Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Sewall’s Point, FL | TruePane Windows & Doors
We provide independent PGT Sewall’s Point Window Installation and door service across Sewall’s Point, and the one thing that sets our work here apart is simple: this peninsula punishes aluminum faster than anywhere else in Martin County. Every home sits inside the saltwater influence boundary, so we plan every PGT repair and replacement around corrosion timelines most mainland contractors never see. If your WinGuard slider is binding or your SpectraGuard frame is pitting, call (813) 320-9346 and we’ll come measure and quote it straight.
Why Sewall’s Point Residents Choose Us for PGT Service
Dale Kessler has been setting and sealing windows and doors across the Tampa Bay area for the better part of two decades, and TruePane has been doing this work since 2008. More relevant to you: we’re an independent PGT service provider, which means we are not manufacturer-affiliated or authorized, and our loyalty is to your opening, not to a PGT sales target. We service WinGuard, SpectraGuard, and ClassicVue units every week, which means we know these frames and hardware by touch. Sewall’s Point homeowners call us for Sewall’s Point Door Installation because we keep OEM PGT hardware and marine-grade aftermarket parts stocked for this specific island’s failure modes, and because when we say a door is worth repairing, we can show you why on paper. We register both warranty layers in writing before the truck leaves the driveway. No arguing, no fine print that evaporates. That is the Keystone Standard, and every job we do carries it along with the 90-Day Done Right Promise.
Common PGT Windows & Doors Problems We Solve in Sewall’s Point
- Sliding glass door tracks seized with salt corrosion. We regularly see WinGuard Aluminum Impact Sliding Glass Doors on 8-to-12-year-old homes in Sewall’s Point where the lower roller assembly has locked up tight. The lagoon air reaches every elevation on this peninsula, so a door set back from the water fails like one sitting directly on it.
- Aluminum frames pitting along the bottom rail. ClassicVue Aluminum Impact Casements and WinGuard sliders bloom worst on northeast and southeast elevations, where persistent lagoon spray drives salt into the extrusion. The pitting is cosmetic at first, then it eats into the weatherstripping channel and starts leaking.
- Weep holes clogged with salt crystals and sand. On older WinGuard sliders, clogged weeps back water into the track. The sill rots from inside the extrusion where you cannot see it until a storm-driven rain pushes water over the interior track.
- Factory stainless anchors corroded and swollen in concrete openings. We have had to grind out original anchors and pour new epoxy before a new PGT unit could even be test-fit. This is a Sewall’s Point signature problem, not something you see on mainland Stuart jobs.
- Impact French door failures with intact glass. WinGuard Aluminum Impact French Doors fail on this island most often because the inactive panel’s strike hardware corrodes and the leaf sags, throwing the lock out of alignment. The glass is fine. The frame is the problem.
PGT Service in Sewall’s Point: What Local Conditions Mean for Your Equipment
Unlike Stuart or Jensen Beach, Sewall’s Point has no mapped inland zone. Every single lot, from South Sewall’s Point Road to the houses set back on Heritage Way, sits inside the 1,500-foot saltwater influence boundary of the St. Lucie River or Indian River Lagoon. Martin County applies the same corrosion-resistant flashing and anchor detail requirements to a house in the middle of the island as to one directly on the lagoon. That means a 10-year-old PGT sliding door in Sewall’s Point can fail like a 25-year-old coastal unit anywhere else. We plan for that compressed timeline on every job, and we quote with it in mind.
PGT Models & Products We Service in Sewall’s Point
We service the full PGT residential impact line: WinGuard Aluminum Impact Sliding Glass Doors, SpectraGuard Vinyl Impact Single Hungs, ClassicVue Aluminum Impact Casements, and WinGuard Aluminum Impact French Doors. When the frame is sound, we use OEM PGT hardware and glass. When corrosion has pitted an older component beyond reliable service, we recommend a marine-grade aftermarket replacement that meets Miami-Dade NOA standards. We will tell you plainly when a track replacement on a 12-year-old WinGuard door is throwing good money after bad, and a full slider upgrade is the honest answer.
PGT Service Pricing in Sewall’s Point
Most PGT service calls in Sewall’s Point run between $85 and $300 for on-site work like track rebuilds, hardware replacement, and resealing. Full hardware sets on a WinGuard slider typically fall between $95 and $250, while replacing an impact-rated insulated glass unit can range from $250 to $1,000 depending on size and tint. Complete replacement of a salt-seized WinGuard slider starts around $1,200 and goes up with size and frame condition. What drives the cost here is corrosion, which adds anchor work and sill repair that a mainland quote does not include. Every estimate is free, line-itemed, and fixed before work starts. Call (813) 320-9346 for an exact number on your opening.
Serving Sewall’s Point, FL - Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Sewall’s Point
Sewall’s Point is fully encircled by the St. Lucie River and Indian River Lagoon, so every home sits within the saltwater influence zone with no inland buffer. Stuart has interior neighborhoods that avoid the worst of it. On this peninsula, the salt-laden humidity attacks roller assemblies and tracks on every elevation, every day. We see 8-to-12-year-old tracks seized on homes set well back from the water. Call (813) 320-9346 for a track assessment, and we’ll tell you if a rebuild or a full replacement is the square deal.
It depends on where the corrosion has reached. Surface pitting along the bottom rail can often be cleaned, treated, and resealed. If the pitting has eaten into the weatherstripping channel or compromised the corner welds, repair becomes a temporary fix on borrowed time. We’ll show you the frame with the sash pulled so you can see exactly what we’re looking at before you spend a dollar.
Yes. Martin County requires corrosion-resistant flashing and anchor details for every lot on this island, because there is no mapped inland zone here. We follow that standard on every PGT install in Sewall’s Point, whether the house is on South Sewall’s Point Road or set back on a side street. If it needs to be in writing to be true, we will put it in writing.
The inactive panel’s strike hardware corrodes and the leaf sags, which throws the lock out of alignment. The glass is fine, and the homeowner usually blames the lock first. We adjust or replace the hardware, realign the leaf, and the door locks tight again. If the frame itself has shifted, we’ll quote the repair honestly rather than selling you a new door you might not need. Call (813) 320-9346 for a free estimate.
The honest answer is that most 1960s-built homes on this island need full tear-out, not inserts. The original aluminum frames are usually too corroded and out of square to hold a modern impact-rated insert properly, and retrofitting into a salt-compromised frame voids the performance you’re paying for. We evaluate the existing opening with a level and a moisture meter, then quote you what the structure actually requires. Your estimate is free and fixed. Call (813) 320-9346 to schedule it.
Service Areas Near Sewall’s Point
We work across Sewall’s Point and the surrounding Martin County and Treasure Coast communities. You can learn more about our Sewall’s Point service area and our broader PGT sales & service coverage. We also provide PGT service in South Bay and South Miami for clients with properties in those areas. If you’re in Sewall’s Point or nearby, call and we’ll tell you when we can be there.
Book Your PGT Service in Sewall’s Point Today
If your PGT window or door is binding, pitting, or leaking, call (813) 320-9346. We’ll send a background-checked, uniformed technician to measure, assess, and quote the job in writing. Free estimates, no pressure, and no surprises on the bill. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sewall’s Point since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.