VLX 80 Casement Window

VLX 80 Casement Window in Tampa, FL | TruePane Windows & Doors

The VLX 80 Casement Window is a side-hinged aluminum window built around two ideas: ultra-narrow sightlines and maximum ventilation. For Tampa homeowners, that combination means more glass, more breeze, and a frame that holds up to Florida’s heat, humidity, and storm-season wind loads. TruePane Windows & Doors is an authorized ViewLux installation partner, which means we sell, measure, and install this exact window to factory spec, with the AAMA-certified installation process the warranty requires. Whether you’re replacing rusted-out builder windows in Carrollwood or outfitting a new build in Channelside, this is a window worth a close look. Call (813) 320-9346 for pricing and availability.

Call (813) 320-9346

Product Overview - VLX 80 Casement Window

The VLX 80 is what you choose when you want a window that gets out of its own way. The side-hinged casement design means the entire sash opens outward, catching Gulf breezes and channeling them into the room. Unlike a sliding window that only opens halfway, a casement opens fully, so you get the whole opening working for airflow. In a place like Tampa, where we run ceiling fans nine months a year, that’s not a marketing line. That’s comfort.

The frame is aluminum, but not the thick, clunky aluminum people remember from 1980s Florida condos. ViewLux engineers this series with a 1.97-inch profile width that keeps the frame itself visually quiet while the glass does the talking. The wall thickness on the extrusions runs 0.079 inches, which gives the sash real structural rigidity without turning the window into a heavy industrial fixture.

Where this window earns its reputation is in the details: a thermal break that separates the interior and exterior aluminum so heat doesn’t telegraph through the frame, multi-point hardware that pulls the sash tight against the weatherstripping, and corner construction that stays square over decades of use. We see this window specified most often in modern and contemporary homes, but it reads just as comfortably on a renovated 1950s ranch in Seminole Heights as it does on a new custom build in Bayshore Beautiful. The narrow sightlines work with almost any architecture.

As authorized installers, TruePane Windows & Doors gets these windows directly through the proper ViewLux channel, with full factory warranty protection. We’ve installed them in homes from Westchase to Brandon, and we can walk you through how this specific series performs in a Tampa climate, not just on a spec sheet written for a national audience.

Technical Specifications

Here’s the VLX 80 Casement Window broken down into the numbers and options that matter for a Tampa installation. These are the specs from the manufacturer, reworded so you can actually compare them against other windows you may be considering.

• Frame material: Extruded aluminum with thermal break
• Wall thickness: 0.079 inches at the extrusion
• Profile width: 1.97 inches visible frame face
• Operation: Side-hinged casement, crank-out or lever operation
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Sill options: Standard Sill, Low-Profile Sill
• Performance standards: NFRC-rated energy performance, AAMA 2400/2410 installation compliance, AAMA 812 sealant spec
• Impact option: Impact-resistant laminated glass available for wind-borne debris regions

If you’re comparing this against a vinyl window of similar size, pay attention to the profile width and wall thickness. Those two numbers are why this window can carry a larger pane of glass with less frame showing, and why it won’t sag in a Tampa home that runs the AC hard from May through October.

Performance Features

Thermal Efficiency - The VLX 80 uses a thermal break, which is a non-conductive barrier separating the aluminum inside from the aluminum outside. Without it, aluminum frames transfer heat straight into your house in August. With it, the window earns NFRC ratings that keep your cooling bill from spiking. In Tampa, this matters every single month except maybe January.

Acoustic Performance - Aluminum frames with this extrusion wall thickness take weatherstripping well, and tight weatherstripping means less noise bleed. If you live near Dale Mabry, I-275, or a school car line, the sound control this window provides is real. Pair it with laminated glass and you’ll notice the difference immediately.

Airtightness & Weather Seal - Casement windows seal better than sliders by design. When the sash closes, the multi-point hardware compresses the gasket along all four edges. No air leaks through the corners. In Tampa humidity, that means drier indoor air and less condensation on the glass, which helps prevent the musty smell that Florida bedrooms get when windows leak.

Waterproofing - The frame is engineered for drainage, with integrated weep channels that move water out of the track rather than into your wall. On the installation side, we add a AAMA 812 low-expansion foam seal around every perimeter joint so that even during a summer afternoon downpour, water has no path inside.

Wind Resistance - The VLX 80 is wind-load rated for local climate requirements, and the laminated glass option gives you a impact-resistant assembly for wind-borne debris zones. Let’s be honest about what wind-load rating means in Tampa: it means the window won’t flex, whistle, or fail when a summer squall pushes 60 mph gusts through your neighborhood.

Security & Hardware - The multi-point locking hardware engages at multiple points around the sash, not just one latch at the handle. That’s a harder window to pry open than a single-latch sliding window. The aluminum frame adds another layer of physical resistance compared to hollow vinyl. It’s not a burglar-proof vault, but it’s a meaningful step up.

