today
If you have a CWS window or door that is failing in Plantation, call (813) 320-9346. We will schedule a technician, measure the opening, and put the repair or replacement numbers in writing. Free estimates, line-item pricing, and a live person on the phone every time you call.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation and the broader South Florida market since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.