Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Edgewood, FL | TruePane Windows & Doors
We’re an independent PGT service provider working across Edgewood, and we handle everything from single-sash repairs to full-frame replacements. What makes our PGT work different here: Edgewood sits under Orlando International Airport’s flight paths, so we’re not just swapping glass out - we’re specifying laminated units rated STC 35 or higher because that’s what actually solves the problem in this city. Our Window Installation in Edgewood covers PGT WinGuard, PremierVue, SpectraGuard, and 5500 Series lines, and we handle repairs and service throughout the city too. Call us at (813) 320-9346 for a repair assessment or replacement quote.
Why Edgewood Residents Choose Us for PGT Service
We’ve repaired and installed PGT windows and doors across Central Florida for over 15 years, and Edgewood’s housing stock keeps us honest. The post-WWII through 1970s concrete block ranches that dominate this city were originally built with aluminum single-pane or jalousie windows - and when one of those gets swapped for a PGT WinGuard unit, the rough opening is rarely square, the jamb depth is tight, and the fastening surface is block, not wood framing. We know what that means for flashing, for shimming, and for leak control. Our crews have corrected plenty of PGT installs that other contractors set out of plumb or under-flashed, and the failures we see most often - fogged glass units, corroded weep holes, rollers worn from daily sliding - are all things we address with the original spec in hand, not a guess. Dale Kessler has been measuring, setting, and sealing windows and doors in this region for the better part of two decades, and the standard here is the same one he learned from his father: a callback is a character flaw. We’re an independent PGT service company, which means our loyalty is to the homeowner and the install, not to a manufacturer’s sales targets. PGT sales & service done by people who will still be here in thirty years.
Common PGT Windows & Doors Problems We Solve in Edgewood
- Fogging between panes from seal failure. Edgewood’s year-round humidity and intense Central Florida UV accelerate seal degradation in insulated glass units faster than drier climates do. Once the desiccant inside the spacer is saturated, the unit fogs permanently. We replace failed IGUs with quality spacers and gas fill selected for Florida conditions, not whatever the distributor has on the shelf.
- Corrosion at weep holes in aluminum frames. Homes near the MCO flight corridors get more airborne particulates than neighborhoods further out, and that grit mixed with humidity settles into frame tracks and weep holes. We clean, treat, and where necessary replace corroded frame sections so the drainage path works like it should.
- Roller and track wear on WinGuard sliding glass doors. Edgewood yards are sandy, and that sand ends up in door tracks. Daily operation grinds it into the rollers until the door drags or binds. We stock genuine PGT rollers and tracks, and we replace both together so the door moves right.
- Failed interlock seals on casement windows. Summer thunderstorms in Orange County dump water fast, and when the interlock seal between casement sash panels fails, the bottom corner leaks. We replace the seal and check the sash alignment, because even a new seal won’t hold if the hardware is pulling the sash out of square.
- Out-of-plumb installs on original CBS openings. We regularly see PGT units set into 1960s concrete block openings that were never properly shimmed or flashed. The window racks, the operator binds, and water finds its way in around the frame. We pull the unit, correct the rough opening, and reset it true.
PGT Service in Edgewood: What Local Conditions Mean for Your Equipment
Edgewood is an enclave completely surrounded by Orlando, and its residential streets sit directly beneath the approach and departure corridors for Orlando International Airport. Portions of the city fall inside the FAA’s 65 DNL noise contour, which means the acoustic load isn’t an occasional nuisance - it’s a measured, mapped condition that shapes what a good window actually is here. Homeowners in Edgewood routinely ask for windows with an STC rating of 35 or higher, a request you almost never hear in Kissimmee or Sanford. That’s why we lean heavily on PGT WinGuard laminated impact units for replacement work in this city. The same interlayer that gives WinGuard its impact rating is what cuts aircraft noise; a laminated unit rated STC 35 or better does double duty in Edgewood, where code compliance and acoustic performance are both on the table. Some residents have been through airport noise insulation assistance programs, which set a high local benchmark for what “good windows” means. Contractors working in Edgewood who don’t understand the noise contour are quoting from a generic playbook. Our techs quote with the contour in mind, because the homeowner on the phone saying “the 6 a.m. departure bank wakes me up” is talking about a specific, verifiable condition of living here, not a preference.
One recent job illustrates what this looks like on the ground. We replaced six original jalousie windows on a 1968 CBS ranch near Hoffner Avenue with PGT 5500 Series fixed and awning impact units after the homeowner played us the MCO noise complaint recording. We pulled permits, re-flashed every opening for wind-borne debris compliance, and set the new windows with sound-dampening foam. The homeowner told us they slept through the first morning’s departure bank after the install. That’s the job done right in Edgewood.
