Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Windows & Doors in South Palm Beach, FL | TruePane Windows & Doors
We provide independent ES Windows service across South Palm Beach, from the oceanfront towers on South Ocean Boulevard to the Intracoastal-facing buildings on the west side of A1A. The one thing that makes our window and door work here different is the dual-gatekeeper reality: nearly every job in town needs both a condo board architectural approval and a Town of South Palm Beach permit before the first frame gets ordered. If your ES Windows sliders are seizing up or your casements won’t crank, call (813) 320-9346 for a straight answer and a no-cost estimate.
We’re an independent service provider, not an ES Windows dealer or factory affiliate. That matters in South Palm Beach, where your building’s approved product list decides what can go in your openings before any contractor does. We work with ES Windows OEM hardware where it’s available and proven aftermarket components where factory lead times would leave your unit exposed. And we’ve been doing this long enough to tell you plainly when a frame deserves repair and when it’s done.
Why South Palm Beach Residents Choose Us for ES Windows Service
Our field techs have opened, repaired, and replaced hundreds of ES Windows units in South Florida’s condominium and oceanfront settings. That experience matters here because South Palm Beach is not like Lake Worth or Lantana. The housing stock is almost entirely mid-rise and high-rise condominium buildings from the 1960s through the 1980s, and most still carry original non-impact aluminum sliding glass doors, jalousie windows, or single-pane aluminum frames that fall well short of post-Andrew Florida Building Code standards.
Dale Kessler founded TruePane in 2008 after years of seeing out-of-true installs and voided warranties on the Gulf side. He grew up in Seminole Heights and learned the glazing trade on the shop floor at Hillsborough Community College’s construction technology program. The rule on Dale’s whiteboard has always been the same: if the pane is not true, the job is not done. We write our warranty terms down and register both manufacturer warranty layers before the truck leaves the driveway, and our 90-Day Done Right Promise is in writing too. If it needs to be in writing to be true, we will put it in writing.
South Palm Beach residents call us because we understand the specific pain of owning a unit in a 40- or 50-year-old building where the board, the Town, and the salt air all have a say in what happens to your windows. We handle the paperwork, the architectural submittals, and the Window Installation - South Palm Beach, so you don’t end up with a rejected quote and a corroded frame sitting in limbo for another season.
Common ES Windows Windows & Doors Problems We Solve in South Palm Beach
- Salt-corroded sill tracks and jambs on original ES Windows sliders. The constant Atlantic and Intracoastal salt spray eats through the thin anodized finish on older aluminum frames. Within ten to fifteen years of install, rollers get gritty, doors seize, and locks stop engaging. We see this on 8800 Series sliders in buildings where the original tracks were never upgraded to a marine-grade finish.
- Warped or delaminating vinyl and aluminum frames on east- and west-facing elevations. Direct morning and afternoon sun on oceanfront units stresses older ES Windows impact frames. The thermal expansion and contraction eventually causes warping that keeps sashes from seating tight against the weatherstripping, which then lets water and air through.
- Failed insulated glass seals, or fogging between panes. Fixed picture windows in high-rise punch openings take brutal thermal shock from intense coastal sunlight and salt-laden condensation. Once the seal goes, the glass fogs and the only real fix is a new sealed IG unit, sized for the existing opening.
- Non-compliant original ES Windows jalousie frames in utility rooms and balcony enclosures. These older louvered units in 1960s and 70s towers no longer meet Florida Building Code impact standards. A routine replacement triggers immediate permit and HOA architectural rejection unless the replacement product matches the building’s current NOA-approved list.
- Seized or stripped hardware on ES Windows awning and casement operators. Salt rust binds crank mechanisms and hinge arms on ocean-facing windows. We replace rusted operators with 316 stainless steel components where possible, because standard zinc hardware will fail again in a couple of seasons.
We also track down the less obvious problem: weep holes clogged with wind-blown sand and salt crust. When those little drainage channels block, water sits inside the ES Windows track and accelerates frame pitting, especially on lower floors facing the beach. A quick clearing and a re-level of the track can add years to a window that’s still structurally sound.
ES Windows Service in South Palm Beach: What Local Conditions Mean for Your Equipment
South Palm Beach sits on a barrier island barely a few hundred yards wide. The Atlantic is on one side, the Intracoastal Waterway on the other. Your windows get hit with salt-laden air from both directions at once, year-round. That’s why original ES Windows aluminum frames from the 1970s fail faster here than identical units three miles inland in Lake Worth. It’s also why we don’t take shortcuts on material selection. We specify 316 stainless steel rollers and hinges on every replacement we do in South Palm Beach, because marine-grade hardware is the only thing that holds up when the building’s east windows face the ocean and the west windows face the Intracoastal.