Color & Glass Options

The VLX 80 comes in six finishes, and some work better than others in Tampa’s light. Premium Black reads as sharp and architectural, especially against white stucco or light brick. Pure White stays bright on the interior and disappears into coastal interiors. Anodized Silver has a brushed metallic finish that tracks with yacht-modern design in South Tampa. Bronze is warmer, and it hides dirt better in a high-pollen Tampa spring. Champagne is trending in modern farmhouse builds and renovated bungalows in Seminole Heights. Teak Wood brings a timber look to aluminum, so you get the warmth of wood without the rot and termite risk that come with actual wood windows in Florida humidity.

On glass, the biggest decision for Tampa is usually Low-E versus laminated. Low-E is the coating that reflects solar heat, and we recommend it on every VLX 80 that faces any direction other than full shade. Laminated glass is the impact-rated option, and it also kills sound, which is why so many of our clients on busy streets in Brandon and Riverview choose it. Tempered glass is required in certain code locations like doors and low windows. Frosted glass works for bathrooms and side windows where you want light without neighbors seeing in. Clear is, well, clear, and fine for protected exposures.

Installation by TruePane Windows & Doors in Tampa

A window is only as good as the person who puts it in. That is not a sales line. We’ve torn out expensive windows in Tampa homes where the previous installer used minimal fasteners, skipped the flashing, and called it done. The window was never the problem. The installation was.

Every VLX 80 we install starts with a pre-install inspection of the opening. We check the rough opening dimensions against the factory order, verify the framing is sound and square, and look for hidden water damage or rot that needs to be addressed before a new window goes in. In Tampa, that’s a bigger issue than people realize, because we get wind-driven rain and high humidity, and older homes in neighborhoods like Ybor City and Seminole Heights have had decades of exposure.

On install day, we set every window level, plumb, and square. That’s non-negotiable, because a casement window that’s set a degree out of square binds at the hinges, wears the hardware, and won’t seal. We fasten per manufacturer spec and local code, then run a continuous AAMA 812 low-expansion foam seal around all four perimeter joints. That’s the sealant standard that keeps air, water, and insects out without expanding so much that it bows the frame. We follow AAMA 2400/2410 installation standards, which is the recognized framework for the proper installation of windows and doors in the U.S.

Finally, we run a water test around the perimeter, verify the sash opens and closes without drag, and clean up. The work area looks like we were never there, except you have a new window. Call (813) 320-9346 to schedule a free measurement.

Frequently Asked Questions - VLX 80 Casement Window

What is the lead time for the VLX 80 Casement Window? The VLX 80 Casement Window is typically available in 3 to 5 weeks from order, depending on the finish and glass combination. Custom sizes and impact glass can push that toward 6 or 7 weeks. TruePane Windows & Doors will give you a firm delivery window when we finalize your order, and we’ll schedule installation around it. Call (813) 320-9346 to get a current lead time for your specific configuration.

Does the VLX 80 qualify for energy tax credits? The VLX 80 Casement Window with Low-E glass can qualify for federal energy tax credits if it meets the most current Energy Star criteria for the South climate zone, which includes Tampa. The credit applies to the window cost, not installation labor, and we’ll help you verify whether your selected glass package qualifies before you order. Speak with our team at (813) 320-9346 for details.

What warranty comes with the Casement Window? ViewLux provides a manufacturer warranty on the VLX 80 when it is installed by an authorized partner like TruePane Windows & Doors. The warranty covers the frame and hardware against defects in materials and workmanship, and the glass against seal failure. The key detail for Tampa homeowners: the warranty is only valid if the window is installed per manufacturer instructions, which is exactly how we install every unit.

Can I customize the size? Yes. The VLX 80 Casement Window is built to order, not pulled off a shelf, so you can order custom widths and heights to match your existing rough openings or your architect’s drawings. We’ll measure precisely in Tampa and confirm your sizes before the order goes to ViewLux. That’s how you avoid the mistake of ordering windows that don’t fit your actual openings.

How do I maintain aluminum frames? Aluminum frames on the VLX 80 are essentially maintenance-free: wash them with mild soap and water twice a year, keep the tracks free of debris, and lubricate the hinges occasionally with a dry lubricant. In Tampa’s salt air near the bay, an extra rinse every few months helps prevent salt buildup on the finish. The thermal break and the factory finish are not items you ever need to repaint or reseal. Call (813) 320-9346 if you ever have a hardware issue; we’ll order parts and handle it.

Get a Quote - VLX 80 Casement Window in Tampa

If you’re researching the VLX 80 Casement Window, you’re past the hard part. You know what you want. Now it’s a matter of getting accurate numbers for your home in Tampa. TruePane Windows & Doors provides free on-site measurements and detailed, written quotes with no pressure. Call (813) 320-9346 to schedule your appointment, or ask us anything still on your mind about glass, finish, lead times, or installation.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Tampa, FL.