PGT Models & Products We Service in Edgewood
We service the PGT model lines that actually exist in Edgewood’s housing stock: WinGuard Aluminum Impact, PremierVue Vinyl, SpectraGuard, and the 5500 Series. For common repair parts - rollers, locks, weatherstripping, balance tubes - we keep genuine PGT stock on our trucks so a repair visit doesn’t turn into a parts hunt. When a PGT unit is out of production, we source quality aftermarket components that match the original spec, and we tell you on the estimate which is which. We recommend repair when the frame is sound and the glass is intact. When the frame is corroded past the point of a reliable fix, or the glass package is blown, a newer PGT impact model usually costs less over the long run than patching an old unit. Sub-services that matter most in Edgewood: hurricane impact windows, energy-efficient upgrades, and full-frame replacement, because this city’s original stock predates current Florida Building Code wind-load requirements.
PGT Service Pricing in Edgewood
PGT work in Edgewood runs on a range, not a flat rate. A single sash repair or hardware replacement typically lands between $150 and $400. Replacing a failed insulated glass unit runs $350 to $700 per window depending on size and glass package. Full-frame replacement with PGT WinGuard impact units starts around $1,200 per window and can reach $2,800 or more for large openings with high STC-rated laminated glass. What drives the cost here: the retrofit reality of working in concrete block openings that are rarely square, the product approval requirements for Orange County’s wind-borne debris region, and the acoustic specifications that come with living under MCO’s noise contour. Every estimate we write is line-item, on paper, with both warranty layers registered before the truck leaves the driveway. That’s the Keystone Standard, and we don’t argue it after the fact. Call (813) 320-9346 for an exact quote. Estimates are free.
Serving Edgewood, FL - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Edgewood
Yes. PGT WinGuard laminated impact units carry STC ratings that reach into the mid-to-high 30s depending on the glass package and frame configuration. The laminated interlayer that provides impact resistance is the same component that attenuates aircraft noise. For Edgewood homes inside the 65 DNL noise contour, we typically specify WinGuard units with laminated glass rated STC 35 or higher. Call (813) 320-9346 and we’ll look at your exact exposure and quote the right glass package.
In most cases, yes. The original openings on Edgewood’s 1960s CBS ranches were framed tight for single-pane aluminum or jalousie windows, but a qualified installer can set a PGT impact unit using the correct jamb depths and fastening schedule. The work requires pulling the old frame, prepping the block surface, and re-flashing to current code. It’s more involved than swapping into a wood-framed opening, but rebuilding the wall is rarely necessary. If it needs to be in writing to be true, we will put it in writing.
That’s usually a failed interlock seal at the meeting rail intersection, sometimes aggravated by sash hardware pulling the panels slightly out of square. Edgewood’s summer thunderstorms deliver wind-driven rain that finds the weakest point in the seal path, and the bottom corner is where it shows up. Replacing the seal without correcting the sash alignment won’t hold. We replace both and check the hardware as part of the same visit. Call (813) 320-9346 to schedule a repair.
PGT’s product warranty is tied to the window itself, not to who installed it - provided the installation meets the manufacturer’s requirements and the warranty is registered correctly. We’re an independent PGT service provider, not a manufacturer-authorized dealer, so we don’t speak for PGT’s warranty department. What we do is register both warranty layers in writing on every install we perform, so there’s no question about what’s covered and for how long. That’s our standard, and we don’t make exceptions on it.
An early-2000s PGT sliding glass door may or may not meet current code, depending on the model and whether it carries a Florida Product Approval listing for the wind zone Edgewood falls under. We check the product approval number on the unit and match it against current Orange County requirements. If the door doesn’t meet code, we’ll tell you plainly, and we’ll quote our Door Installation in Edgewood with a replacement that does. Call (813) 320-9346 for an assessment.
Service Areas Near Edgewood
We serve Edgewood and the surrounding area, including Edgewood service area work throughout the city’s neighborhoods. Our PGT service extends to nearby communities as well. We handle PGT service in El Portal and PGT service in Eustis, along with Acacia Villas, Alafaya, and Altamonte Springs. If you’re within driving distance of Edgewood, chances are we’re already working in your neighborhood.
Book Your PGT Service in Edgewood Today
Call (813) 320-9346 to schedule your free estimate. A live person answers the phone 24 hours a day, 7 days a week - no voicemail, no callback form. We’ll talk through your PGT issue, get a tech out to measure twice, and put your quote in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Edgewood and Central Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.