Take The Barclay on South Ocean Boulevard. In a 12th-floor unit there, our tech found the original ES Windows 8800 sliders so salt-pitted that the interlock stiles had corroded into each other. The track itself had to be ground out and re-leveled because wind-driven spray had eroded the concrete under the sill. We used a self-leveling epoxy patch before setting the new frame. That’s the difference between patching a symptom and fixing what South Palm Beach actually does to a window.
ES Windows Models & Products We Service in South Palm Beach
We service the ES Windows product lines we see most often in South Palm Beach condo towers: the 8800 Series Aluminum Impact Sliding Glass Door, the 9700 Series Impact Casement Window, the 2200 Series Aluminum Single-Hung Window, and the 5500 Series Awning Window. Our parts approach is straightforward. We use ES Windows OEM hardware, including rollers, locking mechanisms, and impact-rated sashes, wherever the factory can supply them quickly enough for a scheduled install. For obsolete or long-lead factory parts, we substitute proven aftermarket components with equal or better corrosion resistance, especially 316 stainless steel rollers and hinges.
Our rule in this town never wavers: if the frame is structurally sound and meets current wind-load requirements, we repair it. If it doesn’t, we say so plainly and recommend full replacement with current ES Windows impact units. Keeping a failing frame in place just to save money now means another HOA rejection and more water intrusion later.
ES Windows Service Pricing in South Palm Beach
What drives ES Windows service cost in South Palm Beach is the building itself. That high-rise condominium dynamic means pricing includes architectural submittal preparation, Town permit coordination, daily access scheduling with your building’s management, and in many cases customized frame finishes in bronze or champagne anodize to match the board’s approved palette. A straightforward roller and track replacement on an 8800 slider typically runs between $340 and $610 depending on the sill condition and hardware. A full impact window replacement with ES Windows products, with custom sizing for non-standard rough openings, usually falls between $1,900 and $4,200 per opening when you factor in finish-matching and installation labor. We also offer a free written repair estimate, a maintenance check, and a permanent 5% discount for seniors and veterans.
Every estimate we write is itemized on paper, with the manufacturer line listed side by side so you see exactly what you’re buying. Call (813) 320-9346 for a free estimate and a straight answer on whether repair or replacement is right for your building’s constraints.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - ES Windows Windows & Doors in South Palm Beach
The rejection usually has nothing to do with the product and everything to do with the submittal. South Palm Beach condo boards maintain an approved product list with exact ES Windows frame finishes and glass tier specifications. If the contractor’s quote doesn’t match that list or the NOA documents aren’t attached correctly, the board’s architectural committee will reject it. Our team verifies the building’s approved list before ordering anything, so the submittal goes through the first time. Call (813) 320-9346 and we’ll walk you through what your specific building requires.
Usually, yes. If the door panel and frame are still square and meet wind-load requirements, we can replace the rollers, clean the track, and re-lubricate or replace the locking mechanism. In South Palm Beach we specify 316 stainless steel rollers because zinc-plated rollers will seize again within a few seasons. If the track itself is pitted beyond re-leveling, we’ll tell you that too, and what the full replacement would cost.
The fastest path is to pre-verify your building’s approved product list and submit the full NOA specification package with the architectural request. In South Palm Beach, this process routinely adds four to eight weeks before the permit-ready job can even be ordered. We prepare the submittal paperwork for you, so the board sees a complete package the first time instead of an incomplete quote that stalls another month. Call (813) 320-9346 and we’ll start the verification step for your building right away.
If the window frame itself still meets current Florida Building Code impact requirements, replacing the operator hardware and hinge arms is code-compliant and far less expensive than a full sash replacement. We use 316 stainless or coated aluminum operators for oceanfront units. If the frame has corroded at the jamb or the sash no longer seats square, the window may not pass a wind-mitigation inspection even with new hardware, and we’ll tell you that in plain terms.
We work on every building type in South Palm Beach, including the small number of low-rise townhomes and the oceanfront high-rises. The permitting and approval process changes with each building, and we handle that end of the work regardless of the structure. If your opening needs a code-compliant ES Windows unit, we can handle Door Installation - South Palm Beach from the first measurement to the final inspection.
Service Areas Near South Palm Beach
Beyond South Palm Beach, our ES Windows service crews travel regularly to a number of nearby towns, including ES Windows service in South Pasadena, ES Windows service in Southwest Ranches, Altamonte Springs, Anna Maria, and Apollo Beach. If you’re on the barrier island or just inland, call us and we’ll tell you when we can be there.
You can also learn more about our wider South Palm Beach service area or our overall ES Windows sales & service work.
Book Your ES Windows Service in South Palm Beach Today
If your ES Windows slider is grinding, your casement won’t crank, or your building’s board just sent a notice about non-compliant openings, don’t wait another season. The salt air doesn’t take a break. Call (813) 320-9346 now and get a straight answer, a free estimate, and a date on the calendar.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Palm Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.