Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Windows & Doors in Golf, FL | TruePane Windows & Doors
We provide independent ES Windows service across Golf, Florida, and the one thing that separates our work here is knowing the village’s dual review process before we ever set a ladder. Every Window Installation - Golf and door replacement must clear Palm Beach County’s building inspection program and the village’s own architectural review, which means finish selection and paperwork timing matter as much as the glass itself. Call (813) 320-9346 for a free estimate from a crew that has already worked through that process on Golf Road.
Why Golf Residents Choose Us for ES Windows Service
Golf is not a tract-home market. The houses here are custom builds from the 1960s through the early 1980s, mostly set back on large lots around the Country Club of the Palm Beaches, and nearly all of them carry original ES Windows or another high-end line sized to rough openings that no off-the-shelf unit will fit. We know those openings because we have measured them. Our techs carry factory-trained knowledge of ES Windows’ European-style gasketing, multi-point hardware, and narrow-sightline profiles, but we are an independent service provider, not an authorized dealer. That independence means we quote honestly on repair versus replacement without a manufacturer pushing a sale. Dale Kessler grew up in Seminole Heights and has spent the better part of two decades measuring, setting, and sealing windows across Florida; he still lives about six blocks from where he learned to ride a bike, and he runs this company with the same rule his father kept: a callback is a character flaw, not just an inconvenience. Our ES Windows sales & service work in Golf is the same work we would do on our own mothers’ houses, just with more permit paperwork.
Common ES Windows Windows & Doors Problems We Solve in Golf
Salt-laden air a few miles from the Intracoastal does things to window hardware that inland installers never see. These are the failures we address most often in Golf:
- Powder-coated aluminum frame pitting at the sill. Golf’s southeast exposure off the country club lake carries salt that settles into the bottom rail of ES Windows frames. The powder coat eventually pits, the gasket loses compression, and wind-driven rain from summer squalls finds a path inside. We strip, treat, and regasket where the frame is sound, and replace the unit when the pitting has compromised the extrusion.
- Multi-point locking hardware binding on ES Windows 8400 Series casements. Years of humidity and salt cause the lock stile to stay engaged even when the primary handle spins free. Golf homeowners call this “the window that won’t open,” and it is almost always a hardware or linkage issue, not a frame failure.
- Roller assemblies wearing unevenly on ES Windows 900 Series sliders. Golf’s custom home slabs were poured decades ago, and many have settled. A door that drags on the center rail and fogs the interlock weatherstrip is a roller and alignment problem, and we carry OEM-equivalent rollers sized for the 900 Series track profile.
- Failed wind mitigation inspections on original clear anodized frames. Miter joint seals degrade from UV and salt, corner keys loosen, and the unit’s design pressure rating drops. When a Golf homeowner gets flagged on a wind mitigation inspection, we are often the second call after the first contractor told them the whole frame had to go.
- Salt jacking at the sill. This is the slow, quiet killer on ES Windows fixed units in Golf. Salt corrosion expands inside the sill track and pushes the frame out of square. The glass can still look fine while the frame is no longer doing its job. We catch this during our repair calls because we check the sill before we quote anything.
ES Windows Service in Golf: What Local Conditions Mean for Your Equipment
Here is something most pages about ES Windows will not tell you: Golf is one of the only Palm Beach County municipalities where the county itself administers the building inspection program under an interlocal agreement, but every replacement window must also pass the village’s own architectural review oriented to its mid-century custom-home aesthetic. That is a dual layer most window companies in neighboring cities never encounter. What it means for an ES Windows owner is practical. You may want a standard white finish because it is the cheapest option available, but Golf’s architectural review board often requires a bronze or champagne anodized finish to match the surrounding homes. That decision has to happen before the permit moves, and county inspectors do not prioritize a 250-resident village when they are scheduling. A contractor who does not know this sequence will let a homeowner pick the wrong finish, get a rejection, and then wait three weeks for a rescheduled inspection while the opening sits covered in plywood. We plan the finish selection and the permit sequence before we order parts. If it needs to be in writing to be true, we will put it in writing.
ES Windows Models & Products We Service in Golf
Our crews service the full range of ES Windows product lines found in Golf’s custom homes, including the ES Windows 8400 Series French Casement, the ES Windows 900 Series Sliding Glass Door, the ES Windows 6800 Series Awning, and the ES Windows 5470 Series Impact Fixed Window. We source genuine ES Windows hardware and gaskets where available to preserve the exact narrow-sightline and multi-point action, but we are honest about lead times. When an OEM part is eight weeks out and a homeowner has a closing deadline, we use a vetted aftermarket equivalent and tell you exactly what we are installing before the work starts. For common Golf failures like 900 Series rollers and 8400 Series lock hardware, we keep parts stocked locally so we are not waiting on a freight truck from out of state.
