Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Energy-Efficient Windows in Tampa: What to Know First
TruePane Windows & Doors provides independent Therma-Tru energy-efficient window repair, glass replacement, and full-frame retrofit work throughout Tampa. Most Therma-Tru energy-efficient window jobs take us one visit, and a typical insulated glass replacement with Low-E and argon for a Therma-Tru entry or patio unit runs roughly $400 to $900 per sash depending on size and glass package. We are not the low bid, and we don’t pretend to be. What we offer is a square deal on paper before the work starts, with both warranty layers registered in writing.
This page is written for Tampa homeowners who already own Therma-Tru windows or doors and are dealing with fogged glass, drafty frames, or faded furniture from UV bleed. If that’s you, call (813) 320-9346 and a live person will answer, day or night.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid entry door, and their window line shares a lot of the same DNA. But energy-efficient windows live or die on the seal, and Florida humidity finds every weak one. Here’s what we see on Therma-Tru jobs in Tampa:
- Fogged insulated glass on Therma-Tru Classic-Craft and Slim-Line units. The dual-pane seal fails, Tampa humidity gets pulled between the panes, and you get that permanent haze. The cause is almost always seal fatigue from daily thermal cycling, sun on one side and AC on the other. We replace the insulated glass unit (IGU) with a Low-E argon-filled match to the original spec, not a downgraded generic pane.
- Drafting around Therma-Tru casement and awning windows. The compression weatherstripping on these units flattens over five to seven Florida summers. You’ll feel air moving at the sash edges even when the window is locked. We replace the weatherstripping with an aftermarket profile cut to the exact Therma-Tru channel, then adjust the locking points so the sash seats tight.
- Solar heat gain through older Therma-Tru single-pane and clear-glass units. Some Tampa homes still have original 1990s Therma-Tru windows with no Low-E coating at all. Those crank up the AC bill every afternoon from May through October. We template and install ENERGY STAR-rated Low-E insulated glass, matched to the existing frames, so you keep the look and lose the heat.
- UV fade damage through unprotected Therma-Tru glass in sun-facing rooms. You’ll see it on furniture and flooring: a bleached band where the afternoon sun comes through clear glass. We offer UV-blocking laminated and Low-E packages that cut fade while keeping the visible light, and we’ll show you the spec sheet before we order anything.
- Hardware and operator wear on Therma-Tru sliding window assemblies. Tampa’s salt air and humidity age the rollers and tracks. The window gets harder to open, which means it gets opened less, which means the room gets hotter. We replace rollers, clean and lubricate the tracks, and get the sash moving the way it should.
One note from Dale Kessler, our owner: more than half the Therma-Tru windows we’re called out for are not failed windows at all. They’re failed installations around the window. A window can be square and true, but if the rough opening wasn’t flashed and sealed right in a Tampa rainstorm, the air and moisture get around it. We check the unit and the opening both.
Our Therma-Tru Energy-Efficient Windows Process
Every Therma-Tru job follows the same discipline, start to finish. Here’s what we do:
- 1
We measure everything twice. Before quoting, we measure the existing unit, the rough opening, and the reveal on all four sides. Therma-Tru sizes vary by series and year, and guessing costs money.
- 2
We diagnose the actual failure. Fogged glass, drafty sash, failed operator: we identify what’s wrong and explain it in plain language, on site.
- 3
We quote your options on paper. OEM Therma-Tru replacement glass where the warranty or frame condition calls for it, and quality aftermarket glass where it makes better sense. Both prices side by side, your call.
- 4
We set the glass or sash and seal it right. No shortcuts on the glazing tape, the setting blocks, or the exterior seal. Dale’s rule still runs the shop: if the pane is not true, the job is not done.
- 5
We test before we clean up. We check the operation, the lock, the air seal, and the drainage path. Then we clean the glass, haul the old unit away, and leave the site tidy.
- 6
We register your warranty in writing. Both layers: the manufacturer’s and ours. The 90-Day Done Right Promise covers our workmanship, and the paperwork is in your hand before the truck leaves the driveway.
What Therma-Tru Energy-Efficient Windows Costs in Tampa
Here’s what Tampa homeowners can expect to pay for common Therma-Tru window work, installed:
- Insulated glass replacement, single sash (Low-E, argon): $425-$650
- Full window replacement, standard-sized Therma-Tru double-hung: $800-$1,400 per opening
- Weatherstripping and sash adjustment on a Therma-Tru casement: $185-$320 per window
- UV-blocking or laminated glass upgrade on a Therma-Tru window: $550-$950 per sash
- Whole-home energy-efficient window replacement (10-14 openings): $9,500-$18,000 depending on glass package and frame condition
What moves the price is the glass package (clear vs. Low-E vs. UV-laminated), the window size, and the condition of the frame. We quote a fixed number before we start, and we don’t come back with change orders. Call (813) 320-9346 and we’ll give you a written estimate you can hold onto.
Why Tampa Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been doing this since 2008 across Tampa Bay, led by Dale Kessler, a second-generation glazier who grew up in Seminole Heights and still lives about six blocks from where he learned to ride a bike. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. A live person answers our phone 24 hours a day, every day. And we stand behind every Therma-Tru job with the 90-Day Done Right Promise, backed by The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave your driveway.
When a Therma-Tru window isn’t worth saving, we’ll tell you that too. We install more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, so we have honest alternatives if a different product fits your house and budget better. We quote side by side on paper and let you decide.
FAQs
In most cases we can replace just the insulated glass unit and keep your existing frame, as long as the frame and sash are structurally sound. The exception is when the frame itself has rot or water damage, at which point a full replacement is the honest fix. Call (813) 320-9346 and we’ll tell you which applies to your situation, on paper.
If your Therma-Tru window is still under the manufacturer’s warranty, we will work with that warranty. We handle the paperwork and registration so the claim is processed correctly. If the unit is out of warranty, we install a quality aftermarket insulated glass unit with its own manufacturer-backed glass warranty, and our 90-Day Done Right Promise stands regardless.
A fogged insulated glass replacement on a Therma-Tru window in Tampa typically runs $425 to $650 per sash, installed, depending on size and glass package. The fog will not go away on its own; the seal is gone and the argon has leaked out. Call (813) 320-9346 for an exact quote, free.
Most Therma-Tru window repairs are completed in a single visit. For glass replacements that require custom templating and fabrication, we’re typically back for installation within one to two weeks. A live person answers our phone 24/7, so you’ll get a straight answer on scheduling when you call (813) 320-9346.
When a job requires a permit under Tampa code, we pull it, and we get the inspection passed. Full-frame window replacements often require permitting; glass-only replacements typically don’t. We’ll tell you which applies before work begins, and the permit cost is in the quote, not a surprise line item later.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Tampa and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.