Hurricane Impact Windows
Golf sits in Palm Beach County’s hurricane exposure zone, which makes impact-rated glazing or approved storm protection a code mandate, not an upgrade. We install ES Windows 5470 Series impact fixed units and other impact-rated lines to meet current Florida Building Code wind-load requirements, and we pull the permits and schedule the inspections for every job.
Historic Window Restoration
Golf’s housing stock is mid-century custom, and the architectural review board pays attention to what goes back in. We restore original ES Windows frames where the extrusions are still structurally sound and impact-rated, replacing gaskets, hardware, and glass while preserving the original sightlines and finish profile.
Full Frame Replacement
When a frame fails wind-load recertification or shows salt jacking at the sill, we do not patch it. We replace it. Our crew pulled a failed ES Windows 6800 Series awning on a 1972 custom home just north of Golf Road, where the powder-coated frame had salt-pitted along the bottom rail from decades of southeast exposure off the country club lake. We installed a new ES Windows 5470 Series impact fixed unit sized to the original rough opening with a bronze anodized finish approved by the architectural review board, and reset the sill flashing to meet current Palm Beach County impact-resistance requirements.
ES Windows Service Pricing in Golf
What you will pay depends on what we find when we open the frame. A gasket replacement or hardware rebuild on an ES Windows 8400 Series casement runs lower than a full frame replacement with impact glass, and a 900 Series slider roller job is a different number than a sill rebuild. Here are the ranges we typically see in Golf:
| Service | Typical Range in Golf |
|---|---|
| Hardware rebuild (multi-point lock, linkage) | $140 - $320 |
| Gasket and weatherseal replacement | $120 - $280 |
| Roller assembly replacement (900 Series slider) | $180 - $360 |
| Sill repair and regasketing | $250 - $520 |
| Full frame replacement with impact glass | $1,800 - $4,200 per opening |
| Full home window replacement (custom Golf home) | $28,000 - $75,000+ |
These are working ranges, not quotes. The free estimate includes a full inspection of every opening, a written line-item breakdown, and finish options that will actually pass Golf’s architectural review. Call (813) 320-9346 to schedule yours.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in Golf
Yes. Golf falls under Palm Beach County’s hurricane exposure zone, and Florida Building Code requires impact-rated glazing or approved storm protection on every exterior opening when windows or doors are replaced under permit. There is no elevation exception in Golf. We verify the required design pressure rating for each opening during the estimate and pull permits before any work starts. Call (813) 320-9346 for an exact quote, and we’ll check your current impact ratings for free.
Sometimes, but not always. The existing frame must be structurally sound, have its original miter joint integrity intact, and be rated to carry the heavier impact glass under current wind-load requirements. In Golf, salt pitting at the sill or corner key loosening from UV degradation often means the frame will not pass a wind-load recertification, and we will tell you that plainly. We do not spend your money on glass that a code inspector will reject. Call (813) 320-9346 and we’ll assess the frames before you order anything.
A single-opening replacement typically takes one day of installation, but the full timeline from estimate to final inspection runs two to five weeks in Golf because of the dual review layer. The architectural review board must approve the finish before the permit advances, and Palm Beach County inspectors do not prioritize a 250-resident village. We sequence the paperwork so the finish approval and permit application move together, which saves about two weeks compared to contractors who file sequentially. Call (813) 320-9346 for a project timeline specific to your address.
Mostly yes. Golf’s custom homes from the 1960s through the early 1980s were built with non-standard rough openings sized around the original window specifications, not today’s modular construction standards. Off-the-shelf impact units almost never fit without reframing the opening. We measure every opening twice and order ES Windows units cut to the original rough opening dimensions, which preserves the mid-century sightlines and keeps the architectural review board happy. Call (813) 320-9346 and we’ll measure before you buy anything.
Yes. We order ES Windows frames in the bronze and champagne anodized finishes the village’s architectural review board typically requires for mid-century custom homes, and we quote finish options side by side on paper before you commit. The finish choice is often the difference between a permit that sails through and one that stalls for three weeks. We’ll show you exactly what each finish looks like against your existing frames. Call (813) 320-9346 to see finish samples at your home.
Service Areas Near Golf
We serve Golf and the surrounding Palm Beach County communities, including Acacia Villas, Alafaya, and nearby villages where custom-home window work carries the same dual review requirements. If you are a few miles out and wondering whether we cover your street, we do. Our Golf service area page lists the streets we work regularly. We also run crews through ES Windows service in Greenacres and ES Windows service in Groveland for homeowners who need the same ES Windows expertise a short drive away.
Book Your ES Windows Service in Golf Today
Call (813) 320-9346 to schedule your free estimate. We answer the phone with a live person, we show up when we say, and we put every warranty registration in writing before the truck leaves the driveway. The Keystone Standard applies to every job in Golf, and the 90-Day Done Right Promise is the baseline, not the sales pitch.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf, Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After